logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
G

Gururaj Bolar

manipal academy of higher education (mahe)

12H指数
63论文数
712被引数
收录论文 20
发表时间
logo
Modelling and metaheuristic optimization for improving machining performance of low alloy steel低合金钢加工性能提升的建模与元启发式优化
errDiscover Applied Sciences
IF2.4
err2026-05-13
err0
PREAI
errMarakini, Vikas; Kumar, K. Dilip; D'Mello, Grynal; Itoh, Takamoto; Bolar, Gururaj
err分享
err收藏
Effect of stacking sequence on the mechanical behaviour of CARALL and GLARE fiber metal laminates层叠顺序对CARALL和GLARE纤维金属层压板力学行为的影响
errScientific Reports
IF3.9
err2026-04-24
err0
errOAAI
errMadhusudhan Balkundhi; Satish Shenoy Baloor; Gururaj Bolar
err分享
err收藏
Statistical Multi-Response Optimization and Prediction of Abrasive Water Jet Machining Process Parameters for HRS Fiber/CNT/Epoxy Hybrid Composites统计多响应优化与预测：用于HRS纤维/CNT/环氧树脂混杂复合材料的水射流加工工艺参数
errJournal of Composites Science
IF3.7
err2026-04-04
err0
errOAAI
errSupriya J. P; Raviraj Shetty; Gururaj Bolar; Rajesh Nayak; Sawan Shetty; Adithya Hegde
err分享
err收藏
Sustainability and machinability evaluation of drilling WAAM-CMT and Wrought Ti-6Al-4V: Comparison of three drilling tools可持续性与可加工性评价：WAAM-CMT 和锻造 Ti-6Al-4V 钻孔工艺比较——三种钻头工具对比
errCleaner Engineering and Technology
IF6.5
err2026-02-11
err0
errOAAI
errNavneet Khanna; Harsh Vesuwala; Harsh Salvi; Jonny Singla; Navin Kumar; Anuj Bansal; Anil Kumar Singla; Gururaj Bolar
err分享
err收藏
Analysis of machining induced damage when drilling hybrid carbon fiber-reinforced aluminum laminates钻削混杂碳纤维增强铝层合板时加工引入损伤的分析
errJournal of Composite Materials
IF2.4
err2026-02-01
err0
PREAI
errBolar, Gururaj; Satish Shenoy, Baloor; Zitoune, Redouane; Madhusudhan, Balkundhi; Dinesh, Anoop Aroor; He, Yanli
err分享
err收藏
Artificial Neural Network-Based Prediction and Validation of Drill Flank Wear in GFRP Machining for Sustainable and Smart Manufacturing基于人工神经网络的GFRP加工中钻头后刀面磨损的预测与验证，用于可持续与智能制造
errCMC-Computers Materials & Continua
IF1.7
err2026-01-01
err0
PREAI
errUdupi, Sathish Rao; Bolar, Gururaj; Shettar, Manjunath; Bhat, Ashwini
err分享
err收藏
Cryogenic and conventional machining using CVD-coated inserts to improve the surface characteristics of low-carbon steel alloy E350低温和常规加工使用CVD涂层刀片以改善低碳钢合金E350的表面特性
errCogent Engineering
IF2.5
err2025-12-31
err0
PREAI
errVijayendra, Sagar; Marakini, Vikas; Pai, K. Raghavendra; Pai, P. Srinivasa; Bolar, Gururaj
err分享
err收藏
Integrating soft computing approach to optimize and predict powder mixed wire electric discharge machinability characteristics of PBLF-Ti-6Al-4V alloy将软计算方法集成以优化和预测PBLF-Ti-6Al-4V合金粉末混合线切割放电加工工艺特性
errCogent Engineering
IF2.5
err2025-12-31
err0
PREAI
errBolar, Gururaj; Nayak, Rajesh; Shetty, Raviraj; J. P., Supriya; Hegde, Adithya
err分享
err收藏
Tribological wear analysis of HRS/CNT polymer hybrid composites using statistical optimization technique采用统计优化技术对HRS/CNT聚合物混杂复合材料的摩擦磨损分析
errINTERNATIONAL JOURNAL OF SYSTEM ASSURANCE ENGINEERING AND MANAGEMENT
IF1.4
err2025-12-01
err0
PREAI
errSupriya, J. P.; Bolar, Gururaj; Shetty, Raviraj; Nayak, Rajesh; Shetty, Sawan; Hegde, Adithya
err分享
err收藏
A synergistic approach for thermal characteristic analysis of hibiscus rosa-sinensis/carbon nano-tubes/epoxy based hybrid composites using soft computing techniquesSupriya, J.P.; Shetty, R.; Shetty, S.; Nayak, R.; Bolar, G.; Hegde, A.L. 利用软计算技术研究木槿 rosa-sinensis/碳纳米管/环氧基混杂复合材料的协同热特性分析方法。Mater. Res. Express 2025. [Google Scholar] [CrossRef]
errMATERIALS RESEARCH EXPRESS
IF2.2
err2025-12-01
err1
PREAI
errSupriya, J. P.; Shetty, Raviraj; Shetty, Sawan; Nayak, Rajesh; Bolar, Gururaj; Hegde, Adithya
err分享
err收藏
Thermal Influence on the Mechanical Performance and Deformation Characteristics of Symmetric and Asymmetric GFRP Laminates热效应对对称和非对称GFRP层压板力学性能和变形特性的影响
errJournal of Composites Science 2025, Vol. 9, Page 636
IF3.7
err2025-11-19
err0
errOAAI
errJuveriya Sayyed; Prashantha Acharya; Sriharsha Hegde; Gururaj Bolar; Manjunath Shetty; Thara Reshma I. V.; Padmaraj N. H.
err分享
err收藏
Effect of temperature and stacking sequence on the impact behavior of CARALL fiber metal laminates温度和铺层顺序对CARALL纤维金属层压板冲击行为的影响
errMATERIALS RESEARCH EXPRESS
IF2.2
err2025-10-01
err0
PREAI
errBalkundhi, Madhusudhan; Baloor, Satish Shenoy; Bolar, Gururaj
err分享
err收藏
Indigenous biodegradable cutting fluid effect on workpiece surface morphology and tool wear during machining of resorbable magnesium alloy原位生物降解切削液对可吸收镁合金加工中工件表面形貌和刀具磨损的影响
errTribology International
IF6.9
err2025-09-16
err0
PREAI
errMaddula Shanmuka Srinivas; Khetavath Roja; null Shyam; Kishor Kumar Gajrani; Gururaj Bolar; Govind Bajargan; Shihabudheen Mundampra Maliyekkal; Jitendra Kumar Katiyar; Mamilla Ravi Sankar
err分享
err收藏
Assessment of surface treatment methods for strengthening the interfacial adhesion in CARALL fiber metal laminates
errSCIENTIFIC REPORTS
IF3.9
err2024-12-28
err0
errOAAI
errBalkundhi, Madhusudhan; Baloor, Satish Shenoy; Bolar, Gururaj
err分享
err收藏
Cryogenic and conventional milling of AZ91 magnesium alloy
errJOURNAL OF MAGNESIUM AND ALLOYS
IF13.8
err2024-06-01
err2
errOAAI
errMarakini, Vikas; Pai, P. Srinivasa; Bolar, Gururaj; Achar, Bhaskara P.
err分享
err收藏
Performance Analysis of Helical Milling and Drilling Operations While Machining Carbon Fiber-Reinforced Aluminum Laminates
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2024-05-29
err0
errOAAI
errBolar, Gururaj; Dinesh, Anoop Aroor; Polishetty, Ashwin; Shetty, Raviraj; Hiremath, Anupama; Neelakantha, V. L.
err分享
err收藏
Machining Temperature, Surface Integrity and Burr Size Investigation during Coolant-Free Hole Milling in Ti6Al4V Titanium AlloyTi6Al4V钛合金无冷却剂孔铣削过程中的加工温度，表面完整性和毛刺尺寸研究
errLUBRICANTS
IF2.9
err2023-08-15
err12
errOAAI
errShanmugam, Ragavanantham; Baloor, Satish Shenoy; Koklu, Ugur; Polishetty, Ashwin; Bolar, Gururaj
err分享
err收藏
Assessment of ignition risk in dry helical hole milling of AZ31 magnesium alloy considering the machining temperature and chip morphology
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-05-01
err6
PREAI
errBolar, Gururaj; Adhikari, Raviraja; Nayak, Sadvidya N.; Joshi, Shrikrishna N.
err分享
err收藏
A comprehensive study on solidification (hot) cracking in austenitic stainless steel welds from a microstructural approach
errINTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
IF3.5
err2021-12-01
err14
PREAI
errRamon, Jasper; Basu, Ritwik; Vander Voort, George; Bolar, Gururaj
err分享
err收藏
Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components薄壁零件立铣过程中切削力及产品表面质量的测量与分析
errMEASUREMENT
IF5.6
err2018-06-01
err78
PREAI
errBolar, Gururaj; Das, Argha; Joshi, Shrikrishna N.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
N
Navneet Khanna
H 指数: 46 · 论文数: 171
S
Shrikrishna N. Joshi
H 指数: 34 · 论文数: 196
A
Anil Kumar Singla
H 指数: 33 · 论文数: 154
M
Mamilla Ravi Sankar
H 指数: 33 · 论文数: 201
U
Uğur Köklü
H 指数: 29 · 论文数: 102
查看更多