Taher Azdast - Publications, H-index & Citations

Taher Azdast

Urmia University

31H指数

119论文数

2.8K被引数

收录论文 49

发表时间

Effect of Recycled PET Microfibers and Nano-clay on the Mechanical Behavior of HDPE Hybrid Composites 回收PET微纤维和纳米黏土对HDPE混合复合材料力学行为的影响

Composites Part C: Open Access

IF7

2026-03-27

OAAI

Saeed Karimzadeh; Taher Azdast; Rezgar Hasanzadeh

Effect of Micrometric Waste Marble Dust as a Filler Material in Epoxy Composites on Morphological, Mechanical and Thermal Properties 微米级废大理石粉尘作为环氧树脂复合材料中的填充材料对形态，机械和热性能的影响

Polymers for Advanced Technologies

IF3.4

2026-01-26

PREAI

Hamoun Khatami; Taher Azdast; Ali Doniavi; Rezgar Hasanzadeh; Roberta Bertani

Optimized Mechanical Performances of Eco-Friendly Particulate Wood-Plastic Composites using Poplar, Cypress, and Platanaceae: Enhancing Tensile, Flexural, and Impact Strength 利用杨木、柏木和悬铃木科木材优化环保型颗粒木塑复合材料的力学性能：增强拉伸、弯曲和冲击强度

Journal of Hazardous Materials Advances

IF7.7

2026-01-07

OAAI

Yasir A. Abdullah; Taher Azdast; Ali Doniavi; Rezgar Hasanzadeh

Enhancing fatigue performance of FFF-3D printed PLA parts through surface roughness optimization via ironing process

MATERIALS TODAY COMMUNICATIONS

IF4.5

2026-01-01

OAAI

Rasouli, Asghar; Azdast, Taher; Hasanzadeh, Rezgar; Mihankhah, Peyman; Pourmahmoud, Hesamaddin

Improving dimensional stability and moisture resistance of injection-molded HDPE-based wood-plastic composites via microstructural insights and Taguchi optimization

POLYMER INTERNATIONAL

IF3.6

2025-12-01

PREAI

Abdullah, Yasir A.; Azdast, Taher; Doniavi, Ali; Hasanzadeh, Rezgar

Bioinspired Sandwich-Structured PLA Scaffolds via Additive Manufacturing: Optimizing Mechanical Properties and Printing Efficiency for Bone Tissue Engineering 基于生物启发的夹层结构PLA支架的增材制造：优化骨组织工程的机械性能和打印效率

Materials Today Communications

IF4.5

2025-11-11

OAAI

Peyman Mihankhah; Asghar Rasouli; Rezgar Hasanzadeh; Taher Azdast

Mechanical and morphological properties of hybrid polypropylene composites reinforced with a synergy of natural animal fibers and glass fiber 天然动物纤维与玻璃纤维协同增强的混杂聚丙烯复合材料的力学和形态性能

Polymer Bulletin

IF4

2025-09-18

PREAI

Peyman Mihankhah; Rezgar Hasanzadeh; Elshan Gheybollahzadeh; Taher Azdast

Thermochemical process of polypropylene plastic waste recovered from electric and electronic apparatuses-to-clean hydrogen energy 从电子电气设备中回收的聚丙烯塑料废物的热化学制清洁氢能过程

International Journal of Hydrogen Energy

IF8.3

2025-09-08

OAAI

Rezgar Hasanzadeh; Taher Azdast; Chul B. Park

Effects of teak wood and polycarbonate additives on the tensile, flexural and impact performances of HDPE-based wood-plastic composites 柚木和聚碳酸酯添加剂对HDPE基木塑复合材料拉伸、弯曲和冲击性能的影响

INTERNATIONAL WOOD PRODUCTS JOURNAL

IF0

2025-09-01

PREAI

Al-Arkawazi, Rasool R. K.; Azdast, Taher; Hasanzadeh, Rezgar

Structure-negative Poisson’s ratio analysis and optimization in a novel additively manufactured polymeric hybrid auxetic metastructure via 3D printing; finite element analysis; and machine learning 结构负泊松比分析与优化：一种新型增材制造聚合物混合负泊松比超材料结构，通过3D打印；有限元分析；以及机器学习

Smart Materials and Structures

IF3.8

2025-08-14

PREAI

Saman Jolaiy; Rezgar Hasanzadeh; Mehran Mojaver; Taher Azdast

Auxetic 3D printed metastructure stents for enhanced mechanical and structural performance and biocompatibility in coronary artery treatments 负泊松比3D打印超材料支架用于冠状动脉治疗中的增强机械和结构性能及生物相容性

Acta Biomaterialia

IF9.6

2025-06-26

PREAI

Rezgar Hasanzadeh; Saman Jolaiy; Mehran Mojaver; Taher Azdast; Chul B. Park

Sound-Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction 由熔融长丝制造技术3D打印的功能性渐变多孔结构聚乳酸零件的隔音性能，以实现有效降噪

MACROMOLECULAR MATERIALS AND ENGINEERING

IF4.6

2025-03-08

OAAI

Reza Navidpour; Taher Azdast; Rezgar Hasanzadeh; Milad Moradian; Peyman Mihankhah; Asghar Rasouli

Multi-objective optimization of coaxial cables with foamed LDPE/HDPE dielectric layers: Correlating process parameters with foam structure and impact on piezoelectric and electrical properties

POLYMER ENGINEERING AND SCIENCE

IF3.2

2024-12-30

PREAI

Rostami, Milad; Daryadel, Mahsa; Azdast, Taher; Moradian, Milad; Feizlou, Nima

A review of the state-of-the-art on thermal insulation performance of polymeric foams (vol 41, 101808, 2023)聚合物泡沫的隔热性能的最新技术综述 (第41卷，101808，2023)

THERMAL SCIENCE AND ENGINEERING PROGRESS

IF5.4

2024-10-01

PREAI

Hasanzadeh, Rezgar; Azdast, Taher; Lee, Patrick C.; Park, Chul B.

Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams

POLYMER ENGINEERING AND SCIENCE

IF3.2

2024-08-23

OAAI

Khaleghi, Sara; Azdast, Taher; Hasanzadeh, Rezgar; Park, Chul B.; Rasouli, Asghar

Acrylonitrile butadiene styrene/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding with optimized performance

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

IF3.4

2024-08-16

PREAI

Azerang, Bashar; Azdast, Taher; Doniavi, Ali; Hasanzadeh, Rezgar

Foaming-structural relationship of rotational molded nanocomposite foams: Box-Behnken response surface methodology implementation

POLYMERS FOR ADVANCED TECHNOLOGIES

IF3.4

2024-07-05

PREAI

Daryadel, Mahsa; Azdast, Taher

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

POLYMERS FOR ADVANCED TECHNOLOGIES

IF3.4

2024-02-02

PREAI

Mojaver, Mehran; Azdast, Taher; Hasanzadeh, Rezgar

Process-property relationship in polylactic acid composites reinforced by iron microparticles and 3D printed by fused filament fabrication 由铁微粒增强并通过熔丝制造3D打印的聚乳酸复合材料中的工艺-性能关系

POLYMER ENGINEERING AND SCIENCE

IF3.2

2023-11-07

OAAI

Hasanzadeh, Rezgar; Mihankhah, Peyman; Azdast, Taher; Bodaghi, Mahdi; Moradi, Mahmoud

Biocompatible tissue-engineered scaffold polymers for 3D printing and its application for 4D printing 用于3D打印的生物相容性组织工程支架聚合物及其在4D打印中的应用

CHEMICAL ENGINEERING JOURNAL

IF13.2

2023-11-01

PREAI

Hasanzadeh, Rezgar; Mihankhah, Peyman; Azdast, Taher; Rasouli, Asghar; Shamkhali, Mohadese; Park, Chul B.

研究方向