M.A. McCarthy - Publications, H-index & Citations

M.A. McCarthy

University of Limerick

42H指数

126论文数

5.3K被引数

收录论文 42

发表时间

Influence of adhesive spew geometry and load eccentricity angle on metal-composite bonded joints tested at quasi-static and dynamic loading rates

COMPOSITE STRUCTURES

IF7.1

2022-01-01

OAAI

Ramaswamy, Karthik; O'Higgins, Ronan M.; McCarthy, Michael A.; McCarthy, Conor T.

Influence of binder float length on the out-of-plane and axial impact performance of 3D woven composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2021-08-01

OAAI

Ralph, Calvin; Dahale, Monali; Neale, Geoffrey; Ramaswamy, Karthik; McCarthy, Michael; Yoo, Sanghyun; Toso, Nathalie; Kelly, John; McGarrigle, Cormac; Archer, Edward; Harkin-Jones, Eileen; McIlhagger, Alistair

An evaluation of the influence of manufacturing methods on interlocked aluminium-thermoplastic composite joint performance

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2021-04-01

OAAI

Ramaswamy, Karthik; O'Higgins, Ronan M.; Lyons, John; McCarthy, Michael A.; McCarthy, Conor T.

Influence of layup, stacking sequence and loading rate on energy absorption of tension-absorber joints

COMPOSITE STRUCTURES

IF7.1

2021-04-01

OAAI

Hassan, Jazib; O'Higgins, Ronan M.; Feser, Thomas; Waimer, Matthias; McCarthy, Conor T.; Toso, Nathalie; McCarthy, Michael A.

Quasi-static and dynamic performance of novel interlocked hybrid metal-composite joints

COMPOSITE STRUCTURES

IF7.1

2020-12-01

OAAI

Ramaswamy, Karthik; O'Higgins, Ronan M.; Corbett, Michael C.; McCarthy, Michael A.; McCarthy, Conor T.

Mesoscale modelling of extended bearing failure in tension-absorber joints

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2020-09-01

OAAI

Hassan, Jazib; O'Higgins, Ronan M.; McCarthy, Conor T.; Toso, Nathalie; McCarthy, Michael A.

Effects of transient dynamic loading on the energy absorption capability of composite bolted joints undergoing extended bearing failure

COMPOSITE STRUCTURES

IF7.1

2020-09-01

OAAI

Feser, Thomas; Hassan, Jazib; Waimer, Matthias; O'Higgins, Ronan M.; McCarthy, Conor T.; Toso, Nathalie; Voggenreiter, Heinz; McCarthy, Michael A.

Energy absorption capability of composite bolted joints undergoing extended bearing failure

COMPOSITE STRUCTURES

IF7.1

2020-04-01

OAAI

Hassan, Jazib; Feser, Thomas; O'Higgins, Ronan M.; Waimer, Matthias; McCarthy, Conor T.; Toso, Nathalie; Byrne, Michael E.; McCarthy, Michael A.

Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates

COMPOSITES PART B-ENGINEERING

IF14.2

2020-03-01

OAAI

Ramaswamy, Karthik; O'Higgins, Ronan M.; Kadiyala, Ajay Kumar; McCarthy, Michael A.; McCarthy, Conor T.

Potential routes to stronger carbon nanotube fibres via carbon ion irradiation and deposition

CARBON

IF11.6

2016-01-01

PREAI

Mulvihill, Daniel M.; O'Brien, Nathan P.; Curtin, William A.; McCarthy, Michael A.

Finite element analysis of catastrophic failure of dynamically-loaded countersunk composite fuselage joints

COMPOSITE STRUCTURES

IF7.1

2015-12-01

OAAI

Egan, B.; McCarthy, M. A.; Frizzell, R. M.; McCarthy, C. T.

A three dimensional implicit finite element damage model and its application to single-lap multi-bolt composite joints with variable clearance

COMPOSITE STRUCTURES

IF7.1

2015-11-01

PREAI

Zhou, Yinhua; Nezhad, Hamed Yazdani; Hou, Chi; Wan, Xiaopeng; McCarthy, C. T.; McCarthy, M. A.

Non local normal modes in nanoscale dynamical systems

MECHANICAL SYSTEMS AND SIGNAL PROCESSING

IF8.9

2015-08-01

PREAI

Adhikari, S.; Gilchrist, D.; Murmu, T.; McCarthy, M. A.

Mechanical characterisation of carbon fibre-PEEK manufactured by laser-assisted automated-tape-placement and autoclave

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2015-02-01

193

PREAI

Comer, A. J.; Ray, D.; Obande, W. O.; Jones, D.; Lyons, J.; Rosca, I.; O'Higgins, R. M.; McCarthy, M. A.

A study of intra-laminar damage in double-lap, multi-bolt, composite joints with variable clearance using continuum damage mechanics

COMPOSITE STRUCTURES

IF7.1

2014-09-01

PREAI

Zhou, Yinhua; Yazdani-Nezhad, Hamed; McCarthy, M. A.; Wan, Xiaopeng; McCarthy, Conor

Numerical method to control high levels of damage growth using an implicit finite element solver applied to notched cross-ply laminates

COMPOSITE STRUCTURES

IF7.1

2014-04-01

PREAI

Frizzell, R. M.; McCarthy, M. A.; McCarthy, C. T.

Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis

COMPOSITE STRUCTURES

IF7.1

2014-02-01

PREAI

Egan, B.; McCarthy, M. A.; Frizzell, R. M.; Gray, P. J.; McCarthy, C. T.

Pullout of rough multiwall carbon nanotubes: A parametric study

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2014-01-01

PREAI

Byrne, E. M.; McCarthy, M. A.; Curtin, W. A.

Static and high-rate loading of single and multi-bolt carbon-epoxy aircraft fuselage joints

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2013-10-01

PREAI

Egan, B.; McCarthy, C. T.; McCarthy, M. A.; Gray, P. J.; O'Higgins, R. M.

In-plane magnetic field affected transverse vibration of embedded single-layer graphene sheets using equivalent nonlocal elasticity approach

COMPOSITE STRUCTURES

IF7.1

2013-02-01

130

PREAI

Murmu, T.; McCarthy, M. A.; Adhikari, S.

研究方向