.png){kind=icon}
.png){kind=icon}
Return
Model predictive control system design and implementation for spacecraft rendezvous
.png){kind=icon}
OA
AI
DOI：10.1016/j.conengprac.2012.03.009.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper presents the design and implementation of a model predictive control (MPC) system to guide and control a chasing spacecraft during rendezvous with a passive target spacecraft in an elliptical or circular orbit, from the point of target detection all the way to capture. To achieve an efficient system design, the rendezvous manoeuvre has been partitioned into three main phases based on the range of operation, plus a collision-avoidance manoeuvre to be used in event of a fault. Each has its own associated MPC controller. Linear time-varying models are used to enable trajectory predictions in elliptical orbits, whilst a variable prediction horizon is used to achieve finite-time completion of manoeuvres, and a 1-norm cost on velocity change minimises propellant consumption. Constraints are imposed to ensure that trajectories do not collide with the target. A key feature of the design is the implementation of non-convex constraints as switched convex constraints, enabling the use of convex linear and quadratic programming. The system is implemented using commercial-off-the-shelf tools with deployment using automatic code generation in mind, and validated by closed-loop simulation. A significant reduction in total propellant consumption in comparison with a baseline benchmark solution is observed. (C) 2012 Elsevier Ltd. All rights reserved.
Keywords:
Constraints
Embedded systems
Optimisation
Path planning
Predictive control
Spacecraft autonomy
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.6
Papers:
5.6K
Citations:
1.1W