logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mtu Aero Engines

学者数105
论文数75
被引数0
关联论文 (75)
发表时间
delete
Miniature Mechanical Testing to Infer Damage fromAccidental and Complex Thermal Exposure for Single CrystalSuperalloys微型机械测试以推断单晶高温合金在意外和复杂热暴露下的损伤
errMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF2.5
err2026-05-01
err0
PREAI
errTang, Yuanbo T.; Schwalbe, Caspar; Brunthaler, Julia; Reed, Roger C.; Utada, Satoshi
err分享
err收藏
Reducing Low-Pressure Turbine Shroud Leakage Loss by Optimizing Leakage-Mainstream Interaction通过优化泄漏-主流相互作用来减少低压涡轮机匣泄漏损失
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-05-01
err0
PREAI
errCamarero Pueyo, Josue-Inocente; Helmsen, Eike; Oettinger, Marcel; Klingl, Stefan; Junghans, Haris; Palkus, Kacper; Wein, Lars
err分享
err收藏
A geometric characterisation of PH-cubics via the focus of the cusp curve通过尖点曲线的焦点对PH三次曲线的几何特征化
errComputer Aided Geometric Design
IF1.7
err2026-04-01
err0
PREAI
errMokris, Dominik
err分享
err收藏
Numerical Demonstration of NO Emissions Reduction by Steam Injection in the Aero Engine Combustor IAE V2500通过蒸汽喷射减少IAE V2500航空发动机燃烧室NO排放的数值演示
errJournal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF2.1
err2026-03-01
err0
PREAI
errHiestermann, Marian; Haeringer, Matthias; Desor, Marcel; Niebler, Korbinian; Berger, Lukas
err分享
err收藏
A Test Facility for the Experimental Investigation of Labyrinth Seal Flutter and Early-Stage Validation of Prediction Techniques迷宫密封颤振的实验研究和预测技术早期验证测试装置
errJournal of Turbomachinery-Transactions of the ASME
IF3.1
err2026-01-01
err0
PREAI
errMace, Tom; Schwingshackl, Christoph; Korte, Detlef; Greco, Michele; Corral, Roque; Bermejo Jimenez, Oscar; Gallego-Garrido, Jon
err分享
err收藏
Intake distortions and their impact on compressor stability: an overview and evaluation of current approaches
errCEAS Aeronautical Journal
IF0
err2025-10-01
err0
PREAI
errHaber, Amelie; Kozulovic, Dragan
err分享
err收藏
Deep learning meta architecture to detect spatially coherent coarse grain regions in ultrasonic data
errNDT & E INTERNATIONAL
IF4.5
err2025-07-01
err0
PREAI
errElischberger, Frederik; Jiang, Xiaoyi
err分享
err收藏
The Black Metal Tribometer: High-resolution measurement of normal load-indentation curves and partial slip hysteresis cycles黑色金属摩擦计: 正常载荷压痕曲线和部分滑移滞后循环的高分辨率测量
errTRIBOLOGY INTERNATIONAL
IF6.9
err2025-06-01
err0
errOAAI
errFochler, Daniel; Schwarz, Stefan; Kohlmann, Lukas; Krack, Malte
err分享
err收藏
A Monte-Carlo approach for crack initiation modeling of cast superalloys informed by crystal plasticity
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2025-01-01
err0
PREAI
errSayer, Niklas; Fried, Markus; Muenstermann, Sebastian
err分享
err收藏
Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines
errLUBRICANTS
IF2.9
err2024-07-13
err0
errOAAI
errGolek, Markus; Gleichner, Jakob; Chatzisavvas, Ioannis; Kohlmann, Lukas; Schmidt, Marcus; Reinke, Peter; Rienacker, Adrian
err分享
err收藏
Influence Factors of Platinum Dissolution in Proton Exchange Membrane Fuel Cells: A Sensitivity Study
errJOURNAL OF THE ELECTROCHEMICAL SOCIETY
IF3.3
err2024-05-24
err3
errOAAI
errStiegeler, Julian; Mittermeier, Thomas; Tsikonis, Leonidas; Lehre, Thilo; Vierrath, Severin
err分享
err收藏
Numerical prediction of primary dendrite arm spacing (PDAS), properties of the mushy zone, and freckle risk for various multicomponent Ni-base superalloys using the 3D-phase-field method
errCOMPUTATIONAL MATERIALS SCIENCE
IF3.3
err2024-03-01
err3
errOAAI
errBoettger, B.; Seiz, A.; Sowa, R.; Berger, R.; Apel, M.
err分享
err收藏
A comparison of smooth basis constructions for isogeometric analysis
errCOMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
IF7.3
err2024-02-01
err4
errOAAI
errVerhelst, H. M.; Weinmueller, P.; Mantzaflaris, A.; Takacs, T.; Toshniwal, D.
err分享
err收藏
Microstructure and mechanical properties of additively manufactured γ-TiAl with dual microstructure
errINTERMETALLICS
IF4.8
err2023-10-01
err11
PREAI
errKnorlein, Julia; Franke, Martin Michael; Schloffer, Martin; Berger, Timo; Korner, Carolin
err分享
err收藏
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide
errINTERMETALLICS
IF4.8
err2023-05-01
err7
errOAAI
errZeiler, Stefan; Lintner, Arthur; Schloffer, Martin; Pippan, Reinhard; Hohenwarter, Anton
err分享
err收藏
Interdisciplinary design optimization of compressor blades combining low- and high-fidelity models
errSTRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
IF4
err2023-03-16
err3
errOAAI
errPretsch, Lisa; Arsenyev, Ilya; Czech, Catharina; Duddeck, Fabian
err分享
err收藏
Prediction of the crack growth propagation direction in non-proportional mixed-mode missions
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-01-01
err10
PREAI
errAmato, Daniele; Mayrhofer, Lukas; Robl, Christian; Dhondt, Guido; Citarella, Roberto
err分享
err收藏
Generalized and wavelength-dependent temperature calibration function for multipoint regenerated fiber Bragg grating sensors
errOPTICS EXPRESS
IF3.3
err2022-11-23
err2
errOAAI
errBuchfellner, Fabian; Stadler, Andrea; Bian, Qiang; Hennesen, Maximilian; Zeisberger, Andreas; Koch, Alexander W.; Roths, Johannes
err分享
err收藏
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure
errADDITIVE MANUFACTURING
IF11.1
err2022-11-01
err19
PREAI
errKnoerlein, Julia; Franke, Martin Michael; Schloffer, Martin; Koerner, Carolin
err分享
err收藏
Prediction and validation of the strongly modulated forced response of two beams undergoing frictional impacts
errMECHANICAL SYSTEMS AND SIGNAL PROCESSING
IF8.9
err2022-11-01
err4
errOAAI
errMonjaraz-Tec, C.; Kohlmann, L.; Schwarz, S.; Hartung, A.; Gross, J.; Krack, M.
err分享
err收藏