Asimava Roy Choudhury - Publications, H-index & Citations

Asimava Roy Choudhury

indian institute of technology system (iit system)

27H指数

79论文数

2.0K被引数

收录论文 31

发表时间

Effect of dilution on the properties of laser deposited AlCoCrFeNi high entropy alloy over SS316 substrate 稀释对SS316衬底上激光沉积AlCoCrFeNi高熵合金性能的影响

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-02-01

PREAI

Puneeth, Thati; Panda, Bibhu Kalyan; Nath, Ashish Kumar; Choudhury, Asimava Roy

Development and performance of additively manufactured Tungsten carbide tool insert: An application of additive manufacturing towards flexible and customized machining

TRIBOLOGY INTERNATIONAL

IF6.9

2024-09-01

PREAI

Singh, Anitesh Kumar; Nath, Ashish Kumar; Pratihar, Dilip Kumar; Choudhury, Asimava Roy

Effect of adaptive control of cooling rate on microstructure and mechanical properties of laser additively manufactured Inconel 718 thin walls

MATERIALS CHARACTERIZATION

IF5.5

2024-07-01

PREAI

Nair, Amal Madhavan; Mahata, Amlan; Choudhury, Asimava Roy; Nath, Ashish Kumar

Microstructural and tribological properties of high-performance Inconel 625 alloy-WS2 self-lubricious composite coating by laser assisted cold spray

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-05-01

PREAI

Dey, Dipanjan; Sarkar, Sagar; Mahata, Amlan; Choudhury, Asimava Roy; Nath, Ashish Kumar

Correlation of real-time thermal history with tribological properties of laser coated NiCrBSi with Ag and WS2 addition

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-02-01

PREAI

Dey, Dipanjan; Sarkar, Sagar; Rawal, Sunil; Singh, Anitesh Kumar; Bal, Kalinga Simant; Khande, Manideep; Nath, Ashish Kumar; Choudhury, Asimava Roy

A novel method to reduce dross in laser beam cutting of Ti-6Al-4 V alloy sheet 减少Ti-6Al-4合金板材激光切割中浮渣的新方法

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2021-04-01

PREAI

Singh, Anitesh Kumar; Bal, Kalinga Simant; Pal, Abhishek Rudra; Dey, Dipanjan; Choudhury, Asimava Roy

Investigation into the intergranular corrosion behaviour of electron beam welded Hastelloy C-276 sheet using laser displacement sensor

MEASUREMENT

IF5.6

2019-10-01

PREAI

Bal, Kalinga Simant; Majumdar, Jyotsna Dutta; Choudhury, Asimava Roy

Study of intergranular corrosion mechanism of fiber laser welded 3-mm-thick Hastelloy C-276 sheet

CORROSION SCIENCE

IF8.5

2019-08-01

PREAI

Bal, Kalinga Simant; Majumdar, Jyotsna Dutta; Choudhury, Asimava Roy

Effect of post-weld heat treatment on the tensile strength of laser beam welded Hastelloy C-276 sheets at different heat inputs

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2019-01-01

PREAI

Bal, Kalinga Simant; Majumdar, Jyotsna Dutta; Choudhury, Asimava Roy

Effect of rare earth oxide (Y2O3) addition on alloyed layer synthesized on Ti-6Al-4V substrate with Ti plus SiC plus h-BN mixed precursor by laser surface engineering

TRIBOLOGY INTERNATIONAL

IF6.9

2016-03-01

PREAI

Das, Anil Kumar; Shariff, S. M.; Choudhury, A. Roy

Microstructure and properties of TiB2-TiC-Al2O3 coating prepared by laser assisted SHS and subsequent cladding with micro-/nano-TiO2 as precursor constituent 以微/nano-TiO2为前驱体成分的激光辅助自定义TiB2-TiC-Al2O3熔覆涂层的组织与性能

MATERIALS & DESIGN

IF7.9

2016-01-01

PREAI

Masanta, Manoj; Shariff, S. M.; Choudhury, A. Roy

Application of curved layer manufacturing for preservation of randomly located minute critical surface features in rapid prototyping

RAPID PROTOTYPING JOURNAL

IF3.6

2015-10-19

PREAI

Patel, Yashpal; Kshattriya, Aashish; Singamneni, Sarat B.; Choudhury, A. Roy

A comparative study of the tribological performances of laser clad TiB2-TiC-Al2O3 composite coatings on AISI 1020 and AISI 304 substrates

WEAR

IF6.1

2011-07-01

PREAI

Masanta, Manoj; Shariff, S. M.; Choudhury, A. Roy

Evaluation of modulus of elasticity, nano-hardness and fracture toughness of TiB2-TiC-Al2O3 composite coating developed by SHS and laser cladding

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2011-06-01

128

PREAI

Masanta, Manoj; Shariff, S. M.; Choudhury, A. Roy

Performance evaluation of laser surface alloyed hard nanostructured Al2O3-TiB2-TiN composite coatings with in-situ and ex-situ reinforcements

SURFACE & COATINGS TECHNOLOGY

IF6.1

2011-02-01

PREAI

Chatterjee, Satyajit; Majumdar, J. Dutta; Singaiah, K.; Shariff, S. M.; Padmanabham, G.; Choudhury, A. Roy

Study on the effect of laser post-treatment on the properties of nanostructured Al2O3-TiB2-TiN based coatings developed by combined SHS and laser surface alloying

SURFACE & COATINGS TECHNOLOGY

IF6.1

2010-09-01

PREAI

Chatterjee, Satyajit; Shariff, S. M.; Padmanabham, G.; Majumdar, J. Dutta; Choudhury, A. Roy

Microstructure and mechanical properties of TiB2-TiC-Al2O3-SiC composite coatings developed by combined SHS, sol-gel and laser technology

SURFACE & COATINGS TECHNOLOGY

IF6.1

2010-08-01

PREAI

Masanta, Manoj; Ganesh, P.; Kaul, Rakesh; Choudhury, A. Roy

Tribological behavior of TiB2-TiC-Al2O3 composite coating synthesized by combined SHS and laser technology

SURFACE & COATINGS TECHNOLOGY

IF6.1

2010-05-01

PREAI

Masanta, Manoj; Shariff, S. M.; Choudhury, A. Roy

Effect of h-BN addition on the properties of nanostructured Al2O3-TiB2-TiN based coatings developed by combined SHS and laser surface alloying

SURFACE & COATINGS TECHNOLOGY

IF6.1

2010-02-01

PREAI

Chatterjee, Satyajit; Ganesh, P.; Palai, R.; Wu, J. A.; Kaul, R.; Majumdar, J. Dutta; Choudhury, A. Roy

Development of a hard nano-structured multi-component ceramic coating by laser cladding

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2009-05-01

PREAI

Masanta, Manoj; Ganesh, P.; Kaul, Rakesh; Nath, A. K.; Choudhury, A. Roy

研究方向