logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
J

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN

IF1.8
论文数33
被引数
期刊论文 33
发表时间
delete
Investigation of curing deformation and drilling effects in composite hat-shaped stiffened panels: Experimental and numerical analysis对复合材料帽形加筋板的固化变形和钻孔效应的研究：实验与数值分析
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-05-01
delete0
PREAI
deleteLiu, Chang; Chen, Baiyu; Sun, Cheng; Zhao, Yanqi; Shao, Chun; Zhang, Xianfeng
delete分享
delete收藏
Bending-tension fatigue in six-strand wire ropes六股钢丝绳的弯曲-拉伸疲劳
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-05-01
delete0
PREAI
deleteRidge, Isabel M. L.
delete分享
delete收藏
Ballistic response of natural rubber sheet against the hemispherical projectile: An experimental and numerical approach天然橡胶片对半球形弹头的弹道响应：实验与数值方法
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-05-01
delete1
PREAI
deleteSingh, Deepu Kumar; Tiwari, Gaurav
delete分享
delete收藏
Wear characteristics of spherical contact considering temperature and roughness based on an energy dissipation model基于能量耗散模型的考虑温度和粗糙度的球面接触磨损特性
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-05-01
delete0
PREAI
deleteWang, Xiaoyu; Ma, Junqi; Chen, Zhilong; Sun, Qiang; Ye, Liuzeng; Ye, Guiming
delete分享
delete收藏
Image-based deformation measurements of fusion divertor armour under high heat flux loading基于图像的聚变偏滤器甲板在高热流负载下的变形测量
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-05-01
delete0
deleteOAAI
deleteTayeb, Adel; Fletcher, Lloyd; Gorley, Mike; Harte, Allan; Hamelin, Cory
delete分享
delete收藏
Mixed fem for functionally graded and laminated HSDT composites resting on elastic foundation功能梯度与层合HSCT复合材料弹性地基上的混合有限元法
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-04-01
delete1
PREAI
deleteKanig, Dogan; Bab, Yonca; Kutlu, Akif
delete分享
delete收藏
Mechanical model of frost heave damage in lining of trapezoidal canals accounting for the influence of cracks梯形渠道衬砌冻胀损伤的力学模型及其裂缝影响分析
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-04-01
delete0
PREAI
deleteHe, Pengfei; Zhang, Wenhai; Kong, Xiangbing; Sun, Yajie; Sang, Yanfang; Shi, Ruige
delete分享
delete收藏
Stress-dependent calibration of a thermoelastic constitutive model for Cu-Zn-Al shape memory alloys应力依赖的Cu-Zn-Al形状记忆合金热弹性本构模型标定
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-03-01
delete0
PREAI
deleteZidane, Imade; Meddour, Belkacem
delete分享
delete收藏
Fillet radius influence for keyway subjected to fatigue: An investigation on an actual application键槽在疲劳作用下的倒角半径影响：实际应用调查
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-03-01
delete0
PREAI
deleteMascolo, Matteo; Rosso, Carlo
delete分享
delete收藏
Generalized analytical model for optimal design of hollow shaft-hub shrink-fit joints under torsional loading通用解析模型用于扭转载荷下空心轴毂过盈配合连接的最优设计
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-03-01
delete0
PREAI
deleteHussein, Ahmed W.; Kadhim, Mustafa M.; Mahdi, Mushrek A.
delete分享
delete收藏
Experimental and simulation research on connection strength of coiled tubing螺旋管的连接强度实验与仿真研究
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-02-01
delete0
PREAI
deleteYan, Jia; Fu, Yue; Cao, Longlong; Liang, Jian; Zhang, Hengchun; Fu, Biwei
delete分享
delete收藏
Residual stress distribution of a large component manufactured by AM-DED-Arc from high-strength weld filler material X90由高强度焊材X90制造的AM-DED-Arc大型构件的残余应力分布
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-02-01
delete0
PREAI
deleteDixneit, Jonny; Gibmeier, Jens; Kromm, Arne; Schubnell, Jan; Lang, Florian; Loebich, Florian; Carl, Eva-Regine; Ya, Wei
delete分享
delete收藏
A study on the optimisation of the fillet roller burnishing process for marine diesel engine crankshafts based on RSM基于响应曲面法对船用柴油机曲轴的圆角滚压工艺优化研究
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-02-01
delete0
PREAI
deleteChen, Jianzhi; Yang, Jiahao; Shang, Fanmin; Li, Guochao; Shi, Xiaona; Yao, Xu; Chen, Shanliang
delete分享
delete收藏
Beyond response surface methodology: High-fidelity prediction of residual stresses in Al6061 deep drawing using Artificial Neural Networks超越响应面法：利用人工神经网络高精度预测Al6061深冲残余应力
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteAskari, Ali; Kardan, Masoud
delete分享
delete收藏
An empirical correlation for stress intensity factors in thick-walled pressure vessels with semi-elliptical surface cracks using a meshfree e-RPIM approach基于无网格e-RPIM方法对带半椭圆表面裂纹厚壁压力容器的应力强度因子的经验相关性
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteShabani, Milad; Shahrooi, Shahram; Daneh-Dezfuli, Alireza; Ghafouri, Ashkan
delete分享
delete收藏
Direct identification of Poisson's ratio in conventional and auxetic materials using FEM-based modal inversion基于有限元模态反演对常规材料和负泊松比材料的泊松比直接识别
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteAbdullah, Mustafa; Prasad, Koushik V.; Karthikeyan, A.; Samantaray, Sikata; Gill, Harjot Singh; Purohit, Bilakshan; Samavatian, Majid; Samavatian, Vahid
delete分享
delete收藏
An analytical model for torque-tension relationship of bolted joints based on quadratic bearing pressure distribution and its validation基于二次承压压力分布的螺栓连接扭矩-预紧力关系分析模型及其验证
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteChen, Feng; Zhang, Suna; Zhang, Jianan; Liu, Jiaqing; Ke, Xianxin; Yuan, Fang; Wang, Cancan
delete分享
delete收藏
Overcoming metal rubber fatigue dispersion: A feature-enhanced temporal convolutional networks approach克服金属橡胶疲劳分散：一种特征增强的时序卷积网络方法
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteChen, Yuming; Lin, Jianfeng; Huang, Zihao; Yang, Kai; Zhou, Chunhui; Ren, Zhiying
delete分享
delete收藏
Crack initiation and propagation in DP1000 steel studied by in-situ SEM bending test with digital image correlation and finite element analysisDP1000钢的裂纹萌生与扩展研究：基于原位SEM弯曲试验、数字图像相关和有限元分析
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete0
PREAI
deleteAlsharif, Asim
delete分享
delete收藏
Crack growth analysis of graphene nanoplatelet reinforced polymer composites using XFEM使用XFEM的石墨烯纳米片增强聚合物复合材料的裂纹扩展分析
deleteJOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
IF1.8
delete2026-01-01
delete1
PREAI
deleteJee, Mayank; Sahoo, Rosalin
delete分享
delete收藏