logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
J

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME

IF1.9
论文数33
被引数
期刊论文 33
发表时间
delete
Corrosion-Wear Behavior of Selective Laser Melted Inconel 718 Alloy Before and After Solution Heat Treatment and Double Aging选择性激光熔覆INCONEL 718合金在固溶热处理和双重时效前后的腐蚀-磨损行为
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-07-01
delete0
PREAI
deleteHo, Kuo-Chang; Xu, Peng-Li; Sheu, Hung-Hua; Liao, Kang-Yu; Lee, Hung-Bin; Li, Wen-ken
delete分享
delete收藏
Effect of Porosity on the Wear Performance of Ti-18Nb-9Cu Alloy多孔性对Ti-18Nb-9Cu合金耐磨性能的影响
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteFaaik, Muhamad Saad; Anaee, Rana Afif; Demirtas, Huseyin
delete分享
delete收藏
Deformation Behavior Study of Single Crystal BaPt2 Compound Using Parameterized Embedded-Atom Method Potential: Part 2-Ratcheting Characteristics单晶BaPt2化合物在参数化嵌入原子方法势下的变形行为研究：第二部分-棘轮特性
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteMukhopadhyay, Sankhasubhra; Dinda, Soumitra Kumar; Singh, Shailesh Kumar; Ghosh, Manojit; Pal, Snehanshu
delete分享
delete收藏
Integrating Machine Learning to Investigate the Effect of Process Parameters on the Toughness of Additively Manufacturing 316L Stainless Steel将机器学习应用于研究增材制造316L不锈钢工艺参数对其韧性的影响
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteBhuiyan, Md Zisanul Haque; Khanafer, Khalil; Kokash, Hussein
delete分享
delete收藏
Investigations on Formability of a SS/AA Clad Sheet at Elevated Temperatures高温下SS/AA复合板材的成形性研究
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deletePrasad, Bijendra; Gautam, Vijay
delete分享
delete收藏
Tailoring Microstructure and Performance of CMT-WAAM Deposited Al 4047 Alloy Wall Through Interlayer Addition of Rare Earth La2O3 Nanoparticles通过稀土La₂O₃纳米颗粒层间添加调控CMT-WAAM沉积的Al 4047合金壁的微观结构与性能
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete1
PREAI
deleteSingh, Vibhu; Kesarwani, Soni; Murtaza, Qasim
delete分享
delete收藏
High-Temperature Hardness and Its Relationship With Plastic Yield Properties of Short Carbon-Fiber-Reinforced Polyphenylene Sulfide-Matrix Composite With Graphite Flakes and PTFE Particles高温硬度和其与短碳纤维增强聚苯硫醚基复合材料（含石墨片和PTFE颗粒）的塑性屈服性能的关系
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteMendez Santos, Salvador; Wang, Su Su
delete分享
delete收藏
Mechanics of Crack and Specimen Size Effects on Fracture Toughness Determined Using Compact Tension Specimens: Analysis by Net-Section Stress Modeling裂纹和试样尺寸效应对断裂韧性影响机制研究：基于净截面应力模型的分析
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteRavi Chandran, K. S.
delete分享
delete收藏
Surface Characterization and Comparison of AA2024 Subjected to Multiple Severe Plastic Deformation TechniquesAA2024经多种剧烈塑性变形技术处理后的表面表征与比较
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteSatyanarayana, M. V. N. V.; Arunachalam, Krishna Prakash; Lamilla, Pedro Naranjo; Chiranjeevi, Poondla; Janaki Venkatesh, Durga; Suresh, Bade Venkata; Govind, Nandipati
delete分享
delete收藏
Effect of Frequency and Amplitude Parameters on the Microstructure and Strength Characteristics of T-Joint Composite Materials for Naval Ship and Aerospace Application频率和振幅参数对用于舰船和航空航天应用的T型接头复合材料微观结构和强度特性的影响
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteYadav, Sachin Sopan; Kumar, S. D.; Hussain, M. Zahir; Pawar, Ramkisan S.; Chellathurai, Samuvel
delete分享
delete收藏
Deformation Behavior Study of Single Crystal BaPt2 Compound Using Parameterized Embedded-Atom Method Potential-Part 1: Tensile and Creep Characteristics采用参数化嵌入原子法势研究单晶BaPt2化合物的变形行为—第一部分：拉伸和蠕变特性
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteMukhopadhyay, Sankhasubhra; Dinda, Soumitra Kumar; Singh, Shailesh Kumar; Ghosh, Manojit; Pal, Snehanshu
delete分享
delete收藏
Revisiting the Dexterity of Birnbaum's Explanation of Hydrogen-Induced Hardening or Softening in Macroscopic Stress-Strain Tensile Tests重新审视Birnbaum对宏观拉伸试验中氢致硬化或软化的解释的巧妙性
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteVijayvargia, Kshitij; Dadfarnia, Mohsen; Sofronis, Petros
delete分享
delete收藏
Influence of Insoluble Elements Addition on Microstructural Stability and Strengthening Mechanisms of Spark Plasma-Sintered Al-Cu Alloys添加不溶元素对火花等离子烧结Al-Cu合金微观结构稳定性和强化机制的影响
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteLande, Vishwanath; Dasharath, S. M.; Babu, S. M. Jagadeesh
delete分享
delete收藏
Development of Agro-Residue Polymer Composites With Enhanced Mechanical Strength and Extended Service Life开发具有增强机械强度和延长使用寿命的农业废弃物聚合物复合材料
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-04-01
delete0
PREAI
deleteMishra, Deepak Kumar; Kumar, Sushant; Chandra, Suresh; Chauhan, Neelesh; Kumar, Vivak; Singh, Jaivir; Sharma, Vineet Kumar; Singh, Nishant
delete分享
delete收藏
Dependence of Localized Necking Behavior on the Specimen Shapes in Tensile Testing of Ultra-Thin Copper Alloy Sheet在超薄铜合金板拉伸测试中，局部颈缩行为对试样形状的依赖性
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-03-01
delete0
PREAI
deleteUeshima, Nobufumi; Oya, Tetsuo; Oikawa, Katsunari; Ito, Koichi; Hyodo, Hiroshi; Yorifuji, Hiroshi
delete分享
delete收藏
Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates选择层合板配置以训练DeepONet，用于预测纤维增强塑料层合板中增量钻孔校准常数
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-03-01
delete0
PREAI
deleteLee, Seung-Woo; Smit, Teubes C.; Kim, Do-Nyun; Reid, Robert G.
delete分享
delete收藏
Mechanical Properties and Interfacial Tribological Mechanisms of Silver-Doped 316L Stainless Steel Under Cryogenic Conditions低温条件下银掺杂316L不锈钢的力学性能及界面摩擦学机制
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-03-01
delete0
PREAI
deleteXu, Jimin; He, Longgui; Cheng, Shuo; Zhang, Cuiping
delete分享
delete收藏
Corrosion Behavior of Additively Manufactured H13 Tool Steel in Salt Solution (3.5 wt% NaCl)增材制造H13工具钢在盐溶液(3.5 wt% NaCl)中的腐蚀行为
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-01-01
delete0
PREAI
deleteByiringiro, Justin; Ech-chihbi, Elhachmia; Salim, Rajae; Chaanaoui, Meriem; Hammouti, Belkheir
delete分享
delete收藏
Investigation of Zinc-Doped Titanium Nanocomposites and Their Photocatalysis Effectiveness锌掺杂二氧化钛纳米复合材料的制备及其光催化效果研究
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-01-01
delete0
PREAI
deleteFadhali, Mohammed M.; Dhameri, Mariam A.; Sharma, Mukul; Masmali, Nada A.
delete分享
delete收藏
Effect of Inhomogeneous Mechanical Properties on Local Stress and Crack Growth Path in Friction-Welded Drill Pipe Joints不均匀力学性能对摩擦焊钻杆接头局部应力和裂纹扩展路径的影响
deleteJOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
IF1.9
delete2026-01-01
delete0
PREAI
deleteZhao, Kuan; Yang, Pengbo; Zhang, Jianlong; Wang, Zheng
delete分享
delete收藏