logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
M

Metallurgical Research & Technology

IF1.1
论文数100
被引数
期刊论文 100
发表时间
delete
Surface morphology and structural evolution of coke under hydrogen-rich conditions and dissolution mechanism based on active sites富氢条件下焦炭的表面形貌和结构演变及其基于活性位点的溶解机制
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteDeng, Yong; Long, Yue; Zhang, Yuzhu; Huang, Zhenghua; Yao, Kuo; Bao, Jiwei
delete分享
delete收藏
Effect of preheating temperature on the jet characteristics of a five-hole oxygen lance in a high-temperature environment高温环境下预热温度对五孔氧枪喷射特性的影响
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteYuan, Jiandu; Liu, Wenjuan; Deng, Shaoxuan; Feng, Lianghua; Liu, Kun
delete分享
delete收藏
Evolution and control of MnS inclusions in non-quenched steel during hot processing非淬火钢热加工过程中MnS夹杂物的演变与控制
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteSun, Huakang; Li, Yanhua; Li, Pengju; Wang, Shuhuan; Lu, Boxun; Li, Chenxiao; Xue, Yuekai
delete分享
delete收藏
Precipitation and evolution of carbides in Fe-Cr-Al alloys under heat treatmentsFe-Cr-Al合金热处理过程中碳化物的沉淀与演化
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteMeng, Han; Tao, Ke; Cao, Lei; Li, Gang; Wang, Guocheng
delete分享
delete收藏
Prediction of manganese element recovery rate in the ladle section of a converter based on a hybrid integrated deep neural network基于混合集成深度神经网络的转炉钢包段锰元素回收率预测
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteZhao, DengLu; Li, Ailian; Xie, ShaoFeng; Meng, Wei; Zhang, YiFan
delete分享
delete收藏
Experimental study on efficient dephosphorization behavior in electric arc furnace smelting with high scrap steel ratio高废钢比电弧炉炼钢中高效脱磷行为实验研究
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteShi, Yatong; Feng, Menglong; Hu, Yanbin; He, Sai; Lin, Lu
delete分享
delete收藏
Simulation study on molten steel flow behavior in BB5 super-sized beam blank moldBB5超大型板坯连铸结晶器内钢液流动行为的模拟研究
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-21
delete0
PREAI
deleteYang, Xin; Lv, Ming; Gao, Qi; Sun, Xiong-bo; Wang, Wen-xue; Hu, Hao
delete分享
delete收藏
The interface microstructure evolution and mechanical properties of S32168/Q345R composite plate under different rolling parametersS32168/Q345R复合板在不同轧制参数下的界面微观结构演变及力学性能
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-20
delete0
PREAI
deleteYang, Ruiqing; Jiang, Lianyun; Fang, Jiahui; Zhang, Yu; Yang, Shuguo
delete分享
delete收藏
Microstructure and mechanical properties of general structural steel parts manufactured by submerged arc - wire arc additive manufacturing (SA-WAAM)水下电弧-丝材电弧增材制造（SA-WAAM）生产的通用结构钢零件的微观结构及力学性能
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-20
delete0
PREAI
deleteTimucin, Filiz; Cevik, Nihat; Kaya, Kubra; Gul, Canser; Comez, Nilay; Durmus, Hulya
delete分享
delete收藏
Features of blast furnace smelting technology with pulverized coal injection from different coal mixtures under conditions of variable coke quality不同煤种混合喷吹条件下高炉炼铁技术特征及焦炭质量变化影响
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-20
delete1
PREAI
deleteSemenov, Yurii; Horupakha, Viktor; Khudyakov, Oleksandr; Vashchenko, Serhii; Shumelchyk, Ievhen
delete分享
delete收藏
Investigation of mechanical properties and microstructures on both-side spray quenching methodology对双面喷雾淬火工艺的力学性能和微观结构的研究
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-13
delete0
PREAI
deleteKumar, Kollati Prudhvi Ravi; Dixit, Girija Shankar; Mohanty, Samarendu; Mohapatra, Sowhm Swain; Sahoo, Abanti; Mohapatra, Soumya Sanjeeb
delete分享
delete收藏
Effect of scanning strategy on stress of selective laser melting Mg-Y-Sm-Zn-Zr Alloy选择性激光熔化Mg-Y-Sm-Zn-Zr合金的扫描策略对应力的影响
deleteMetallurgical Research & Technology
IF1.1
delete2026-05-13
delete0
PREAI
deleteLiu, Yafei; Wang, Wenli; Xu, Rongrong; Song, Xiaoxia; Wang, Kongkong
delete分享
delete收藏
Mathematical modeling on the fluid flow during RH degassing process (vol 114, 510, 2017)RH脱气过程中流体流动的数学建模 (vol 114, 510, 2017)
deleteMetallurgical Research & Technology
IF1.1
delete2026-04-17
delete0
PREAI
deleteLing, Haitao; Zhang, Lifeng; Liu, Chang
delete分享
delete收藏
Y-O-S and Ce-O-S equilibria in liquid copper液态铜中的Y-O-S和Ce-O-S平衡
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteLei, Xuan-Wei; Luo, Di-Qiang; Dan, Tang-Ping; Lai, Chao-Bin
delete分享
delete收藏
Fabrication of titanium-steel joints with a copper powder interlayer by electro-assisted hot pressing通过电辅助热压和铜粉中间层制备钛-钢接头
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteSong, Cheng-Min; Peng, Chun-Lin; Shang, De-Li; Liao, Xiang-Wei; Zhang, Guo-Hua; Chou, Kuo-Chih
delete分享
delete收藏
A study on flatness defect control with edge wave during cold rolling process of SUS430 stainless steel by sendzimir mill在森吉米尔轧机冷轧SUS430不锈钢过程中边缘浪形缺陷的控制研究
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteWei, Boyu; Wang, Zhengzhong; Song, Guangyi; Kong, Ning; Li, Jinming; Zhang, Jie; Liang, Pei; Song, Yuwei; Sun, Wenquan
delete分享
delete收藏
Numerical analysis of the influence of electrode configurations on multiphysics fields in electroslag remelting process电渣重熔过程中电极配置对多物理场影响的数值分析
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteLyu, Naibing; Hao, Jianqiao; Li, Jing; Wang, Xiaochen; Xu, Shixin
delete分享
delete收藏
Research on electroslag system for ultra-supercritical FB2 rotor steel超超临界FB2转子钢的电渣系统研究
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteLin, Tengchang; Wang, Ning; Li, Longfei; Yang, Yong
delete分享
delete收藏
High entropy alloys: a brief overview on the synthesis routes and influence on process parameters高熵合金：合成路线与过程参数影响的简要概述
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteSingh Negi, Pratyush; Udhayakumar, Sornamala; Jayaprakasam, Sudha
delete分享
delete收藏
Enhancing machining performance of AlSi10Mg composites using EDM: a Taguchi-RSM-random forest approach采用电火花加工技术提升AlSi10Mg复合材料的加工性能：一种田口-RSM-随机森林方法
deleteMetallurgical Research & Technology
IF1.1
delete2026-03-27
delete0
PREAI
deleteSelvarajan, Lakshmanan; Arun, Chandrasekaran; Borah, Jyotisman
delete分享
delete收藏