logo
CanyamAI summaries for academic research
language
MobileMobile
  • Phone FeatureWeChat Mini Program
EnglishEnglish
noticeNotice
BlogBlog
delete
arrow
Back
R

Ramsey F. Hamade

American University of Beirut

24H-index
167Paper Count
1.5KCitation Count
Published Papers 30
Publication Date
logo
Extension of the cutting analytical thermal modeling: accounting for heat generation due to plastic deformation at tool-chip interface
errMachining Science and Technology
IF2.6
err2025-12-12
err0
PREAI
errIlige S. Hage; Charbel Y. Seif; Ramsey F. Hamade
errShare
errSave
On the role of capillary and viscous forces on wear and frictional performances of natural fiber composites under lubricated polishing
errWEAR
IF6.1
err2021-07-01
err7
errOAAI
errChegdani, Faissal; El Mansori, Mohamed; Taki, Mahmoud; Hamade, Ramsey
errShare
errSave
Extracting HCP Zerilli-Armstrong material parameters for magnesium alloy AZ31B from orthogonal cutting tests
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2021-04-01
err4
PREAI
errSeif, Charbel Y.; Hage, Ilige S.; Hamade, Ramsey F.
errShare
errSave
Incorporating dual BCC/FCC Zerilli-Armstrong and blue brittleness constitutive material models into Oxley's machining shear zone theory
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2020-02-01
err6
PREAI
errSeif, Charbel Y.; Hage, Ilige S.; Hamade, Ramsey F.
errShare
errSave
Life Cycle Analysis of AA Alkaline Batteries
errSUSTAINABLE MANUFACTURING - HAND IN HAND TO SUSTAINABILITY ON GLOBE
IF0
err2020-01-01
err11
errOAAI
errHamade, Ramsey; Al Ayache, Raghid; Ghanem, Makram Bou; El Masri, Sleiman; Ammouri, Ali
errShare
errSave
Optimized tabu search estimation of wear characteristics and cutting forces in compact core drilling of basalt rock using PCD tool inserts
errCOMPUTERS & INDUSTRIAL ENGINEERING
IF6.5
err2019-10-01
err14
PREAI
errHage, Re-Mi; Hage, Ilige; Ghnatios, Chady; Jawahir, I. S.; Hamade, Ramsey
errShare
errSave
Nondestructive detection of defects in friction stir welded lap joints using computed tomography
errMATERIALS & DESIGN
IF7.9
err2019-01-01
err27
errOAAI
errHamade, R. F.; Baydoun, A. M. R.
errShare
errSave
Application of ultrasonic waves towards the inspection of similar and dissimilar friction stir welded joints
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2018-05-01
err27
PREAI
errTarraf, Jaafar; Mustapha, Samir; Fakih, Mohammad Ali; Harb, Mohammad; Wang, Hongjian; Ayoub, Georges; Hamade, Ramsey
errShare
errSave
Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis
errMECHANICAL SYSTEMS AND SIGNAL PROCESSING
IF8.9
err2018-02-01
err43
PREAI
errFakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey
errShare
errSave
Intracortical stiffness of mid-diaphysis femur bovine bone: lacunar-canalicular based homogenization numerical solutions and microhardness measurements
errJOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
IF4.5
err2017-07-31
err6
PREAI
errHage, Ilige S.; Hamade, Ramsey F.
errShare
errSave
Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2016-01-01
err47
PREAI
errDorbane, A.; Ayoub, G.; Mansoor, B.; Hamade, R. F.; Kridli, G.; Shabadi, R.; Imad, A.
errShare
errSave
Relating grain size to the Zener-Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processing
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2015-08-01
err86
PREAI
errAmmouri, A. H.; Kridli, G.; Ayoub, G.; Hamade, R. F.
errShare
errSave
Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2015-01-01
err46
PREAI
errDorbane, A.; Ayoub, G.; Mansoor, B.; Hamade, R.; Kridli, G.; Imad, A.
errShare
errSave
On the selection of constitutive equation for modeling the friction stir processes of twin roll cast wrought AZ31B
errMATERIALS & DESIGN
IF7.9
err2014-05-01
err14
PREAI
errAmmouri, A. H.; Hamade, R. F.
errShare
errSave
Segmentation of histology slides of cortical bone using pulse coupled neural networks optimized by particle-swarm optimization
errCOMPUTERIZED MEDICAL IMAGING AND GRAPHICS
IF4.9
err2013-10-01
err28
PREAI
errHage, Ilige S.; Hamade, Ramsey F.
errShare
errSave
Numerical simulations of the cathodic delamination of adhesive bonded rubber/steel joints
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2012-06-01
err0
PREAI
errTarhini, A.; Hamade, R. F.
errShare
errSave
A study of the impact of the willingness-to-learn of CAD novice users on their competence development
errCOMPUTERS & INDUSTRIAL ENGINEERING
IF6.5
err2011-10-01
err6
PREAI
errHamade, Ramsey F.; Artail, Hassan A.; Jaber, Mohamad Y.
errShare
errSave
Automating dimensional tolerancing using Ripple down Rules (RDR)
errEXPERT SYSTEMS WITH APPLICATIONS
IF7.5
err2010-07-01
err6
PREAI
errBeydoun, G.; Hoffmann, A.; Hamade, R. F.
errShare
errSave
Compact core drilling in basalt rock using PCD tool inserts: Wear characteristics and cutting forces
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2010-07-01
err28
PREAI
errHamade, R. F.; Manthri, S. P.; Pusavec, F.; Zacny, K. A.; Taylor, L. A.; Dillon, O. W., Jr.; Rouch, K. E.; Jawahir, I. S.
errShare
errSave
Analyzing CAD competence with univariate and multivariate learning curve models
errCOMPUTERS & INDUSTRIAL ENGINEERING
IF6.5
err2009-05-01
err25
PREAI
errHamade, Ramsey F.; Jaber, Mohamed Y.; Sikstrom, Sverker
errShare
errSave

Research Directions

No research directions
Co-authors
Cooperation Journals
I
I.S. Jawahir
H-index: 66 · Papers: 308
M
Mohamad Y. Jaber
H-index: 65 · Papers: 278
A
A. Hoffmann
H-index: 63 · Papers: 566
M
Mohamed El Mansori
H-index: 48 · Papers: 369
D
David Dillard
H-index: 42 · Papers: 753
View more