logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
J

Journal of Alloys and Metallurgical Systems

IF
论文数29
被引数1
期刊论文 29
发表时间
delete
Additively manufactured carbide and nitride doped Co22.2Cr22.2Ni22.2Cu22.2Nb11.2 high-entropy alloy for surface engineering application增材制造的碳化物和氮化物掺杂的Co22.2Cr22.2Ni22.2Cu22.2Nb11.2高熵合金及其在表面工程中的应用
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-06-01
delete0
deleteOAAI
deleteAlabi, Ayo Samuel; Popoola, Abimbola Patricia Idowu; Popoola, Olawale Mohammed; Mathe, Ntombi Ruth
delete分享
delete收藏
Transforming the modelling of nuclear structural materials: A critical review of machine learning approaches变革核结构材料的建模：机器学习方法综述
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-06-01
delete0
deleteOAAI
deleteTasdemir, Burcu; Larrosa, Nicolas; Shanthraj, Pratheek; Mostafavi, Mahmoud; Barton, David
delete分享
delete收藏
Microstructural and tribological evaluation of LM26 aluminum hybrid composites reinforced with almandine garnet and MoS2LM26铝合金复合材料的微观结构与摩擦学性能评价：以石榴石和二硫化钼为增强体
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-05-01
delete0
deleteOAAI
deleteLandge, Nilesh; Adhaye, Amit; Abhang, Laxman
delete分享
delete收藏
Quenched and auto-tempered high-strength reinforcing steel rebars for corrosion-sensitive areas淬火和自回火的高强度钢筋，用于腐蚀敏感区域
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-05-01
delete1
deleteOAAI
deleteIslam, M. A.; Dipon, Md. Nazmul Ahsan; Tarif, Md.
delete分享
delete收藏
Hot corrosion behavior of La2Ce2O7 thermal barrier coatings under high-temperature molten salt environments高温熔盐环境下La2Ce2O7热障涂层的抗热腐蚀行为
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-03-01
delete0
PREAI
deleteRamesh, Banothu; Babu, S. P. Kumaresh
delete分享
delete收藏
Processing and characterization of in-situ intermetallic and ceramic particles reinforced magnesium matrix composites原位金属间化合物和陶瓷颗粒增强镁基复合材料的制备与表征
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-03-01
delete0
PREAI
deleteShivalingappa, D.; Harish; Kumar, R. Suresh; Raghavendra, N.; Shekar, K.; Venkatesh, M. K.; Prasad, C. Durga; Dileep, B. P.; Smitha, B. S.; Prabhu, Subramanya R.
delete分享
delete收藏
Structure and properties of AlCoFeCuMox high entropy alloy coatings prepared by laser cladding and applications on drones for aerospace innovation competitions激光熔覆制备的AlCoFeCuMox高熵合金涂层的结构与性能及其在航空航天创新竞赛无人机上的应用
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-03-01
delete0
PREAI
deleteLiu, Chunge; Qiu, Xingwu; Wang, Zhansheng; Peng, Jia; Liu, Zhongwei; Qiu, Chenjia; Meng, Chao; Ren, Xin
delete分享
delete收藏
Laser shock processing: An effective post-treatment process to enhance mechanical performances of laser additive manufactured parts激光冲击处理：一种提高激光增材制造零件力学性能的有效后处理工艺
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-02-01
delete0
deleteOAAI
deleteHe, Cheng; Xu, Youze; Cao, Xiaodie; Zhao, Jibin; Li, Lihong; Zhou, Bingqi; Mao, Zhongfa; Wu, Jiajun; Chen, Xinhui
delete分享
delete收藏
Effect of Sn addition on the microstructure, mechanical properties, and corrosion behaviour of AZ31 magnesium alloySn添加对AZ31镁合金微观结构、力学性能和腐蚀行为的影响
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-02-01
delete0
deleteOAAI
deleteIslam, Md. Rakibul; Rahi, Istiak Mahmood; Hossain, Md. Noushad; Rashed, H. M. M. A.
delete分享
delete收藏
Allotropic α→β transformation in diffusion-graded commercial-purity Ti-Zr multilayers: DSC overlapping peak deconvolution and kissinger kinetic analysis商业纯度Ti-Zr多层膜中的同素异形α→β相变：差示扫描量热法重叠峰解卷积和Kissinger动力学分析
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-02-01
delete0
deleteOAAI
deleteJawabreh, Anas; Barkoczy, Peter
delete分享
delete收藏
Influence of Er addition and thermomechanical processing on the in vitro corrosion and cytocompatibility of Mg-Zn-Y alloysEr添加和热机械处理对Mg-Zn-Y合金体外腐蚀和细胞相容性的影响
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-01-01
delete0
deleteOAAI
deletePromy, Raisa Tahsin; Nafiz, Md. Walid Ahmed; Amin, Syed Muhammad Al; Roy, Chanchal Kumar; Gulshan, Fahmida
delete分享
delete收藏
High-temperature cyclic oxidation and microstructural behavior of CoMoCrSi-based composite coatings with Al2O3 and YSZ on T91 steel高温循环氧化及含Al2O3和YSZ的CoMoCrSi基复合涂层在T91钢上的微观结构行为
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-01-01
delete1
deleteOAAI
deleteShetty, Rakshith Kumar; Hebbale, Ajit M.; Chandramouli, T. V.; Ramesh, M. R.; Petru, Jana
delete分享
delete收藏
The effect of heat treatment temperature on the wear resistance of 42CrMo steel hardfacing with Fe-Cr-C alloy热处理温度对Fe-Cr-C合金堆焊42CrMo钢耐磨性的影响
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2026-01-01
delete0
deleteOAAI
deleteHao, Junke; Que, Huiying
delete分享
delete收藏
Surface treatment of 7005 aluminum alloy with anodization technique for aluminum air battery application采用阳极氧化技术对7005铝合金进行表面处理，用于铝空气电池应用
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-12-01
delete1
deleteOAAI
deleteSitanggang, Ruly Bayu; Supriyono; Kartikowati, Christina Wahyu; Poerwadi, Bambang; Fauziyah, Mar'atul; Puspitasari, Diah Agustina
delete分享
delete收藏
An attempt toward machine learning-driven optimization of manufacturing processes for metal-supported solid oxide fuel cells using nickel and iron oxides as raw support materials基于机器学习驱动的金属支撑固体氧化物燃料电池制造工艺优化研究，使用镍和铁氧化物作为原始支撑材料
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-12-01
delete0
PREAI
deleteSumi, Hirofumi; Momai, Mizuki; Yamaguchi, Yuki
delete分享
delete收藏
A comprehensive comparison of dynamic strain localisation and mechanical behaviour in traditional and additively manufactured Ti6Al4V传统与增材制造Ti6Al4V的动态应变局部化和力学行为综合比较
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-12-01
delete0
deleteOAAI
deleteGour, Govind; Pellegrino, Antonio
delete分享
delete收藏
Effect of process parameters on bead geometry and microstructure of the stainless steel fabricated by wire arc additive manufacturing丝材电弧增材制造的不锈钢的工艺参数对焊道几何形状和微观结构的影响
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-12-01
delete0
deleteOAAI
deleteQin, Huifeng; Zhu, Wensha; Zhang, Huajun
delete分享
delete收藏
Resource-efficient fracture-mechanical characterization of short cracks in additively manufactured titanium aluminides
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-11-01
delete0
deleteOAAI
deleteKloos, Niklas; Teschke, Mirko; Mrzljak, Selim; Koch, Alexander; Walther, Frank
delete分享
delete收藏
Study of the use of aluminium-containing waste in ferrosilicon production铝含量废料在硅铁生产中的使用研究
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-11-01
delete0
deleteOAAI
deleteZhunusov, Ablay; Zhunusova, Aygul; Kenzhebekova, Anar; Bakirov, Altynsary; Tyulyubayev, Renat
delete分享
delete收藏
Microstructural and elemental evolution of directed energy deposited inconel 825 under hot corrosion热腐蚀条件下定向能量沉积Inconel 825的微观结构与元素演变
deleteJournal of Alloys and Metallurgical Systems
IF0
delete2025-11-01
delete0
deleteOAAI
deleteArun, Ilangovan; Marotrao, Sarange Shreepad; Sharma, Vipin; Karthikeyan, Sivakumar; Hussain, Zakir; Veeramanikandan, P.; Venkatesulu, M.; Rajendiran, M.; Senthil, T. S.
delete分享
delete收藏