Zhigang Lu

Tsinghua University

H指数:23

被引数:1,657

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Programmable ceramic 4D printing via multi-material vat photopolymerization

通过多材料大桶光聚合实现可编程陶瓷4D打印

ADDITIVE MANUFACTURING

IF11.1

2024-05-010

PRE

Cellular automata simulation of interlayer microstructure for alumina ceramic sintering process formed by vat photopolymerization

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2024-04-011

PRE

Forming deviation coupling model and control method in the photopolymerization process of ceramic slurry

CERAMICS INTERNATIONAL

IF5.6

2024-03-011

PRE

Study on mechanical properties and ratio parameter optimization of fly ash wet shotcrete under the influence of multiple factors

CASE STUDIES IN CONSTRUCTION MATERIALS

IF6.6

2023-12-014

OAAI

Optimization-based non-equidistant toolpath planning for robotic additive manufacturing with non-underfill orientation

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

IF11.4

2023-12-015

PRE

Enhancing Forest Canopy Height Retrieval: Insights from Integrated GEDI and Landsat Data Analysis

SUSTAINABILITY

IF3.3

2023-07-024

Effect of sintering aids on mechanical properties and microstructure of alumina ceramic via stereolithography

烧结助剂对氧化铝陶瓷力学性能和微观结构的影响

CERAMICS INTERNATIONAL

IF5.6

2023-06-0121

PRE

The effect of particle size distribution on the microstructure and properties of Al2O3 ceramics formed by stereolithography

CERAMICS INTERNATIONAL

IF5.6

2022-08-0125

PRE

High-resolution multiceramic additive manufacturing based on digital light processing

ADDITIVE MANUFACTURING

IF11.1

2022-06-0131

PRE

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

数字光处理3D打印氧化铝陶瓷片层结构形成机理及控制策略

ADDITIVE MANUFACTURING

IF11.1

2022-04-0131

PRE

Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades

在空心涡轮叶片的DLP-3D印刷Al2O3芯中平衡弯曲强度和孔隙率

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2022-03-0171

PRE

Experimental and numerical analysis on the leading-edge bulge effect during the recoating process in ceramic stereolithography

ADDITIVE MANUFACTURING

IF11.1

2022-03-018

PRE

The effect of light scattering in stereolithography ceramic manufacturing

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2021-11-0164

PREAI

The influence of sintering procedure and porosity on the properties of 3D printed alumina ceramic cores

烧结工艺和孔隙率对3D打印氧化铝陶瓷型芯性能的影响

CERAMICS INTERNATIONAL

IF5.6

2021-10-0157

PREAI

Enhanced 3D printed alumina ceramic cores via impregnation

通过浸渍增强的3D打印氧化铝陶瓷芯

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2021-09-1412

PRE

Effect of organic fibers addition on digital light processing for Al2O3 porous ceramics

有机纤维添加对Al2O3多孔陶瓷数字光加工的影响

CERAMICS INTERNATIONAL

IF5.6

2021-08-0121

PREAI

Creep mechanism of zircon-added silica ceramic cores formed by stereolithography

CERAMICS INTERNATIONAL

IF5.6

2021-06-0129

PREAI

Improved mechanical properties of silica ceramic cores prepared by 3D printing and sintering processes

通过3D打印和烧结工艺制备的二氧化硅陶瓷芯的改善的机械性能

SCRIPTA MATERIALIA

IF5.6

2021-03-0163

PREAI

Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum

在真空中烧结的立体光刻形成的氧化铝芯的微观结构和力学性能的演变

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2020-11-0187

PREAI

Effects of Solvent Debinding on the Microstructure and Properties of 3D-Printed Alumina Ceramics

ACS OMEGA

IF4.3

2020-10-1631

OAAI

Zhigang Lu

个人简介

教育背景

工作经历

荣誉奖项

研究方向