Naksoo Kim - Publications, H-index & Citations

Naksoo Kim

Sogang University

26H指数

173论文数

2.3K被引数

收录论文 51

发表时间

Bushing Wear Prediction of High-Speed Press Conditions 高速冲压工况下的绝缘套管磨损预测

Materials

IF3.2

2026-06-17

OAAI

Alibek Yuldoshev; Inseo Kim; Joonhee Park; Junhee Chung; Taeyoung Im; Naksoo Kim

Design and Computational Efficiency of a GPU-Resident Integrated Execution Pipeline for Explicit Large-Deformation Finite Element Analysis GPU驻留集成执行流水线的设计与计算效率：用于显式大变形有限元分析

Journal of Manufacturing and Materials Processing

IF3.3

2026-06-03

OAAI

Honglae Kim; Seokmoo Hong; Naksoo Kim

A volume-driven CNN framework replacing expert intuition in 3D forging preform design 一种基于体积驱动的CNN框架，用于替代专家直觉在3D锻造预成形设计中的应用

Journal of Manufacturing Processes

IF6.8

2025-12-17

PREAI

Joonhee Park; Inseo Kim; Dongwhi Park; Inseob Kong; Honglae Kim; Naksoo Kim

Prediction and Verification of Distortion in Products Using Mold Cavity Temperature and Pressure During the High Pressure Die-Casting (HPDC) Process 利用高压压铸（HPDC）过程中模具型腔温度和压力对产品变形的预测与验证

International Journal of Metalcasting

IF2.5

2025-12-09

PREAI

Seungcheol Lee; Hyeokjae Chea; Minsu Park; Dosuck Han; Naksoo Kim

Enhancement of microstructure homogeneity and hardness after heat treatment of forged flex splines with CNN-based preform design 基于CNN的预制件设计对锻造柔性花键热处理后的微观结构均匀性和硬度的提升

Journal of Materials Research and Technology

IF6.6

2025-08-05

PREAI

Joonhee Park; Jaegu Choi; Sangyun Shin; Naksoo Kim

Quantitative framework for evaluating grain flow integrity in disk hot forging processes 盘形件热锻过程中晶粒流线完整性的定量评估框架

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

IF3.1

2025-01-27

PREAI

Han, Byeongchan; Park, Joonhee; Park, Donghwi; Kim, Naksoo

Preform design to reduce forging load and grain size simultaneously in disk forging of IN718

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-07-01

OAAI

Han, Byeongchan; Kim, Kyungmin; Park, Joonhee; Hwang, Seunguk; Kim, Jongsik; Kim, Naksoo

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction

MATERIALS

IF3.2

2024-05-27

OAAI

Guo, Feng; Jeong, Hoyoung; Park, Donghwi; Kim, Geunho; Sung, Booyong; Kim, Naksoo

A Method for Straightening Distorted Giga-Cast Large Thin-Walled Components

MATERIALS

IF3.2

2024-05-10

OAAI

Park, Donghwi; Park, Joonhee; Kim, Naksoo

Detailed preform design procedure considering the effect of heat treatment in IN718 disk forging

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

Kim, Kyungmin; Han, Byeongchan; Kim, Yosep; Kim, Naksoo

Fatigue Life Prediction for Injection-Molded Carbon Fiber-Reinforced Polyamide-6 Considering Anisotropy and Temperature Effects

MATERIALS

IF3.2

2024-01-08

OAAI

Choi, Joeun; Andrian, Yohanes Oscar; Lee, Hyungtak; Lee, Hyungyil; Kim, Naksoo

Strength and manufacturability enhancement of a composite automotive component via an integrated finite element/artificial neural network multi-objective optimization approach

COMPOSITE STRUCTURES

IF7.1

2024-01-01

PREAI

Fonseca, Joao Henrique; Jang, Woojung; Han, Dosuck; Kim, Naksoo; Lee, Hyungyil

Optimizing process parameters for hot forging of Ti-6242 alloy: A machine learning and FEM simulation approach

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-11-01

OAAI

Kim, Yosep; Jeong, Ho Young; Park, Joonhee; Kim, Kyungmin; Kwon, Hyukjoon; Ju, Gyeongjun; Kim, Naksoo

Cogging process design of M50 bearing steel for billet quality

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-09-01

OAAI

Park, Joonhee; Kim, Yosep; Jeong, Hoyoung; Kwon, Hyukjoon; Kwon, Yonghyeok; Kim, Naksoo

A Geometry-Dependent Void Closure Model Considering Void Deformation and Orientation Changes during Hot Metal Formation 考虑铁水形成过程中空隙变形和取向变化的几何相关空隙闭合模型

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING

IF3.3

2023-06-20

OAAI

Kim, Jihyun; Park, Joonhee; Kim, Yosep; Kwon, Hyukjoon; Kim, Naksoo

Manufacturability-constrained optimization for enhancing quality and suitability of injection-molded short fiber-reinforced plastic/metal hybrid automotive structures

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

IF4

2023-04-24

PREAI

Fonseca, Joao Henrique; Lee, Joonhee; Jang, Woojung; Han, Dosuck; Kim, Naksoo; Lee, Hyungyil

Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learning

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-03-01

OAAI

Jeong, Ho Young; Park, Joonhee; Kim, Yosep; Shin, Sang Yun; Kim, Naksoo

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

MATERIALS

IF3.2

2023-02-27

OAAI

Choi, Joeun; Lee, Hyungtak; Lee, Hyungyil; Kim, Naksoo

Extreme gradient boosting-inspired process optimization algorithm for manufacturing engineering applications 面向制造工程应用的极端梯度提升过程优化算法

MATERIALS & DESIGN

IF7.9

2023-02-01

OAAI

Lee, Seungro; Park, Joonhee; Kim, Naksoo; Lee, Taeyong; Quagliato, Luca

Evaluation of equi-biaxial residual stress from spherical indentation imprint

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2021-12-01

PREAI

Jeong, Chanyoung; Hwang, Yewon; Kim, Naksoo; Lee, Cheolsoo; Lee, Hyungyil

研究方向