logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
I

International Polymer Processing

IF1.9
论文数38
被引数1124
期刊论文 38
发表时间
delete
Prediction and optimization of complete cavity filling in injection molding using a data-efficient multivariable regression-genetic algorithm approach基于数据高效多变量回归-遗传算法方法的注塑成型完整型腔填充预测与优化
deleteInternational Polymer Processing
IF1.9
delete2026-07-24
delete0
PREAI
deleteQuintana, Maria Camila; Rueda, Federico; Frontini, Patricia M.
delete分享
delete收藏
Intelligent optimization strategy of process parameters for PET industrial fiber production based on data-driver基于数据驱动的PET工业纤维生产工艺参数智能优化策略
deleteInternational Polymer Processing
IF1.9
delete2026-07-24
delete0
PREAI
deleteDong, Kun; Zheng, Kaiwen; Zhang, Yinfeng; Chen, Kang; Shi, Jiaoxue; Yang, Zhichao; Chen, Shichang
delete分享
delete收藏
Tuning melt viscoelastic properties of LDPE via reactive extrusion: a dual-agent strategy using TMPTMA and Polyhexene-1通过反应性挤出调节LDPE熔体粘弹性的双剂策略：使用TMPTMA和Polyhexene-1
deleteInternational Polymer Processing
IF1.9
delete2026-03-01
delete0
PREAI
deleteJozaghkar, Mohammadreza; Mirtaleb, Fakhrossadat; Ansari, Jamilur R.; Irshad, Muhammad Sohaib; Irshad, Muhammad Kashif; Seo, Jongchul; Arabi, Hasan
delete分享
delete收藏
Influence of the process parameters on the mechanical strength of direct screw fastened SMC/BMC components工艺参数对直接螺丝固定的SMC/BMC组件机械强度的影响
deleteInternational Polymer Processing
IF1.9
delete2026-03-01
delete0
PREAI
deleteMoritzer, Elmar; Held, Christian
delete分享
delete收藏
Numerical insights into design and performance of centrifugal dryers for plastic pelletizing systems离心干燥机在塑料造粒系统中的设计与性能的数值研究
deleteInternational Polymer Processing
IF1.9
delete2026-03-01
delete0
PREAI
deleteAali, Mohammadreza; Low-Baselli, Bernhard; Berger-Weber, Gerald
delete分享
delete收藏
Introduction of an Euler-Lagrange framework for a single screw extruder based on the extended discrete element method (XDEM)基于扩展离散元方法（XDEM）的单螺杆挤出机欧拉-拉格朗日框架的引入
deleteInternational Polymer Processing
IF1.9
delete2026-03-01
delete0
PREAI
deletePeters, Bernhard
delete分享
delete收藏
Enhancing the mechanical properties and impact resistance of epoxy resin by using 3D graphene oxide nanoparticles通过使用三维氧化石墨烯纳米粒子增强环氧树脂的机械性能和抗冲击性
deleteInternational Polymer Processing
IF1.9
delete2026-02-01
delete0
PREAI
deleteKordi, Ali; Jamal-Omidi, Majid; Ebrahimzadeh, Amin
delete分享
delete收藏
Amine-based deep eutectic plasticization opens a low-energy, high-flow processing window and improves ductility retention in banana fiber-reinforced thermoplastic starch composites胺基类深共熔增塑剂为香蕉纤维增强热塑性淀粉复合材料开辟了低能耗、高流动性加工窗口，并提高了其韧性保持率
deleteInternational Polymer Processing
IF1.9
delete2026-02-01
delete0
PREAI
deleteQuan, Thuy Cam; Hoang, Phuong Thi; Tran-Lam, Thanh-Thien; Dao, Yen Hai
delete分享
delete收藏
Streamlining melt flow in single-screw extruders - a numerical analysis on the role of flight flanks on conveying efficiency and thermal profiles单螺杆挤出机中熔体流动的简化——关于螺旋叶片对输送效率和热分布影响的数值分析
deleteInternational Polymer Processing
IF1.9
delete2026-02-01
delete0
PREAI
deleteMarschik, Christian; Rauwendaal, Chris; Haddadi, Bahram
delete分享
delete收藏
Effects of compatibilizers and blending methods on the properties of PC/ABS composites增容剂和共混方法对PC/ABS复合材料性能的影响
deleteInternational Polymer Processing
IF1.9
delete2026-01-01
delete0
PREAI
deleteMa, Xiaokun; Xu, Chao; Lu, Shulai; Liu, Zhijun; Wang, Liwei; Li, Xinyu; Zhou, Enzheng
delete分享
delete收藏
Low methylated pectin: structure, sources, functional properties, and emerging role in gut health and industrial applications低甲基化果胶：结构、来源、功能特性及其在肠道健康和工业应用中的新兴作用
deleteInternational Polymer Processing
IF1.9
delete2026-01-01
delete0
PREAI
deleteKrishna Murthy, C. S.; Salomi Suneetha, D. R.; Vijaya Nirmala, P.; Tingirikari, Jagan Mohan Rao
delete分享
delete收藏
Study on the performance of self-healing epoxy coatings prepared by the electrostatic spraying method静电喷涂法制备的自修复环氧涂层性能研究
deleteInternational Polymer Processing
IF1.9
delete2026-01-01
delete0
PREAI
deleteZhai, Zhe; Li, Feng; Yang, Haochi
delete分享
delete收藏
Fiber-matrix adhesion in glass fiber reinforced thermoplastic composite laminates and its effect on mechanical properties玻璃纤维增强热塑性复合材料层压板中的纤维-基体粘附及其对力学性能的影响
deleteInternational Polymer Processing
IF1.9
delete2026-01-01
delete0
PREAI
deleteMoritzer, Elmar; Brandes, Philipp; Wittler, Maurice; Claes, Leander; Wippermann, Mareen; Haag, Markus; Gries, Thomas; Henning, Bernd
delete分享
delete收藏
Melting of a polyethylene/polyamide blend in a co-rotating twin-screw extruder: experiments and preliminary modelling在共旋转双螺杆挤出机中聚乙烯/聚酰胺共混物的熔融：实验与初步建模
deleteInternational Polymer Processing
IF1.9
delete2025-12-01
delete0
PREAI
deleteMarchand, Emmanuel; Vergnes, Bruno
delete分享
delete收藏
Evaluation of print surface adhesion in FFF/FDMFFF/FDM打印表面附着力评估
deleteINTERNATIONAL POLYMER PROCESSING
IF1.9
delete2025-12-01
delete0
PREAI
deletePollak, Martin; Goryl, Karol
delete分享
delete收藏
Modeling and experimental investigation of parameter regularity and morphological control in CO2 laser machining PMMA microchannelsCO2激光加工PMMA微通道中参数规律性与形貌控制的建模与实验研究
deleteInternational Polymer Processing
IF1.9
delete2025-12-01
delete0
PREAI
deleteHu, Zengliang; Li, Minghai; Jia, Xiaohui
delete分享
delete收藏
Mechanical and physical characterization of PLA composites reinforced with okra fiber and silica nanoparticles聚乳酸（PLA）复合材料中okra纤维和二氧化硅纳米粒子的机械与物理表征
deleteINTERNATIONAL POLYMER PROCESSING
IF1.9
delete2025-12-01
delete1
PREAI
deleteMelvin Jones, J.; Raj, J. Bensam; Natarajan, N.; Nimal, R. J. Golden Renjith
delete分享
delete收藏
Enhancement of mode I/II fracture toughness in basalt/Kevlar hybrid composites via multiwall carbon nanotube integration
deleteINTERNATIONAL POLYMER PROCESSING
IF1.9
delete2025-11-25
delete1
PREAI
deleteBulut, Mehmet; Bozkurt, Omer Yavuz; Erklig, Ahmet; Abdo, Atban R.
delete分享
delete收藏
Combining Mag-Org fillers with epoxy-functionalised graphene to enhance the thermal stability of the polyvinyl chloride (PVC) based matrix while optimising its mechanical properties将Mag-Org填料与环氧功能化石墨烯结合，以提高基于聚氯乙烯（PVC）的基体的热稳定性，同时优化其机械性能
deleteINTERNATIONAL POLYMER PROCESSING
IF1.9
delete2025-11-25
delete1
PREAI
deleteMrah, Lahouari; Khiati, Zoulikha
delete分享
delete收藏
Origin of cloudiness in PET bottles modified with chain extenders for mechanical recyclingPET瓶中添加链扩展剂用于机械回收时混浊度的起源
deleteINTERNATIONAL POLYMER PROCESSING
IF1.9
delete2025-11-01
delete0
PREAI
deleteKanda, Toshihiko; Kobayashi, Miyu; Ito, Asae; Nitta, Koh-hei
delete分享
delete收藏