logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mateusz Barczewski

poznan university of technology

34H指数
236论文数
3.9K被引数
收录论文 95
发表时间
logo
Turmeric-Containing Polymer–Mineral Composites with a Waste Cooking Oil-Derived Binder: Physicochemical Characterisation and Exploratory Antimicrobial Screening含姜黄聚合物-矿物复合材料：基于废弃食用油衍生粘合剂的物理化学表征和探索性抗菌筛选
errMaterials
IF3.2
err2026-08-31
err0
errOAAI
errAnita Zawadzka; Magda Kijania-Kontak; Barbara Pucelik; Agata Barzowska-Gogola; Mateusz Barczewski; Sandra Paszkiewicz; Zbigniew Rozwadowski; Paweł Staroń
err分享
err收藏
Searching for controlled exceedance of biomass degradation phenomena in polyethylene – wood flour and coffee spent grains melt-blending pre-processing for composites manufacturing by rotational molding在旋转模塑制备复合材料过程中，通过聚乙烯-木粉和咖啡废渣熔融共混预处理，寻找可控的生物质降解现象超限情况
errComposites Communications
IF7.7
err2026-08-27
err0
errOAAI
errJoanna Aniśko-Michalak; Aleksander Hejna; Bogusława Waliszewska; Magdalena Zborowska; Adam Piasecki; Marek Szostak; Wiktoria Żukowska; Mateusz Barczewski
err分享
err收藏
Process-oriented correlative analysis of the nucleation effectiveness of potassium salt of 3,5-bis(methoxycarbonyl)benzenesulfonate (LAK-301) on the structure and mechanical properties of injection molded polylactide (PLA)基于3,5-双(甲氧羰基)苯磺酸钾盐(LAK-301)成核效率对注塑聚乳酸(PLA)结构与力学性能的过程导向相关性分析
errJournal of Polymer Research
IF2.8
err2026-03-30
err0
PREAI
errMateusz Barczewski; Jakub Cyganek; Tomasz Runka; Danuta Matykiewicz; Olga Mysiukiewicz; Aleksander Hejna; Karolina Olszewska; Beata Dudziec; Sandra Paszkiewicz
err分享
err收藏
On the Structure of Poly(Lactic Acid) (PLA)/Poly(Ethylene 2,5-Furandicarboxylate) (PEF) Blends Processed in No-Shearing Conditions of Rotational Molding Technology关于在旋转成型技术无剪切条件下制备的聚乳酸(PLA)/聚(2,5-呋喃二羧酸乙烯酯)(PEF)共混物的结构
errJournal of Polymers and the Environment
IF5
err2026-03-09
err0
PREAI
errMateusz Barczewski; Joanna Aniśko-Michalak; Izabela Irska; Adam Piasecki; Paweł Figiel; Jacek Andrzejewski; Aleksander Hejna; Beata Dudziec; Sandra Paszkiewicz
err分享
err收藏
The Use of the Overmolding Technique for the Preparation of Basalt Fiber (BF)-Based Composite, the Comparative Study of Poly(ethylene terephthalate)/Polycarbonate—PET/PC and Poly(butylene terephthalate)—PBT/PC Blends利用过模塑技术制备玄武岩纤维（BF）基复合材料，聚对苯二甲酸乙二醇酯/聚碳酸酯—PET/PC与聚对苯二甲酸丁二醇酯—PBT/PC共混物的比较研究
errPolymers
IF4.9
err2026-03-04
err0
errOAAI
errJacek Andrzejewski; Wiktoria Gosławska; Michalina Salamaga; Weronika Zgoła; Mateusz Barczewski
err分享
err收藏
Turning Disposed into Disposable—Development of Single-Use Products from Underutilized Brewery Wastes将废弃变可弃——从未充分利用的啤酒厂废料开发一次性产品
errFoods
IF5.1
err2026-03-04
err0
errOAAI
errAleksander Hejna; Mateusz Barczewski
err分享
err收藏
Rotational molding processing performance and structure of high-density polyethylene (HDPE) composites with basalt powder (BP) and talc (T): The influence of mold wall thickness and filler typeBarczewski, M.; Aniśko-Michalak, J.; Mietliński, P.; Szulc, J.; Bartnicki, A.; Szostak, M.; Hejna, A. 高密度聚乙烯（HDPE）复合材料（含玄武岩粉（BP）和滑石粉（T））的旋转成型加工性能与结构：模具壁厚和填料类型的影响。Int. J. Lightweight Mater. Manuf. 2025. [Google Scholar] [CrossRef]
errInternational Journal of Lightweight Materials and Manufacture
IF0
err2026-03-01
err2
PREAI
errBarczewski, Mateusz; Anisko-Michalak, Joanna; Mietlinski, Patryk; Szulc, Joanna; Bartnicki, Adrian; Szostak, Marek; Hejna, Aleksander
err分享
err收藏
Role of Bio-Based and Petroleum-Origin Monomers on the Tailoring of Thermoplastic Elastomer (TPE) Properties and Structure as a Matrix for Composites with Plant-Based and Inorganic Fillers生物基与石油基单体在定制热塑性弹性体（TPE）作为植物基和无机填料复合材料基体时对其性能和结构的影响作用
errPolymers
IF4.9
err2026-02-26
err0
errOAAI
errSandra Paszkiewicz; Zaida Ortega; Izabela Irska; Konrad Walkowiak; Adam Piasecki; Mateusz Barczewski
err分享
err收藏
Valorization of Cork Waste in Particleboards Production with Innovative Binder使用创新的粘合剂在刨花板生产中增加软木废料的成本
errMaterials
IF3.2
err2026-02-08
err0
errOAAI
errAleksander Hejna; Mateusz Barczewski; Jacek Andrzejewski; Adam Piasecki; Paulina Kosmela; Marek Szostak
err分享
err收藏
Deepening the understanding and extending the potential of waste biomass temperature treatment using sunflower husk as an example以向日葵壳为例，深化对废弃物生物质热处理的理解并拓展其潜力
errBiomass and Bioenergy
IF5.8
err2025-11-30
err0
PREAI
errAleksander Hejna; Bogusława Waliszewska; Magdalena Zborowska; Mateusz Barczewski; Joanna Szulc; Justyna Paszkot; Joanna Kawa-Rygielska; Paulina Kosmela; Magdalena Woźniak; Izabela Ratajczak; Adam Piasecki; Tomasz Cygan; Kamila Sałasińska
err分享
err收藏
Turning Fruit Seed Oils into High-Performance Open-Cell Polyurethane Foams: A Green Route to Petrochemical Polyol-Free Insulation将水果籽油转化为高性能开孔聚氨酯泡沫：一种绿色路线，实现无石化聚醚多元醇的隔热材料
errMaterials 2025, Vol. 18, Page 5387
IF3.2
err2025-11-29
err0
errOAAI
errMaria Kurańska; Elżbieta Malewska; Mateusz Barczewski; Joanna Banaś; Aleksandra Put; Julia Sędzimir; Hubert Ożóg; Natalia Kowalik; Marcin Zemła; Michał Kucała
err分享
err收藏
Physico-Chemical, Rheological, and Antiviral Properties of Poly(butylene succinate) Biocomposites with Terpene—Hydrophobized Montmorillonite聚丁二酸丁二酯生物复合材料的物理化学、流变学及抗病毒性能研究——以萜烯改性蒙脱土为例
errPolymers 2025, Vol. 17, Page 2984
IF4.9
err2025-11-10
err0
errOAAI
errMagdalena Zdanowicz; Mateusz Barczewski; Małgorzata Mizielińska; Piotr Miądlicki
err分享
err收藏
Scots pine and caucasian fir needles as functional fillers of polylactide-based (PLA) composites苏格兰松树和南欧冷杉针叶作为聚乳酸基（PLA）复合材料的功 能填料
errCellulose
IF4.8
err2025-10-15
err0
errOAAI
errMateusz Barczewski; Joanna Aniśko-Michalak
err分享
err收藏
Correlation between rotational molding process temperature and degradation changes of polyethylene and composites containing coffee spent grounds used as an active filler聚乙烯及其以咖啡渣作为活性填料制成的复合材料中，旋转成型工艺温度与降解变化之间的相关性
errSustainable Materials and Technologies
IF9.2
err2025-09-14
err0
errOAAI
errMateusz Barczewski; Joanna Aniśko-Michalak; Katarzyna Skórczewska; Mateusz Maniak; Paulina Kosmela; Wiktoria Żukowska; Anna Przybylska-Balcerek; Lidia Szwajkowska-Michałek; Kinga Stuper-Szablewska; Bogusława Waliszewska; Magdalena Zborowska; Joanna Szulc; Aleksander Hejna
err分享
err收藏
Evaluation of Thermomechanical Properties of Polymer Blends Intended for Additive Manufacturing Processing: Comparative Study of Poly(Lactic Acid) and Poly(Lactic Acid)/Polyhydroxyalkanoate Blends用于增材制造加工的聚合物共混物热机械性能评估：聚乳酸与聚乳酸/聚羟基烷酸酯共混物的比较研究
errPolymers 2025, Vol. 17, Page 2454
IF0
err2025-09-10
err0
errOAAI
errJacek Andrzejewski; Katarzyna Skórczewska; Mateusz Barczewski
err分享
err收藏
Ecofriendly PEF- and PBF-Based Blends with Epoxidized Natural Rubber: Unraveling the Structure–Property Relationship环保型PEF和PBF基共混物与环氧化天然橡胶：解析结构与性能关系
errMaterials 2025, Vol. 18, Page 4040
IF3.2
err2025-08-29
err0
errOAAI
errSandra Paszkiewicz; Konrad Walkowiak; Izabela Irska; Jakub Śmigielski; Elżbieta Piesowicz; Aleksander Hejna; Beata Dudziec; Mateusz Barczewski
err分享
err收藏
The impact of brewers' spent grain type on the structure and performance of poly(ε-caprolactone)-based composites啤酒废料类型对聚己内酯基复合材料结构和性能的影响
errCellulose
IF4.8
err2025-08-20
err0
errOAAI
errAleksander Hejna; Hubert Cieśliński; Katarzyna Skórczewska; Paulina Kosmela; Joanna Aniśko-Michalak; Adam Piasecki; Mateusz Barczewski
err分享
err收藏
Recycling of HDPE-giant reed composites: Processability and performanceHDPE-巨杆草复合材料的回收利用：可加工性与性能
errGREEN PROCESSING AND SYNTHESIS
IF3
err2025-05-16
err0
errOAAI
errSuarez, Luis; Barczewski, Mateusz; Billham, Mark; Miklaszewski, Andrzej; Mietlinski, Patryk; Ortega, Zaida
err分享
err收藏
Application of Bio-Based Epoxy Resin Synthesized from Eugenol in Composites Reinforced with Flax, Nettle, and Basalt Fabrics基于丁香合成的生物基环氧树脂在亚麻、荨麻和玄武岩织物增强复合材料中的应用
errJOURNAL OF NATURAL FIBERS
IF3.1
err2025-05-08
err0
errOAAI
errDanuta Matykiewicz; Beata Dudziec; Mateusz Barczewski; Adam Piasecki
err分享
err收藏
Pushing temperature boundaries in wood-plastic composites' manufacturing by transdisciplinary paradigm shift: Novel functionalities, higher resource efficiency, and extended application range通过跨学科范式转变推动木塑复合材料制造的温度边界：新型功能、更高的资源效率和扩展的应用范围
errJOURNAL OF BIORESOURCES AND BIOPRODUCTS
IF13
err2025-05-01
err0
errOAAI
errAleksander Hejna; Mateusz Barczewski
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
V
Vijay Kumar Thakur
H 指数: 110 · 论文数: 608
陈
陈峰 (Feng Chen)
H 指数: 103 · 论文数: 944
M
Mohammad Reza Saeb
H 指数: 89 · 论文数: 630
S
S. Mohammad Sajadi
H 指数: 77 · 论文数: 402
T
Teofil Jesionowski
H 指数: 69 · 论文数: 789
查看更多