logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
K

Kee‐Ahn Lee

inha university

38H指数
367论文数
5.3K被引数
收录论文 133
发表时间
logo
Impact of δ-Ferrite Formed during CMT-WAAM on the Hydrogen Embrittlement Behavior of 316L Stainless Steelδ铁素体在CMT-WAAM过程中形成对316L不锈钢氢脆行为的影响
errJournal of Materials Research and Technology
IF6.6
err2026-05-28
err0
errOAAI
errYuanjiu Huang; Chan Kyu Kim; Sang-woo Song; Jin-Yoo Suh; Kee-Ahn Lee
err分享
err收藏
Topology-driven compressive behavior of Inconel 718 lattice structures with Z-strut reinforcement fabricated by laser powder bed fusion激光粉末床熔融制造的具有Z形杆增强的Inconel 718点阵结构的拓扑驱动压缩行为
errJournal of Materials Research and Technology
IF6.6
err2026-04-28
err0
errOAAI
errTae-Hoon Kang; So-Yeon Park; Holder Hyer; Dong-Hoon Yang; Yongho Sohn; HangJin Jo; Namhyeong Kim; Kee-Ahn Lee
err分享
err收藏
Annealing-Induced Evolution of Band-Like B2 Phase in Hot-Rolled Fe–16Mn–10Al–5Ni–0.86C Steel and Its Role in Strength-Ductility Balance退火诱导的类B2相在热轧Fe–16Mn–10Al–5Ni–0.86C钢中的演化及其在强度-塑性平衡中的作用
errMetals and Materials International
IF4
err2026-03-17
err0
PREAI
errYuanjiu Huang; Tae-Hoon Kang; Han-Soo Kim; Kee-Ahn Lee
err分享
err收藏
Fabrication, Microstructure, and High-Temperature Mechanical Properties of a Novel Al-Si-Mg Based Composite Reinforced with Cu-Mn Binary Phase and Submicron Dispersoid制备、微观结构及高温力学性能：一种以Cu-Mn二元相和亚微米分散相增强的新型Al-Si-Mg基复合材料
errMetals
IF2.5
err2026-03-03
err0
errOAAI
errKyu-Sik Kim; Abdul Wahid Shah; Jin-Pyung Kim; Si-Young Sung; Kee-Ahn Lee; Min-Su Jeon
err分享
err收藏
Enhanced strength and microstructural homogenization in material extrusion copper via HIP assisted by uniform rapid quenching通过均匀快速冷却辅助热等静压的材料挤压铜的强度增强和微观结构均匀化
errmaterials science and engineering: a
IF0
err2026-02-23
err0
PREAI
errNa-Yoon Yee; So-Yeon Park; Mathias Englund; Kee-Ahn Lee
err分享
err收藏
Effect of Post-heat Treatment on the Load-Dependent Wear Mechanisms of AISI D2 Tool Steel Manufactured by Laser Direct Energy Deposition后热处理对激光直接能量沉积制造的AISI D2工具钢的载荷相关磨损机制的影响
errJournal of Thermal Spray Technology
IF3.3
err2026-01-29
err0
PREAI
errJung-Hyun Park; Kyu-Sik Kim; Yong-Mo Koo; Jong-Bae Jeon; Kee-Ahn Lee
err分享
err收藏
Superior Hydrogen Embrittlement Resistance of WAAM Ti-6Al-4V Compared to Wrought Alloy under Gaseous Hydrogen Charging与锻造合金在气体氢充氢条件下相比，WAAM Ti-6Al-4V具有更优的氢致脆性抗力。
errCorrosion Science
IF8.5
err2026-01-05
err0
PREAI
errSoobin Kim; Yuanjiu Huang; Dong-Hyuck Kam; Jin-Yoo Suh; Kee-Ahn Lee
err分享
err收藏
Process-driven ω-phase precipitation and mechanical biofunctionality of low-modulus Ti-40Nb alloy fabricated by laser powder bed fusion基于激光粉末床熔融制备的低模量Ti-40Nb合金的过程驱动的ω相沉淀及其机械生物学功能
errJournal of Alloys and Compounds
IF6.3
err2025-12-28
err0
PREAI
errNa-Yoon Yee; So-Yeon Park; Dong-Woo Suh; Seok Su Sohn; Kee-Ahn Lee
err分享
err收藏
Influence of Sr Modifier in Microstructure and Tensile Properties of AlSi10Mg Alloy Fabricated by Laser Powder Bed Fusion ProcessSr改性剂对激光粉末床熔融工艺制备的AlSi10Mg合金微观结构及拉伸性能的影响
errMetals and Materials International
IF4
err2025-11-21
err0
PREAI
errR. Kreethi; So-Yeon Park; Mincheol Kang; Seung-Min Park; Kee-Ahn Lee
err分享
err收藏
Tailoring deformation mechanism via Ti, V, Mo microalloying in L-PBF fabricated Fe50Mn30Co10Cr10 multi-principal element alloys for enhanced strength–ductility synergy at room and cryogenic temperatures通过Ti、V、Mo微合金化调控L-PBF制备的Fe50Mn30Co10Cr10多主元合金的变形机制，以提升其在室温和低温下的强度-塑性协同效应
errIntermetallics
IF4.8
err2025-11-14
err0
PREAI
errSoobin Kim; So-Yeon Park; Young-Kyun Kim; Hyoung Seop Kim; Kee-Ahn Lee
err分享
err收藏
Fe-36Ni Invar alloy with enhanced strength and low thermal expansion at cryogenic temperatures via laser powder bed fusion通过激光粉末床熔融制备的高强度、低温低热膨胀Fe-36Ni殷钢合金
errMaterials Science and Engineering: A
IF0
err2025-11-12
err0
PREAI
errYong-Hoon Cho; So-Yeon Park; Young-Kyun Kim; Junghwan Kim; Jeongho Han; Dong-Woo Suh; Kee-Ahn Lee
err分享
err收藏
Effect of Unit Cell Size on the Compressive Deformation Behavior of Inconel 718 Lattice Structures Fabricated by Laser Powder Bed Fusion Process晶胞尺寸对激光粉末床熔融法制备的Inconel 718晶格结构压缩变形行为的影响
errKOREAN JOURNAL OF METALS AND MATERIALS
IF1.4
err2025-11-01
err0
errOAAI
errHyer, Holden; Sohn, Yongho; Kang, Tae-Hoon; Lee, Kee-Ahn
err分享
err收藏
B2 phase controlling method of austenitic Fe–16Mn–10Al–5Ni–0.86C lightweight steel using laser powder bed fusion process and its microstructure and mechanical properties奥氏体Fe–16Mn–10Al–5Ni–0.86C轻质钢在激光粉末床熔融过程中的B2相控制方法及其微观结构与力学性能
errJournal of Materials Research and Technology
IF6.6
err2025-10-16
err0
errOAAI
errTae-Hoon Kang; Yuanjiu Huang; Amol B. Kale; Han-Soo Kim; Kee-Ahn Lee
err分享
err收藏
Interlayer integrity and mechanical anisotropy of WAAM-processed Al-Mg alloys层间完整性及WAAM工艺处理Al-Mg合金的力学各向异性
errJournal of Alloys and Compounds
IF6.3
err2025-10-03
err0
PREAI
errMin-Su Jeon; Yuanjiu Huang; Dong-Hyuck Kam; Min-Sun Oh; Kee-Ahn Lee
err分享
err收藏
High-Temperature, Time-Dependent Deformation and Densification of Unique Multi-Sheet Stacked Ni-Cr-Al Superalloy Foam高温、时间依赖性变形及独特多片层堆叠Ni-Cr-Al超级合金泡沫的致密化
errKOREAN JOURNAL OF METALS AND MATERIALS
IF1.4
err2025-10-01
err0
errOAAI
errKim, Kyu-Sik; Kang, Tae-Hoon; Park, Man-Ho; Yun, Jung-Yeul; Lee, Kee-Ahn
err分享
err收藏
Fe-Cr-Mo-B-Si-C Metamorphic Alloy Coating with Excellent Wear Resistance Fabricated via High-Velocity Oxygen Fuel Thermal Spray ProcessFe-Cr-Mo-B-Si-C变形合金涂层，具有优异的耐磨性，通过高速氧燃料热喷涂工艺制备
errMaterials 2025, Vol. 18, Page 4241
IF0
err2025-09-11
err0
errOAAI
errYu-Jin Hwang; Yong-Hoon Cho; Gi-Su Ham; Choongnyun Paul Kim; Kee-Ahn Lee
err分享
err收藏
Ti-induced microstructural evolution and mechanical enhancement in Al7075 alloy fabricated by laser powder bed fusionTi诱导的微观结构演变及激光粉末床熔融制备的Al7075合金的力学性能增强
errJournal of Alloys and Compounds
IF6.3
err2025-09-01
err0
PREAI
errSoobin Kim; Dong-Min Jang; Ma-Tae Lee; Jungho Choe; Kyung Tae Kim; Byeong-Joo Lee; Kee-Ahn Lee
err分享
err收藏
Effect of heat treatment on microstructure and corrosion behavior of 17-4 PH stainless steel fabricated via metal material extrusion additive manufacturing热处理对通过金属材料挤出增材制造制备的17-4 PH不锈钢微观结构及腐蚀行为的影响
errJournal of Materials Research and Technology
IF6.6
err2025-08-20
err0
errOAAI
errYong-Hoon Cho; So-Yeon Park; Ju-Yong Kim; Jung-Yeul Yun; Kee-Ahn Lee
err分享
err收藏
Fabrication, microstructure, and mechanical properties of Fe-16Mn-10Al-5Ni-0.86C (wt.%) lightweight steel manufactured by directed energy deposition采用定向能量沉积制造的Fe-16Mn-10Al-5Ni-0.86C（wt.%）轻质钢的制备、微观结构与力学性能
errmaterials science materials in engineering
IF0
err2025-08-11
err0
PREAI
errYuanjiu Huang; Amol B. Kale; Tae-Hoon Kang; Han-Soo Kim; Kee-Ahn Lee
err分享
err收藏
A novel approach to fabricating SUS 316L steel foam using material extrusion additive manufacturing technology一种采用材料挤出增材制造技术制备SUS 316L钢泡沫的新方法
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-05-01
err0
errOAAI
errSong, Noh-Geon; Park, So-Yeon; Yun, Jung-Yeul; Kim, Ju-Yong; Lee, Kee-Ahn
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
Hyoung Seop Kim 封面图
Hyoung Seop Kim (Hyoung Seop Kim)
H 指数: 99 · 论文数: 1.8K
D
David N. Seidman
H 指数: 82 · 论文数: 654
B
Byeong‐Joo Lee
H 指数: 76 · 论文数: 446
C
Chan Hee Park
H 指数: 71 · 论文数: 604
S
Sung Soo Park
H 指数: 66 · 论文数: 1.2K
查看更多