Galya Duncheva - Publications, H-index & Citations

Galya Duncheva

Technical University of Gabrovo

21H指数

70论文数

1.2K被引数

收录论文 25

发表时间

Effects of Heat Treatment Procedures and Diamond Burnishing on Tensile Properties and Surface Integrity of Additively Manufactured 17-4PH Steel Cylindrical Parts 热处理工艺和金刚石压光对增材制造17-4PH钢圆柱件拉伸性能及表面完整性的影响

Materials

IF3.2

2026-05-23

OAAI

Galya Duncheva; Jordan Maximov; Vladimir Dunchev; Angel Anchev; Vladimir Todorov; Yaroslav Argirov; Kalin Anastasov; Hristian Mitev

Effects of Cutting Insert Flank Wear in Previous Turning and Subsequent Diamond Burnishing on the Surface Integrity, Microstructure and Fatigue Limit of Heat-Treated C45 Steel 前一次车削中刀片后刀面磨损及后续金刚石滚压对热处理C45钢表面完整性、微观结构和疲劳极限的影响

Metals

IF2.5

2026-05-12

OAAI

Jordan Maximov; Galya Duncheva; Angel Anchev; Vladimir Dunchev; Kalin Anastasov; Mariana Ichkova

Effects of Electron Beam Hardening Parameters on the Residual Stresses and Microstructures in C45 Steel Cylindrical Specimens 电子束硬化参数对C45钢圆柱试样残余应力和微观结构的影响

Journal of Manufacturing and Materials Processing

IF3.3

2026-03-03

OAAI

Galya Duncheva; Vladimir Dunchev; Milka Atanasova; Vladimir Todorov; Yaroslav Argirov; Marieta Ivanova; Boris Petkov

Effects of Surface Layer Modification on Fatigue, Corrosion, and Wear Behaviour in Metallic Materials

Coatings

IF2.8

2026-01-26

OAAI

Jordan Maximov; Galya Duncheva

Improvements in the Surface Integrity and Operating Behaviour of Metal Components Through Slide Burnishing with Non-Diamond-Based Deforming Elements: Review and Perspectives 通过非金刚石基变形元件的滑移滚压对金属部件的表面完整性和运行性能的改进：综述与展望

APPLIED SCIENCES-BASEL

IF2.5

2025-11-17

PREAI

Maximov, Jordan; Duncheva, Galya

Influence of Previous Turning on the Surface Integrity Stability of Diamond-Burnished Medium-Carbon Steel 前期车削对金刚石滚压中碳钢表面完整性稳定性的影响

MACHINES

IF2.5

2025-09-17

OAAI

Maximov, Jordan; Duncheva, Galya; Anastasov, Kalin; Ichkova, Mariana; Daskalova, Petya

Sustainable Combined Process for Improving Surface Integrity and Fatigue Strength of Heat-Treated 42CrMo4 Steel Shafts and Axles 可持续组合工艺用于改善热处理42CrMo4钢轴和车轴的表面完整性与疲劳强度

Metals 2025, Vol. 15, Page 755

IF2.5

2025-08-24

PREAI

Jordan Maximov; Galya Duncheva; Angel Anchev; Vladimir Dunchev; Kalin Anastasov; Mariana Ichkova

Effects of diamond burnishing on surface integrity, fatigue, wear, and corrosion of metal components—review and perspectives 金刚石碾光对金属组件表面完整性、疲劳、磨损和腐蚀的影响——综述与展望

international journal of advanced manufacturing technology

IF0

2025-07-29

PREAI

Jordan Maximov; Galya Duncheva

Cold working technologies for increasing the fatigue life of metal structural components with fastener holes-review and perspectives 冷加工技术提高带紧固孔金属结构件疲劳寿命的研究综述与展望

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

IF3.1

2025-01-16

PREAI

Duncheva, Galya; Maximov, Jordan

Effects of Heat Treatment and Severe Surface Plastic Deformation on Mechanical Characteristics, Fatigue, and Wear of Cu-10Al-5Fe Bronze

MATERIALS

IF3.2

2022-12-13

OAAI

Maximov, Jordan; Duncheva, Galya; Anchev, Angel; Dunchev, Vladimir; Argirov, Yaroslav; Todorov, Vladimir; Mechkarova, Tatyana

Enhancement of the wear resistance of CuAl9Fe4 sliding bearing bushings via diamond burnishing

WEAR

IF6.1

2022-12-01

PREAI

Duncheva, G. V.; Maximov, J. T.; Anchev, A. P.; Dunchev, V. P.; Argirov, Y. B.; Kandeva-Ivanova, M.

Influence of Factors in the Photopolymerization Process on Dental Composites Microhardness

MATERIALS

IF3.2

2022-09-17

OAAI

Maximov, Jordan; Dikova, Tsanka; Duncheva, Galya; Georgiev, Georgi

Effect of Diamond Burnishing on Fatigue Behaviour of AISI 304 Chromium-Nickel Austenitic Stainless Steel

MATERIALS

IF3.2

2022-07-07

OAAI

Maximov, Jordan; Duncheva, Galya; Anchev, Angel; Dunchev, Vladimir; Argirov, Yaroslav

Multi-objective optimization of the internal diamond burnishing process

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2021-09-26

PREAI

Duncheva, Galya, V; Maximov, Jordan T.; Anchev, Angel P.; Dunchev, Vladimir P.; Argirov, Yaroslav B.

Effect of cyclic hardening on fatigue performance of slide burnished components made of low-alloy medium carbon steel 循环硬化对低合金中碳钢制成的滑动抛光组件的乏力性能的影响

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2019-02-27

PREAI

Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Ganev, N.; Dunchev, V. P.

Impact of slide diamond burnishing additional parameters on fatigue behaviour of 2024-T3 Al alloy

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2018-08-31

OAAI

Maximov, Jordan T.; Anchev, Angel P.; Duncheva, Galya V.; Ganev, Nikolaj; Selimov, Kenan F.; Dunchev, Vladimir P.

Effect of slide burnishing basic parameters on fatigue performance of 2024-T3 high-strength aluminium alloy

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2017-03-23

PREAI

Maximov, J. T.; Anchev, A. P.; Dunchev, V. P.; Ganev, N.; Duncheva, G. V.; Selimov, K. F.

A new conception for enhancement of fatigue life of large number of fastener holes in aircraft structures

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2016-06-20

PREAI

Duncheva, G. V.; Maximov, J. T.; Ganev, N.

Fatigue life enhancement of welded stiffened S355 steel plates with noncircular openings

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH

IF4.3

2015-09-01

PREAI

Duncheva, Galya; Maximov, Jordan; Ganev, Nikolaj; Ivanova, Marieta

Modeling of strain hardening and creep behaviour of 2024T3 aluminium alloy at room and high temperatures

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2014-02-01

PREAI

Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Ichkova, M. D.

研究方向