logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
arrow
返回期刊详情
J

Journal of Turbomachinery-Transactions of the ASME

IF3.1
论文数133
被引数11113
期刊论文 133
发表时间
delete
A Corner Separation Sensing Method Based on Shallow Neural Networks in Compressor Cascade基于浅层神经网络的压缩机叶栅角分离检测方法
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteChen, Shuaitong; Yang, Pengcheng; Chen, Shaowen
delete分享
delete收藏
The Design of Aspirated Stators for Compressor Bleed压气机引气抽吸式静子叶片的设计
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
deleteOAAI
deleteWaldren, Jonathan J.; Seki, Ryosuke; Grimshaw, Sam D.; Pullan, Graham
delete分享
delete收藏
Investigation of Shear Layer Induced Pressure Fluctuations in a Linear Compressor Cascade线性压气机叶栅中剪切层诱导的压力波动研究
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteJasmund, Christoph; Lange, Martin; Mailach, Ronald
delete分享
delete收藏
Elevated Mainstream Mach Number Effects on Shaped Gas Turbine Film Cooling Holes主流马赫数增大的影响对成型燃气轮机气膜冷却孔
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete1
PREAI
deleteFurgeson, Michael T.; Flachs, Elise M.; Bogard, David G.
delete分享
delete收藏
Multiscale Data-Driven RANS Closure for Trailing Edge Cutback Film Cooling Flows多尺度数据驱动的大涡模拟封闭方法在尾缘切角薄膜冷却流场中的应用
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete1
PREAI
deleteHe, Xiao; Montomoli, Francesco; Michelassi, Vittorio; Panizza, Andrea; Pulga, Leonardo
delete分享
delete收藏
Design and Fabrication of a Thermally Optimized Gas Turbine Nozzle热优化燃气轮机喷嘴的设计与制造
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete1
PREAI
deleteFlachs, Elise M.; Bogard, David G.
delete分享
delete收藏
Synchronization of the Unsteady Pressure Field: An Explanation for Amplified Ingress非定常压力场的同步：对增强流入的解释
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
deleteOAAI
deleteVella, Simon; Scobie, James A.; Lock, Gary D.; Sangan, Carl M.; Tang, Hui
delete分享
delete收藏
Aerothermal-Structural Optimization of a High-Pressure Turbine Rotor With Robustness Evaluation to in-Service Deterioration高压涡轮转子气动热-结构优化及其对服役劣化的鲁棒性评估
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteCarta, Mario; Putzu, Roberto; Ghisu, Tiziano; Shahpar, Shahrokh
delete分享
delete收藏
Direct Numerical Simulations and Boundary Layer Analysis in Compressor Blade Channel at Various Reynolds Numbers压缩机叶片通道内不同雷诺数下的直接数值模拟与边界层分析
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteLiu, Yang; Zhou, Lei; Wang, Duo; Zhang, Xiang; Chen, Xiaolan; Shao, Weidong; Xu, Hongyi
delete分享
delete收藏
Reducing Low-Pressure Turbine Shroud Leakage Loss by Optimizing Leakage-Mainstream Interaction通过优化泄漏-主流相互作用来减少低压涡轮机匣泄漏损失
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
deleteOAAI
deleteCamarero Pueyo, Josue-Inocente; Helmsen, Eike; Oettinger, Marcel; Klingl, Stefan; Junghans, Haris; Palkus, Kacper; Wein, Lars
delete分享
delete收藏
Setting Robust Manufacturing Tolerances for Turbine Trailing Edge Film Cooling为涡轮尾缘薄膜冷却设置稳健的制造公差
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deletevon Mueller, Tassilo; Ireland, Peter; Jackson, Dougal
delete分享
delete收藏
Stability Enhancement With Controllable Speed Casing for Transonic Compressor Rotor in Different Speed Conditions不同转速条件下带可控速度外壳的跨声速压缩机转子的稳定性提升
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteZhao, Jiayi; Wu, Wanyang; Zhong, Jingjun
delete分享
delete收藏
Heat Transfer Measurements in a Turbine Center Frame at Realistic Mach Number-Part II: Influence of Combustor Hot Streaks真实马赫数下涡轮中心框架的热传递测量-第二部分：燃烧室热条纹的影响
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
deleteOAAI
deleteBadzek, Ena; Jagerhofer, Patrick R.; Bulovic, Petar; Patinios, Marios; Gottlich, Emil
delete分享
delete收藏
Investigation of Rotating Stall in Vaneless Diffuser of Single-Stage Centrifugal Blower Using Wall-Resolved Large Eddy Simulation单级离心鼓风机无叶扩压器中旋转失速的壁面解析大涡模拟研究
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteTsukamoto, Kazuhiro; Kato, Chisachi
delete分享
delete收藏
Wind Tunnel Testing at TRL4 of EBC-Coated SIC/SIC Nozzle Guide Vanes for High-Pressure Turbines With Trailing Edge CoolingEBC涂层SiC/SiC喷嘴导叶在尾缘冷却条件下用于高压涡轮的风洞测试TRL4
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deletePetersen, Anna; Dimond, Benjamin; Sohngen, Anna-Samira; Suss, Fabia; Ebach-Stahl, Andrea; Naraparaju, Ravisankar; Hilfer, Michael; Brakmann, Robin G.
delete分享
delete收藏
Heat Transfer Measurements in a Turbine Center Frame at Realistic Mach Number-Part I: Baseline Study真实马赫数下涡轮中心框架的热传递测量：第一部分：基准研究
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
deleteOAAI
deleteJagerhofer, Patrick R.; Badzek, Ena; Bulovic, Petar; Patinios, Marios; Gottlich, Emil
delete分享
delete收藏
Study on Damping of Nozzleless Radial Turbine and Its Role in Forced Response无喷嘴径向涡轮的阻尼及其在强迫响应中的作用研究
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete0
PREAI
deleteLu, Zhaokai; Yang, Mingyang; Sato, Wataru; Kuwata, Teppei
delete分享
delete收藏
Improved Eigenspace Perturbation Framework for RANS Structural Uncertainty Quantification in Transonic Compressor Flows改进的特征空间扰动框架用于跨声速压气机流场雷诺平均纳维-斯托克斯结构不确定性量化
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete2
PREAI
deleteWang, Zhiheng; Wang, Zhenfei; Huang, Zhu; Xi, Guang
delete分享
delete收藏
Performance and Evaluation of a Thermally Optimized Gas Turbine Nozzle热优化燃气轮机喷嘴的性能与评估
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete1
PREAI
deleteFlachs, Elise M.; Bogard, David G.
delete分享
delete收藏
Film-Cooling Effectiveness of Diffusion Slot Hole on Turbine Blade Tip With a Leading Edge Open Squealer扩散斜孔对带前缘开放式窃气腔涡轮叶片尖部的气膜冷却效果
deleteJournal of Turbomachinery-Transactions of the ASME
IF3.1
delete2026-05-01
delete2
PREAI
deleteMa, Xiao-Hui; Hu, Jia-Jun; An, Bai-Tao
delete分享
delete收藏