.png){kind=icon}
返回
Selective Electroplating for 3D-Printed Electronics
.png){kind=icon}
PRE
AI
DOI：10.1002/admt.201900126.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Creating 3D-printed parts with embedded circuitry is the next frontier in additive manufacturing, but printing of conductors with performance comparable to bulk metals such as copper is a difficult challenge. A hybrid process based on 3D printing followed by electroplating on highly conductive thermoplastic filament is used to manufacture 3D circuit boards and electronic packaging. Dual extruder heads on a standard fused filament fabrication printer are used to selectively define regions for electroplating, allowing distinct traces and multiple materials to be patterned in the same 3D-printed parts. Using this approach, a 3D-printed surface-mount package and a 555 timer oscillator circuit are demonstrated, including soldering of components onto the electroplated copper surface.
Keyword:
3D printing
composite filament
electroplating
fused filament fabrication
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.2
论文数:
5.3K
被引数:
2.4W
机构
引用论文
3D Printing for the Rapid Prototyping of Structural Electronics用于结构电子产品快速原型制作的3D打印.png)
IEEE ACCESS
OAAI
IEEE ACCESSIF3.6
OAAI分享收藏Polyethylene glycol/Cu/SiO2 form stable composite phase change materials: preparation, characterization, and thermal conductivity enhancementRSC Advances
RSC AdvancesIF0
PREAI
分享收藏Responses of the nucleus accumbens following fornix/fimbria stimulation in the rat. Identification and long-term potentiation of mono- and polysynaptic pathways伏核在大鼠中受到fornix/fimbria刺激后的反应。单和多突触途径的鉴定和长期增强NeuroscienceOAAI
NeuroscienceIF0
OAAI分享收藏
查看更多内容