Michael S. Kesler - Publications, H-index & Citations

Michael S. Kesler

Oak Ridge National Laboratory

17H指数

69论文数

943被引数

收录论文 25

发表时间

Effect of magneto-mechanical synergism in the process-structure correlation in Fe-C alloys: A phase-field modeling approach Fe-C合金中过程-结构相关性过程中磁-机械协同效应的影响：一种相场建模方法

Acta Materialia

IF9.3

2026-03-14

PREAI

Soumya Bandyopadhyay; Sourav Chatterjee; Dallas R. Trinkle; Richard G. Hennig; Victoria Miller; Michael S. Kesler; Michael R. Tonks

Inverse design of hypoeutectoid pearlite steel microstructures using a deep learning and genetic algorithm optimization framework 基于深度学习与遗传算法优化框架的亚共析珠光体钢微观结构逆向设计

Computational Materials Science

IF3.3

2026-03-03

PREAI

Ravi Kiran Bollineni; Zhifei Deng; Michael S. Kesler; Michael R. Tonks; Ling Li; Reza Mirzaeifar

Effects of magnetic field assisted heat treatment on the microstructure and mechanical properties of Fe-0.63 %C alloy 磁场辅助热处理对Fe-0.63%C合金微观结构和力学性能的影响

Materials Science and Engineering: A

IF0

2025-11-22

PREAI

Ravi Kiran Bollineni; Michael J. Thompson; Megan E. Hurley; Victoria M. Miller; Michael R. Tonks; Ling Li; Reza Mirzaeifar; Michael S. Kesler

Elucidating grain boundary energy minimization mechanisms in textured Ca-doped alumina with inclination-dependent Monte Carlo Potts simulations 用倾斜相关的蒙特卡洛波茨模拟阐明纹理化的Ca掺杂氧化铝中的晶界能量最小化机制

ACTA MATERIALIA

IF9.3

2025-02-01

OAAI

Yang, Lin; Conry, Bryan; Hall, Hailey E.; Harley, Joel B.; Kesler, Michael S.; Tonks, Michael R.; Krause, Amanda R.

Hardenability and microstructural evolution of a precipitation strengthened Ni50Ti21Hf25Al4 alloy

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-01

PREAI

Gallo, Flavia da Cruz; Yang, Yang; Hershkovitz, Eitan; Kapoor, Monica; Henderson, Hunter B.; Kesler, Michael S.; Kim, Honggyu; Manuel, Michele, V

Magnetic nanoparticle-induced sorbent regeneration for direct air capture

AICHE JOURNAL

IF4

2024-06-03

PREAI

Li, Kai; Kesler, Michael S.; McGuire, Michael A.; Zhang, Mingkan; Aytug, Tolga; Jiang, Huixin; Sholl, David S.; Lara-Curzio, Edgar; Thompson, Michael J.; Li, Yanfei; Tener, Zack P.; Nawaz, Kashif

The evolution of grain boundary energy in textured and untextured Ca-doped alumina during grain growth 晶粒生长过程中晶界能量在纹理和非纹理的Ca掺杂氧化铝中的演变

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2023-08-28

OAAI

Conry, Bryan; Kole, Molly; Burnett, W. Ryan; Harley, Joel B.; Tonks, Michael R.; Kesler, Michael S.; Krause, Amanda R.

Investigating the failure behavior of cast Al-11Ce-0.4Mg alloys using in-situ scanning electron microscopy tensile testing

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-06-01

OAAI

Lane, Ryan J.; Kesler, Michael S.; Nawaz, Kashif; Mirzaeifar, Reza

Engineering grain boundary anisotropy to elucidate grain growth behavior in alumina*工程晶界各向异性以阐明氧化铝中的晶粒生长行为 *

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2022-10-01

OAAI

Conry, Bryan; Harley, Joel B.; Tonks, Michael R.; Kesler, Michael S.; Krause, Amanda R.

A novel physics-regularized interpretable machine learning model for grain growth 一种新的用于晶粒生长的物理正则化可解释机器学习模型

MATERIALS & DESIGN

IF7.9

2022-10-01

OAAI

Yan, Weishi; Melville, Joseph; Yadav, Vishal; Everett, Kristien; Yang, Lin; Kesler, Michael S.; Krause, Amanda R.; Tonks, Michael R.; Harley, Joel B.

Experiment and non-local crystal plasticity finite element study of nanoindentation on Al-8Ce-10Mg alloy

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2021-12-01

OAAI

Cheng, Jiahao; Lane, Ryan; Kesler, Michael S.; Brechtl, Jamieson; Hu, Xiaohua; Mirzaeifar, Reza; Rios, Orlando; Momen, Ayyoub M.; Nawaz, Kashif

A rapid heating and high magnetic field thermal analysis technique 一种快速加热强磁场热分析技术

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2021-09-05

OAAI

Kesler, Michael S.; McGuire, Michael A.; Conner, Ben; Rios, Orlando; Murphy, Bart; Carter, William; Henderson, Hunter B.; Ludtka, Gerard M.; Kisner, Roger A.

Developing an experimental-computational framework to investigate the deformation mechanisms and mechanical properties of Al-8Ce-10Mg alloys at micro and macroscales

MATERIALS TODAY COMMUNICATIONS

IF4.5

2021-09-01

OAAI

Lane, Ryan J.; Momen, Ayyoub M.; Kesler, Michael S.; Brechtl, Jamieson; Rios, Orlando; Nawaz, Kashif; Mirzaeifar, Reza

Liquid direct reactive interface printing of structural aluminum alloys

APPLIED MATERIALS TODAY

IF6.9

2018-12-01

OAAI

Kesler, Michael S.; Neveau, Max L.; Carter, William G.; Henderson, Hunter B.; Sims, Zachary C.; Weiss, David; Lid, Tian T.; McCall, Scott K.; Glicksmane, Martin E.; Rios, Orlando

Repairing large cracks and reversing fatigue damage in structural metals

APPLIED MATERIALS TODAY

IF6.9

2018-12-01

OAAI

Fisher, Charles R.; Henderson, Hunter B.; Kesler, Michael S.; Zhu, Pingping; Bean, Glenn E.; Wright, M. Clara; Newman, John A.; Brinson, L. Catherine; Figueroa, Oscar, III; Manuel, Michele, V

Tuning magnetocrystalline anisotropy by cobalt alloying in hexagonal Fe3Ge1 六方Fe3Ge1中钴合金化调节磁晶各向异性

SCIENTIFIC REPORTS

IF3.9

2018-09-21

OAAI

McGuire, Michael A.; Shanavas, K., V; Kesler, Michael S.; Parker, David S.

Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing

ADDITIVE MANUFACTURING

IF11.1

2018-05-01

OAAI

Li, Ling; Jones, Kodey; Sales, Brian; Pries, Jason L.; Nlebedim, I. C.; Jin, Ke; Bei, Hongbin; Post, Brian K.; Kesler, Michael S.; Rios, Orlando; Kunc, Vlastimil; Fredette, Robert; Ormerod, John; Williams, Aaron; Lograsso, Thomas A.; Paranthaman, M. Parans

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2018-04-01

OAAI

Henderson, Hunter B.; Ramaswamy, Vidhya; Wilson-Heid, Alexander E.; Kesler, Michael S.; Allen, Josephine B.; Manuel, Michele V.

Effect of microstructural parameters on the mechanical behavior of TiAlNb(Cr,Mo) alloys with γ plus σ microstructure at ambient temperature

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2017-02-01

OAAI

Kesler, Michael S.; Goyel, Sonalika; Ebrahimi, Fereshteh; Manuel, Michele V.