S. M. Kulkarni - Publications, H-index & Citations

S. M. Kulkarni

national institute of technology (nit system)

31H指数

206论文数

3.6K被引数

收录论文 30

发表时间

Enhancing energy absorption of luffa-cenosphere-reinforced epoxy composite: Influence of surface modification of reinforcements 增强丝瓜筋-陶粒增强环氧复合材料的能量吸收：增强体表面改性的影响

Journal of Reinforced Plastics and Composites

IF2.2

2026-01-01

PREAI

Gurjar, Ashish Kumar; Kulkarni, Satyabodh M.; Joladarashi, Sharnappa; Doddamani, Saleemsab; Kumar, T. S. Mohan

Optimization of internal geometry for maximum transmission loss in a reactive muffler 反应式消声器内部几何结构优化以实现最大传输损失

Building Acoustics

IF1.9

2025-12-01

PREAI

Kulkarni, Shravani; Kulkarni, Mahesh

Experimental and Numerical Investigation of the Performance of Luffa Fiber-Reinforced Natural Rubber Composites with Process Parameter Optimization using DOE 基于DOE的实验与数值研究：优化工艺参数的丝瓜纤维增强天然橡胶复合材料的性能

FIBERS AND POLYMERS

IF2.3

2025-10-01

PREAI

Gurjar, Ashish Kumar; Kulkarni, S. M.; Joladarashi, Sharnappa; Doddamani, Saleemsab

Drill Pattern Optimisation for Large Complex Blasts to Improve Fragmentation and Dig Efficiency 大型复杂爆破的钻孔模式优化以提高破碎效果和挖掘效率

MATHEMATICAL GEOSCIENCES

IF3.6

2025-01-28

OAAI

Perincek, Ozan; Loxton, Ryan; Kulkarni, Sarang; Arthur, Daniel

Investigation of mechanical properties of luffa fibre reinforced natural rubber composites: Implications of process parameters

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-03-01

OAAI

Gurjar, Ashish Kumar; Kulkarni, Satyabodh M.; Joladarashi, Sharnappa; Doddamani, Saleemsab

Development of rubber-sand composite for enhanced impact resistance: Implications of vulcanization

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH

IF5.4

2024-03-01

OAAI

Doddamani, Saleemsab; Kulkarni, Satyabodh M.; Joladarashi, Sharnappa; Gurjar, Ashish Kumar; Kumar, T. S. Mohan

Comparative study on low velocity impact behavior of natural hybrid and non hybrid flexible thermoplastic based composites

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

IF3.4

2022-12-12

PREAI

Kumbhare, Kartik S.; Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

Analysis of annularly excited bossed diaphragm for performance enhancement of mechanical micropump

SENSORS AND ACTUATORS A-PHYSICAL

IF4.9

2022-03-01

PREAI

Mohith, S.; Karanth, Navin P.; Kulkarni, S. M.

Performance comparison of piezo actuated valveless micropump with central excitation and annular excitation for biomedical applications

SMART MATERIALS AND STRUCTURES

IF3.8

2021-08-31

PREAI

Mohith, S.; Karanth, Navin P.; Kulkarni, S. M.; Desai, Vijay; Patil, Suraj Suresh

Comparative study on ballistic impact response of neat fabric, compliant, hybrid compliant and stiff composite

THIN-WALLED STRUCTURES

IF6.6

2021-08-01

PREAI

Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

Three body abrasive wear assessment of novel jute/natural rubber flexible green composite

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

IF3.4

2021-05-10

PREAI

Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

Progression and characterization of polydimethylsiloxane-carbon black nanocomposites for photothermal actuator applications

SENSORS AND ACTUATORS A-PHYSICAL

IF4.9

2021-03-01

PREAI

Hiremath, Shivashankar; Shrishail, M. H.; Kulkarni, S. M.

Influence of thickness and projectile shape on penetration resistance of the compliant composite 厚度和弹丸形状对柔顺复合材料穿透阻力的影响

DEFENCE TECHNOLOGY

IF5.9

2021-02-01

OAAI

Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

A comprehensive review on material selection for polymer matrix composites subjected to impact load 冲击载荷下聚合物基复合材料材料选择综述

DEFENCE TECHNOLOGY

IF5.9

2021-02-01

110

OAAI

Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

Damage mechanics and energy absorption capabilities of natural fiber reinforced elastomeric based bio composite for sacrificial structural applications

DEFENCE TECHNOLOGY

IF5.9

2021-02-01

OAAI

Mahesh, Vishwas; Joladarashi, Sharnappa; Kulkarni, Satyabodh M.

Development and assessment of large stroke piezo-hydraulic actuator for micro positioning applications

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2021-01-01

PREAI

Mohith, S.; Rao, Muralidhara; Karanth, Navin P.; Kulkarni, S. M.; Upadhya, Adithya R.

Recent trends in piezoelectric actuators for precision motion and their applications: a review

SMART MATERIALS AND STRUCTURES

IF3.8

2020-12-01

269

PREAI

Mohith, S.; Upadhya, Adithya R.; Navin, Karanth P.; Kulkarni, S. M.; Rao, Muralidhara

Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2020-09-01

OAAI

Prabhu, P. R.; Kulkarni, S. M.; Sharma, Sathyashankara

Performance study of jute -epoxy composites/sandwiches under normal ballistic impact 黄麻-环氧复合材料/三明治在正常弹道冲击下的性能研究

DEFENCE TECHNOLOGY

IF5.9

2020-08-01

OAAI

Rajole, Sangamesh; Ravishankar, K. S.; Kulkarni, S. M.

Performance analysis of valveless micropump with disposable chamber actuated through Amplified Piezo Actuator (APA) for biomedical application

MECHATRONICS

IF3.1

2020-05-01

PREAI

Mohith, S.; Karanth, Navin P.; Kulkarni, S. M.

研究方向