logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
V

Volker Schulze

karlsruhe institute of technology

38H指数
571论文数
7.3K被引数
收录论文 67
发表时间
logo
Towards real-time prediction of thermal history and hardness in laser powder bed fusion using deep learning利用深度学习对激光粉末床熔融过程中的热历史和硬度进行实时预测
errComputational Materials Science
IF3.3
err2026-08-28
err0
errOAAI
errPhilipp Schüßler; Volker Schulze; Stefan Dietrich
err分享
err收藏
Towards data-driven reprocessing: Multisensory process observation and hardness modeling in high-speed directed energy deposition面向数据驱动的再处理：高速定向能量沉积中的多感官过程观测与硬度建模
errJournal of Manufacturing Systems
IF14.2
err2026-07-30
err0
PREAI
errHelena Wexel; Mehdi Khabou; Volker Schulze; Stefan Dietrich; Frederik Zanger
err分享
err收藏
A Microstructure-based dynamic recrystallization model for dry machining of AISI 4140 with in-situ kinematic and thermal calibration and validation基于微观结构的AISI 4140干切削动态再结晶模型及其原位运动学和热校准与验证
errCIRP Annals
IF0
err2026-04-30
err0
PREAI
errJulius Schoop; German Gonzalez; Avery Hartley; Volker Schulze; I.S. Jawahir
err分享
err收藏
Grey-box model–integrating tribology descriptor for tool wear prediction in milling基于灰箱模型及摩擦学描述符的铣削刀具磨损预测
errCIRP Annals
IF0
err2026-04-26
err0
errOAAI
errAmirmohammad Jamali; Amod Kashyap; Finn Rümenapf; Nelson Filipe Lopes Dias; Wolfgang Tillmann; Johannes Schneider; Michael Stüber; Volker Schulze
err分享
err收藏
Investigation of the formation and reduction of hydrogen porosity during laser welding of additively manufactured AlSi10Mg parts
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-01-29
err0
errOAAI
errSteffen Kramer; Victor Lubkowitz; Michael Haas; Johannes Michel; Christoph Spurk; Alexander Olowinsky; Guilherme Abreu Faria; Michael Jarwitz; Thomas Graf; Volker Schulze; Frederik Zanger
err分享
err收藏
Process stability and limits of agglomerating 316L powder in laser powder bed fusion of metals316L粉末在金属激光粉末床熔融过程中的稳定性与极限
errMaterials & Design
IF7.9
err2025-11-10
err0
errOAAI
errKai Drechsel; Volker Schulze; Frederik Zanger
err分享
err收藏
Experimental and multiscale simulation analysis of the lubricant penetration in gear skiving
errPRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT
IF1.6
err2025-10-01
err0
errOAAI
errGarcia, Edder J.; Sauer, Florian; Haber, Matthias; Mukherjee, Amartya; Falk, Kerstin; Schwitzke, Corina; Bauer, Hans-Jorg; Moseler, Michael; Schulze, Volker
err分享
err收藏
Grey-box modelling for tool wear prediction in milling: Fusion of finite element insights, time-resolved cutting signals and metaheuristic feature selection铣削中刀具磨损预测的灰箱建模：有限元洞察、时序切削信号与元启发式特征选择的融合
errWear
IF6.1
err2025-08-16
err0
errOAAI
errAmirmohammad Jamali; Amod Kashyap; Johannes Schneider; Michael Stueber; Volker Schulze
err分享
err收藏
Impact of different pore types on the tensile and fatigue properties of AlSi10Mg parts produced by laser powder bed fusion不同孔隙类型对激光粉末床熔融制备的AlSi10Mg零件的拉伸和疲劳性能的影响
errProgress in Additive Manufacturing
IF5.4
err2025-08-06
err0
errOAAI
errSteffen Kramer; Helena Wexel; Anisa Purwitasari; Michael Jarwitz; Volker Schulze; Frederik Zanger
err分享
err收藏
Insights into the metal cutting contact zone through automation and multivariate regression modelling under the framework of gear skiving在齿轮精滚削框架下，通过自动化和多变量回归建模对金属切削接触区进行深入分析。
errSIMULATION MODELLING PRACTICE AND THEORY
IF4.6
err2025-07-01
err0
errOAAI
errSauer, Florian; Mukherjee, Amartya; Schulze, Volker
err分享
err收藏
Formation and occurrence of subsurface damage mechanism with the analysis of optimal machining strategy when milling different fibre matrix combination of unidirectional FRP's
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2025-04-01
err0
PREAI
errBoehland, Felicitas; Fatan, Remus Tutunea; Schulze, Volker
err分享
err收藏
Influence of base plate preheating temperature on fatigue strength of AISI 4140 manufactured by laser powder bed fusion基板预热温度对激光粉末床熔融AISI 4140乏力强度的影响
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-03-01
err0
errOAAI
errSchuessler, Philipp; Dollhofer, Benjamin; Kraemer, Christian; Englert, Lukas; Hinrichs, Frauke; Schulze, Volker; Dietrich, Stefan
err分享
err收藏
Investigation of the Influence of Manufacturing on Filament Production and Its Impact on Additive Manufactured Structures研究制造对丝材生产的影响及其对增材制造结构的影响
errPOLYMERS
IF4.9
err2025-02-28
err0
errOAAI
errRefat, Mohamed; Maertens, Robert; Weiss, Patrick; Henning, Frank; Schulze, Volker; Liebig, Wilfried V.
err分享
err收藏
Advanced eddy-current electromagnetic measurements for real-time non-destructive metal monitoring
errMEASUREMENT
IF5.6
err2025-01-01
err0
PREAI
errKanoun, Olfa; Walther, Frank; Muenstermann, Sebastian; Schulze, Volker; Singh, Surinder
err分享
err收藏
Controlling the mechanical properties of laser powder bed fusion manufactured AlSi10Mg using optimized oscillating scan paths
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-12-19
err0
errOAAI
errMeyer, Samuel; Englert, Lukas; Schuessler, Philipp; Schulze, Volker; Dietrich, Stefan
err分享
err收藏
Generalised and automated method for surface analysis of roughness and subsurface porosity using micro-computed tomography使用微计算机断层扫描对粗糙度和地下孔隙率进行表面分析的通用和自动方法
errNDT & E INTERNATIONAL
IF4.5
err2024-09-01
err0
errOAAI
errEnglert, Lukas; Schulze, Volker; Dietrich, Stefan
err分享
err收藏
Optimization of the layer quality by TiC nanoparticles in the ultrasonic excited recoating process with non-spreadable AlSi10Mg matrix B4C particle-powder composites for powder bed based additive manufacturing
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-09-01
err1
errOAAI
errLubkowitz, Victor; Drechsel, Kai; Schulze, Volker; Zanger, Frederik
err分享
err收藏
Analysis of subsurface damage during milling of CFRP due to spatial fibre cutting angle, tool geometry and cutting parameters
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2024-07-01
err1
errOAAI
errBoehland, Felicitas; Hilligardt, Andreas; Schulze, Volker
err分享
err收藏
Non-Circular-Rotary-Turning process for manufacturing parts with non-circular contours
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err0
errOAAI
errArndt, Tassilo; Schulze, Volker
err分享
err收藏
Surface conditioning in cutting and abrasive processes
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err0
errOAAI
errSchulze, Volker; Aurich, Jan; Jawahir, I. S.; Karpuschewski, Bernhard; Yan, Jiwang
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
李晴 封面图
李晴 (Qing Li)
H 指数: 115 · 论文数: 1.5K
I
I.S. Jawahir
H 指数: 66 · 论文数: 308
D
David Dornfeld
H 指数: 64 · 论文数: 422
A
A. Erman Tekkaya
H 指数: 58 · 论文数: 783
S
Shreyes N. Melkote
H 指数: 55 · 论文数: 304
查看更多