logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
V

Vladimir Dunchev

Technical University of Gabrovo

14H指数
77论文数
634被引数
收录论文 14
发表时间
logo
Microstructural and Mechanical Properties of Titanium Boride Coatings Fabricated by an Electron Beam Surface Modification电子束表面改性制备的硼化钛涂层微观结构与力学性能
errJournal of Manufacturing and Materials Processing
IF3.3
err2026-08-30
err0
errOAAI
errFatme Padikova; Ivana Ilievska; Lyubomira Veleva; Tatyana Koutzarova; Georgi Kotlarski; Nikolay Nedyalkov; Maria Ormanova; Vladimir Dunchev; Borislav Stoyanov; Stefan Valkov
err分享
err收藏
Effects of Heat Treatment Procedures and Diamond Burnishing on Tensile Properties and Surface Integrity of Additively Manufactured 17-4PH Steel Cylindrical Parts热处理工艺和金刚石压光对增材制造17-4PH钢圆柱件拉伸性能及表面完整性的影响
errMaterials
IF3.2
err2026-05-23
err0
errOAAI
errGalya Duncheva; Jordan Maximov; Vladimir Dunchev; Angel Anchev; Vladimir Todorov; Yaroslav Argirov; Kalin Anastasov; Hristian Mitev
err分享
err收藏
Effects of Cutting Insert Flank Wear in Previous Turning and Subsequent Diamond Burnishing on the Surface Integrity, Microstructure and Fatigue Limit of Heat-Treated C45 Steel前一次车削中刀片后刀面磨损及后续金刚石滚压对热处理C45钢表面完整性、微观结构和疲劳极限的影响
errMetals
IF2.5
err2026-05-12
err0
errOAAI
errJordan Maximov; Galya Duncheva; Angel Anchev; Vladimir Dunchev; Kalin Anastasov; Mariana Ichkova
err分享
err收藏
Effects of Electron Beam Hardening Parameters on the Residual Stresses and Microstructures in C45 Steel Cylindrical Specimens电子束硬化参数对C45钢圆柱试样残余应力和微观结构的影响
errJournal of Manufacturing and Materials Processing
IF3.3
err2026-03-03
err0
errOAAI
errGalya Duncheva; Vladimir Dunchev; Milka Atanasova; Vladimir Todorov; Yaroslav Argirov; Marieta Ivanova; Boris Petkov
err分享
err收藏
The Impact of CO2 Laser Treatment on Kevlar® KM2+ Fibres Fabric Surface Morphology and Yarn Pull-Out ResistanceKukle, S.; Lazov, L.; Lohmus, R.; Briedis, U.; Adijans, I.; Bake, I.; Dunchev, V.; Teirumnieka, E. CO2激光处理对Kevlar® KM2+纤维织物表面形貌及纱线拔出阻力的影响. Polymers 2025, 17, 2931. [Google Scholar] [CrossRef]
errPolymers
IF4.9
err2026-03-03
err0
errOAAI
errSilvija Kukle; Lyubomir Lazov; Rynno Lohmus; Ugis Briedis; Imants Adijans; Ieva Bake; Vladimir Dunchev; Erika Teirumnieka
err分享
err收藏
Biphasic Calcium Phosphates Prepared via Heat Treatment of Powders Synthesized by Wet Precipitation Using Phosphoric Acid and Calcium Hydroxide通过磷酸和氢氧化钙湿法沉淀合成的粉末热处理后制备的双相磷酸钙
errMaterials Science-Medziagotyra
IF0.6
err2026-01-01
err0
PREAI
errDikova, Tsanka; Parushev, Ivaylo; Dunchev, Vladimir; Yotsova, Ralitsa; Ismailov, Ismail; Ivanov, Ivaylo; Hasanov, Hasan
err分享
err收藏
Sustainable Combined Process for Improving Surface Integrity and Fatigue Strength of Heat-Treated 42CrMo4 Steel Shafts and Axles可持续组合工艺用于改善热处理42CrMo4钢轴和车轴的表面完整性与疲劳强度
errMetals 2025, Vol. 15, Page 755
IF2.5
err2025-08-24
err0
PREAI
errJordan Maximov; Galya Duncheva; Angel Anchev; Vladimir Dunchev; Kalin Anastasov; Mariana Ichkova
err分享
err收藏
Effects of Heat Treatment and Severe Surface Plastic Deformation on Mechanical Characteristics, Fatigue, and Wear of Cu-10Al-5Fe Bronze
errMATERIALS
IF3.2
err2022-12-13
err4
errOAAI
errMaximov, Jordan; Duncheva, Galya; Anchev, Angel; Dunchev, Vladimir; Argirov, Yaroslav; Todorov, Vladimir; Mechkarova, Tatyana
err分享
err收藏
Enhancement of the wear resistance of CuAl9Fe4 sliding bearing bushings via diamond burnishing
errWEAR
IF6.1
err2022-12-01
err18
PREAI
errDuncheva, G. V.; Maximov, J. T.; Anchev, A. P.; Dunchev, V. P.; Argirov, Y. B.; Kandeva-Ivanova, M.
err分享
err收藏
Effect of Diamond Burnishing on Fatigue Behaviour of AISI 304 Chromium-Nickel Austenitic Stainless Steel
errMATERIALS
IF3.2
err2022-07-07
err12
errOAAI
errMaximov, Jordan; Duncheva, Galya; Anchev, Angel; Dunchev, Vladimir; Argirov, Yaroslav
err分享
err收藏
Multi-objective optimization of the internal diamond burnishing process
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2021-09-26
err10
PREAI
errDuncheva, Galya, V; Maximov, Jordan T.; Anchev, Angel P.; Dunchev, Vladimir P.; Argirov, Yaroslav B.
err分享
err收藏
Effect of cyclic hardening on fatigue performance of slide burnished components made of low-alloy medium carbon steel循环硬化对低合金中碳钢制成的滑动抛光组件的乏力性能的影响
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2019-02-27
err20
PREAI
errMaximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Ganev, N.; Dunchev, V. P.
err分享
err收藏
Impact of slide diamond burnishing additional parameters on fatigue behaviour of 2024-T3 Al alloy
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2018-08-31
err25
errOAAI
errMaximov, Jordan T.; Anchev, Angel P.; Duncheva, Galya V.; Ganev, Nikolaj; Selimov, Kenan F.; Dunchev, Vladimir P.
err分享
err收藏
Effect of slide burnishing basic parameters on fatigue performance of 2024-T3 high-strength aluminium alloy
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2017-03-23
err24
PREAI
errMaximov, J. T.; Anchev, A. P.; Dunchev, V. P.; Ganev, N.; Duncheva, G. V.; Selimov, K. F.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
N
Nikolay Nedyalkov
H 指数: 26 · 论文数: 222
J
Jordan Maximov
H 指数: 22 · 论文数: 87
G
Galya Duncheva
H 指数: 21 · 论文数: 70
Т
Тatyana Koutzarova
H 指数: 18 · 论文数: 96
A
Angel Anchev
H 指数: 17 · 论文数: 79
查看更多