logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
BackJournal Details
I

International Journal of Lightweight Materials and Manufacture

IF
Papers32
Citations
Journal Papers 32
Publication Date
delete
Effect of incorporating high-entropy alloy interlayer on the microstructure and mechanical properties of Mg/steel resistance spot welded joints
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete1
PREAI
deleteHeng, Shangguan; Min, Shiqiang; Cheng, Donghai; Xiong, Zhenyu; Liu, Zemin
deleteShare
deleteSave
Optimisation of welding parameters for ultrasonically assisted resistance spot welding of pure titanium Grade 2 and aluminium alloy 5754
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete2
PREAI
deleteZhao, Dawei; Vdonin, Nikita; Radionova, Lyudmila; Glebov, Lev; Ivanov, Vasiliy
deleteShare
deleteSave
Investigating the impact of layer thickness and print orientation on strength and structural integrity of SLA 3D printed composites
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete5
PREAI
deleteSaha, Rotan Kumar; Rahman, Md Mustafizur; Islam, Md Tutul; Mumin, Md Mukshitul; Ray, Narayan Chandra
deleteShare
deleteSave
Investigation into the effectiveness of a centralised magnetic yoke in the magnetorheological finishing technique using shear fluid for SUS 304 material
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete0
PREAI
deleteNguyen, Minh Quang; Hoang, Van Thang; Nguyen, Tien Tung; Phuong, Thanh Le Thi; Nguyen, Chi Tam; Ngoc, Hoanh Dao; Nguyen, Duc Minh; Nguyen, Duy Trinh
deleteShare
deleteSave
Processing of lightweight Cu-intermetallic-Al composite through cyclic accumulative roll bonding and intermediate annealing
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete0
PREAI
deleteSoltani, Zahra; Ghazani, Mehdi Shaban; Eghbali, Beitallah
deleteShare
deleteSave
Laser welding of Al6061 alloy with dynamic beam shape
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete1
PREAI
deleteKovalevsky, Aleksey; Baulin, Denis; Armon, Nina; Ariely, Shmuel; Zohar-Hauber, Keren; Katz-Demyanetz, Alexander
deleteShare
deleteSave
Hybrid technique of MARCOS-Taguchi approach for multi-purpose optimization of friction stir spot welded AA6063 alloy integrated with silicon carbide and graphite
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete8
PREAI
deleteSabry, Ibrahim; Mourad, Abdel-Hamid I.; ElWakil, Mohamed; Naseri, Majid
deleteShare
deleteSave
Rotational molding processing performance and structure of high-density polyethylene (HDPE) composites with basalt powder (BP) and talc (T): The influence of mold wall thickness and filler type
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete2
PREAI
deleteBarczewski, Mateusz; Anisko-Michalak, Joanna; Mietlinski, Patryk; Szulc, Joanna; Bartnicki, Adrian; Szostak, Marek; Hejna, Aleksander
deleteShare
deleteSave
Multifunctional performance enhancement of polypropylene nanocomposites via dual filler hybridization: Mechanical, viscoelastic, creep, aging, and repairability analysis
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete0
PREAI
deleteLeena, Snaha; Bhagavatula, Sai Gopal Krishna; Nanoth, Rasana; Karingamanna, Jayanarayanan; Rajan, Krishna Prasad
deleteShare
deleteSave
Development of lightweight magnesium composites reinforced with FeCoCrNiMn high entropy alloy via powder metallurgy
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-03-01
delete1
PREAI
deleteGopal, P. M.; Kavimani, V.; Suresh, S.; Sudhagar, S.
deleteShare
deleteSave
Fabrication of an isotropic Ti-3Al-8V-6Cr-4Mo-4Zr alloy with a combination of high strength and good ductility
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-01-01
delete0
deleteOAAI
deleteLi, Wensheng; Chai, Yinxiang; Lin, Zhongliang; Qi, Yue; Zheng, Jie; Liu, Yan; Zuo, Dunwen; Zheng, Wenbin; Liu, Tong; Sun, Hongye; Zhang, Xiaoling; Zhao, Shuo
deleteShare
deleteSave
Design, Analysis and Development of Prosthetic and Orthotic elements by Additive Manufacturing process (vol 8, pg 205, 2025)
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-01-01
delete0
deleteOAAI
deletePatel, Piyush; Gohil, Piyush
deleteShare
deleteSave
Laser powder bed fusion of AlSi10Mg with increased layer thickness for higher building rate
deleteINTERNATIONAL JOURNAL OF LIGHTWEIGHT MATERIALS AND MANUFACTURE
IF0
delete2026-01-01
delete3
deleteOAAI
deleteChernyshikhin, Stanislav; Fedorenko, Leonid; Egorov, Vladimir; Zotov, Boris; Brykin, Veniamin; Korobov, Konstantin; Nalivaiko, Anton; Zherebtsov, Dmitriy; Lyange, Maria; Pelevin, Ivan
deleteShare
deleteSave
Development of magneto-rheological polishing process with NON-Newtonian fluid and uniform magnetic yoke for surface quality Ti-6Al-4V enhancement
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-01-01
delete0
deleteOAAI
deleteQuang, Nguyen Minh; Tung, Nguyen Tien; Thanh, Le Thi Phuong; Trinh, Nguyen Duy
deleteShare
deleteSave
Resistance spot welding of DH1200 using short pulses and high currents: Effects on nugget size, microstructure, hardness, liquid metal embrittlement, and tensile shear strength
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-01-01
delete1
deleteOAAI
deleteShiri, Saeed; Schubert, Holger; Hilpert, Benjamin; Brewer, Luke N.
deleteShare
deleteSave
Experimental investigation of degradation in the marine environment of FDM-based 3D printed specimens
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2026-01-01
delete4
deleteOAAI
deleteSingaravel, B.; Niranjan, T.; Laxmireddy, P.; Srinivasulu, K.; Chakradhar, B.; Poojitha, G.
deleteShare
deleteSave
Feasibility of electrical discharge machining (EDM) of AZ31 lightweight magnesium alloy in dielectric fluids of hydrocarbon oil and deionized water
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2025-12-01
delete0
PREAI
deleteAsghari, Saeed; Shabgard, Mohammad Reza; Shalvandi, Maghsoud; Roudehchi, S. Abolfazl; Habibi, Farzad
deleteShare
deleteSave
Investigating the role of WEDM surface texturing in the degradation and biocompatibility of Mg-Zn-Ca alloy
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2025-11-01
delete0
deleteOAAI
deleteBabu, Ingilela Aswith; Sekar, Prithivirajan; Prabhu, Ashwini; Narendranath, S.; Balan, A. S. S.
deleteShare
deleteSave
Low-velocity impact response of novel hierarchical hexagonal multicell structures
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2025-11-01
delete1
deleteOAAI
deleteHafid, M.; Nurrohmad, Abian; Hidayat, Dony; Ardiansyah, Riki; Marta, Aryandi; Rosalia, Citra Asti; Ahmad, Zaini
deleteShare
deleteSave
Dynamic properties of natural fiber-reinforced polymer composite plates and tubes
deleteInternational Journal of Lightweight Materials and Manufacture
IF0
delete2025-11-01
delete1
deleteOAAI
deleteFirouzsalari, Saeed Eyvazinejad; Dizhur, Dmytro; Jayaraman, Krishnan; Ingham, Jason
deleteShare
deleteSave