科言猫
学术研究的AI总结
首页
文献互助
订阅
我的收藏
课题组
科研工具
选题分析
论文总结
专利管理
专利缴费
专利查询
未登录
返回
M
Mtu Aero Engines
学者数
2
论文数
3
被引数
41
关联论文
(76)
发表时间
发表时间
IF
被引数
Miniature Mechanical Testing to Infer Damage fromAccidental and Complex Thermal Exposure for Single CrystalSuperalloys
微型机械测试以推断单晶高温合金在意外和复杂热暴露下的损伤
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF
2.5
2026-05-01
0
OA
AI
Tang, Yuanbo T.; Schwalbe, Caspar; Brunthaler, Julia; Reed, Roger C.; Utada, Satoshi
分享
收藏
Reducing Low-Pressure Turbine Shroud Leakage Loss by Optimizing Leakage-Mainstream Interaction
通过优化泄漏-主流相互作用来减少低压涡轮机匣泄漏损失
Journal of Turbomachinery-Transactions of the ASME
IF
3.1
2026-05-01
0
OA
AI
Camarero Pueyo, Josue-Inocente; Helmsen, Eike; Oettinger, Marcel; Klingl, Stefan; Junghans, Haris; Palkus, Kacper; Wein, Lars
分享
收藏
A geometric characterisation of PH-cubics via the focus of the cusp curve
通过尖点曲线的焦点对PH三次曲线的几何特征化
Computer Aided Geometric Design
IF
1.7
2026-04-01
0
PRE
AI
Mokris, Dominik
分享
收藏
Numerical Demonstration of NO Emissions Reduction by Steam Injection in the Aero Engine Combustor IAE V2500
通过蒸汽喷射减少IAE V2500航空发动机燃烧室NO排放的数值演示
Journal of Engineering for Gas Turbines and Power-Transactions of the ASME
IF
2.1
2026-03-01
0
PRE
AI
Hiestermann, Marian; Haeringer, Matthias; Desor, Marcel; Niebler, Korbinian; Berger, Lukas
分享
收藏
A Test Facility for the Experimental Investigation of Labyrinth Seal Flutter and Early-Stage Validation of Prediction Techniques
迷宫密封颤振的实验研究和预测技术早期验证测试装置
Journal of Turbomachinery-Transactions of the ASME
IF
3.1
2026-01-01
0
PRE
AI
Mace, Tom; Schwingshackl, Christoph; Korte, Detlef; Greco, Michele; Corral, Roque; Bermejo Jimenez, Oscar; Gallego-Garrido, Jon
分享
收藏
On the Formation of Linear Arrays of σ-Phase Particles and Planar Faults in Single Crystal Ni-Base Superalloys for Aero Engine Turbine Blades
关于航空发动机涡轮叶片单晶镍基高温合金中σ相颗粒线性阵列和平面缺陷的形成
Journal of Materials Research and Technology-JMR&T
IF
6.6
2026-01-01
0
OA
AI
Takuma Saito; Jonathan Streutberger; Clara Pohl; Somsen Christoph; Markus Fried; T. Göhler; Antonin Dlouhý; David Bürger; Alexander Kauffmann; Nico Paufler; Jan A. Frenzel; Gunther Eggeler
分享
收藏
Intake distortions and their impact on compressor stability: an overview and evaluation of current approaches
CEAS Aeronautical Journal
IF
0
2025-10-01
0
PRE
AI
Haber, Amelie; Kozulovic, Dragan
分享
收藏
Deep learning meta architecture to detect spatially coherent coarse grain regions in ultrasonic data
NDT & E INTERNATIONAL
IF
4.5
2025-07-01
0
PRE
AI
Elischberger, Frederik; Jiang, Xiaoyi
分享
收藏
The Black Metal Tribometer: High-resolution measurement of normal load-indentation curves and partial slip hysteresis cycles
黑色金属摩擦计: 正常载荷压痕曲线和部分滑移滞后循环的高分辨率测量
TRIBOLOGY INTERNATIONAL
IF
6.9
2025-06-01
0
OA
AI
Fochler, Daniel; Schwarz, Stefan; Kohlmann, Lukas; Krack, Malte
分享
收藏
A Monte-Carlo approach for crack initiation modeling of cast superalloys informed by crystal plasticity
INTERNATIONAL JOURNAL OF FATIGUE
IF
6.8
2025-01-01
0
PRE
AI
Sayer, Niklas; Fried, Markus; Muenstermann, Sebastian
分享
收藏
Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines
LUBRICANTS
IF
2.9
2024-07-13
0
OA
AI
Golek, Markus; Gleichner, Jakob; Chatzisavvas, Ioannis; Kohlmann, Lukas; Schmidt, Marcus; Reinke, Peter; Rienacker, Adrian
分享
收藏
Influence Factors of Platinum Dissolution in Proton Exchange Membrane Fuel Cells: A Sensitivity Study
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
IF
3.3
2024-05-24
3
OA
AI
Stiegeler, Julian; Mittermeier, Thomas; Tsikonis, Leonidas; Lehre, Thilo; Vierrath, Severin
分享
收藏
Numerical prediction of primary dendrite arm spacing (PDAS), properties of the mushy zone, and freckle risk for various multicomponent Ni-base superalloys using the 3D-phase-field method
COMPUTATIONAL MATERIALS SCIENCE
IF
3.3
2024-03-01
3
OA
AI
Boettger, B.; Seiz, A.; Sowa, R.; Berger, R.; Apel, M.
分享
收藏
A comparison of smooth basis constructions for isogeometric analysis
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
IF
7.3
2024-02-01
4
OA
AI
Verhelst, H. M.; Weinmueller, P.; Mantzaflaris, A.; Takacs, T.; Toshniwal, D.
分享
收藏
Microstructure and mechanical properties of additively manufactured γ-TiAl with dual microstructure
INTERMETALLICS
IF
4.8
2023-10-01
11
PRE
AI
Knorlein, Julia; Franke, Martin Michael; Schloffer, Martin; Berger, Timo; Korner, Carolin
分享
收藏
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide
INTERMETALLICS
IF
4.8
2023-05-01
7
OA
AI
Zeiler, Stefan; Lintner, Arthur; Schloffer, Martin; Pippan, Reinhard; Hohenwarter, Anton
分享
收藏
Interdisciplinary design optimization of compressor blades combining low- and high-fidelity models
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
IF
4
2023-03-16
3
OA
AI
Pretsch, Lisa; Arsenyev, Ilya; Czech, Catharina; Duddeck, Fabian
分享
收藏
Prediction of the crack growth propagation direction in non-proportional mixed-mode missions
INTERNATIONAL JOURNAL OF FATIGUE
IF
6.8
2023-01-01
10
PRE
AI
Amato, Daniele; Mayrhofer, Lukas; Robl, Christian; Dhondt, Guido; Citarella, Roberto
分享
收藏
Generalized and wavelength-dependent temperature calibration function for multipoint regenerated fiber Bragg grating sensors
OPTICS EXPRESS
IF
3.3
2022-11-23
2
OA
AI
Buchfellner, Fabian; Stadler, Andrea; Bian, Qiang; Hennesen, Maximilian; Zeisberger, Andreas; Koch, Alexander W.; Roths, Johannes
分享
收藏
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure
ADDITIVE MANUFACTURING
IF
11.1
2022-11-01
19
PRE
AI
Knoerlein, Julia; Franke, Martin Michael; Schloffer, Martin; Koerner, Carolin
分享
收藏