logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jung‐Wook Cho

pohang university of science & technology (postech)

31H指数
140论文数
3.0K被引数
收录论文 63
发表时间
logo
Development of an Environmentally Benign Mold Flux for Continuous Steel Casting: Heat Transfer Optimization by Dispersed Iron Microparticles开发一种环境友好型连铸保护渣：通过分散铁微颗粒优化传热
errJournal of Sustainable Metallurgy
IF3.2
err2026-08-01
err0
PREAI
errHyun, Sung-Hee; Cho, Jung-Wook
err分享
err收藏
Enhancing high-temperature stability of Fe–12Cr–6Al–1Ti–0.25Y2O3 via in-situ nitride and oxide synthesis in laser powder bed fusion通过激光粉末床熔融原位合成氮化物和氧化物来增强Fe–12Cr–6Al–6Ti–0.25Y2O3的高温稳定性
errMaterials & Design
IF7.9
err2026-02-11
err0
errOAAI
errOmer Cakmak; Hwasung Yeom; Jung-Wook Cho
err分享
err收藏
Solidification microstructure and elemental segregation in laser-based powder bed fusion additively manufactured IN738LC Ni-based superalloy
errMaterials & Design
IF7.9
err2026-01-27
err0
errOAAI
errShailendra Kumar Verma; Soung Yeoul Ahn; Sushil Kumar; Gaon Yu; Hyeonseok Cho; Alireza Zargaran; Gitaek Lee; Sang Guk Jeong; Man Jae Sagong; Bon Woo Koo; Seung Hoon Lee; Jung-Wook Cho; Hyoung Seop Kim; Kyoungdoc Kim
err分享
err收藏
Effect of Zr addition on microstructural evolution and mechanical properties of deformed and annealed Cu-Fe alloysZr添加对变形和退火Cu-Fe合金微观结构演变及力学性能的影响
errJournal of Materials Research and Technology
IF6.6
err2025-09-16
err0
errOAAI
errHojoon Moon; Jung-Wook Cho
err分享
err收藏
Effects of in-situ synthesized nitride and oxide precipitates on the room temperature and high temperature mechanical properties of laser powder bed fusion Fe-12Cr-6Al原位合成的氮化物和氧化物析出物对激光粉末床熔融Fe-12Cr-6Al在室温和高温力学性能的影响
errMaterials Characterization
IF5.5
err2025-07-07
err0
PREAI
errOmer Cakmak; Hyojin Park; Hwasung Yeom; Hyoung Seop Kim; Jung-Wook Cho
err分享
err收藏
How the hard domains behave in hetero-deformation: In-situ synchrotron X-ray diffraction study with finite element method simulation硬域在异质变形中的行为: 有限元方法模拟的原位同步加速器x射线衍射研究
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-04-01
err0
PREAI
errGu, Gang Hee; Kim, Yongju; Lee, Jae Heung; Yi, Sangbong; Maawad, Emad; Ha, Changwan; Seo, Min Hong; Cho, Jungwook; Kwon, Hyeonseok; Kim, Hyoung Seop
err分享
err收藏
Structural investigation of alkali aluminoborosilicate glass containing MoO3 for vitrification of nuclear waste含MoO3的碱金属铝硼硅酸盐玻璃用于核废料玻璃化的结构研究
errJOURNAL OF NON-CRYSTALLINE SOLIDS
IF3.5
err2025-03-01
err0
PREAI
errKim, Seon-jin; Yeo, Tae-min; Hyun, Sung-hee; Lee, Jisun; Cho, Jung-wook
err分享
err收藏
Effect of laser power during laser powder bed fusion on microstructure of joining interface between Tungsten and AISI 316L steel激光粉末床熔化过程中激光功率对钨与AISI 316L钢连接界面组织的影响
errADDITIVE MANUFACTURING LETTERS
IF4.7
err2024-12-01
err0
PREAI
errLee, Seung-Hoon; Koo, Ji-Hoe; Cakmak, Omer; Cho, Jung-Wook
err分享
err收藏
In-situ synthesis of Yttria-based precipitates and their effects on Fe12Cr6Al in laser powder bed fusion激光粉末床熔融中氧化钇基沉淀物的原位合成及其对Fe12Cr6Al的影响
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-11-01
err0
errOAAI
errCakmak, Omer; Yeom, Hwasung; Cho, Jung-Wook
err分享
err收藏
Microstructural investigation of nanocrystalline Nd-Fe-B magnets fabricated by laser powder bed fusion
errMATERIALS CHARACTERIZATION
IF5.5
err2024-10-01
err1
PREAI
errKim, Ho-Jeong; Jang, Ye Ryeong; Lee, Hyun-Sook; Cho, Jung-Wook; Jang, Taesuk; Eo, Du-Rim; Lee, Wooyoung
err分享
err收藏
Effect of process atmosphere on microstructure, melt pool, texture, precipitate characteristics, and mechanical properties of laser powder bed fusion Fe-12Cr-6Al工艺气氛对激光粉末床熔融Fe-12Cr-6Al微观结构、熔池、织构、沉淀特征及力学性能的影响
errADDITIVE MANUFACTURING LETTERS
IF4.7
err2024-07-01
err2
errOAAI
errCakmak, Omer; Chung, Seong Gyu; Lee, Seung-Hoon; Koo, Jihoe; Yeom, Hwasung; Cho, Jung-Wook
err分享
err收藏
Size matters: Exploring part size effects on microstructure, defects, and mechanical property in optimized laser powder bed fusion (L-PBF) additive manufacturing
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-06-01
err3
PREAI
errAhn, Soung Yeoul; Jeong, Sang Guk; Sagong, Man Jae; Lee, Gitaek; Kim, Eun Seong; Park, Hyojin; Cho, Jung-Wook; Kim, Jung Gi; Kim, Hyoung Seop
err分享
err收藏
Deciphering the Mixed-Alkali effect in supercooled oxide liquids: Results from dynamic and thermodynamic measurements
errACTA MATERIALIA
IF9.3
err2024-05-01
err3
PREAI
errYeo, Tae-min; Cho, Jung-Wook; Sen, Sabyasachi
err分享
err收藏
In-situ synthesis of nitrides and oxides through controlling reactive gas atmosphere during laser-powder bed fusion of Fe-12Cr-6Al通过在Fe-12Cr-6Al的激光粉末床熔融过程中控制反应性气体气氛来原位合成氮化物和氧化物
errMATERIALS & DESIGN
IF7.9
err2024-04-01
err3
errOAAI
errCakmak, Omer; Lee, Seung-Hoon; Chung, Seong Gyu; Eo, Du-Rim; Yeom, Hwasung; Cho, Jung-Wook
err分享
err收藏
In-situ synthesis of TiN and its effects on Fe-12Cr-6Al in laser powder bed fusion
errADDITIVE MANUFACTURING
IF11.1
err2024-03-01
err2
PREAI
errCakmak, Omer; Yeom, Hwasung; Cho, Jung-Wook
err分享
err收藏
Strong resistance to Zn-assisted liquid metal embrittlement of austenitic-TWIP/martensitic-HSLA multi-layered steel sheets additively manufactured by laser cladding
errACTA MATERIALIA
IF9.3
err2023-10-01
err4
PREAI
errHong, Seok-Hyun; Eo, Du-Rim; Lee, Sunghak; Cho, Jung-Wook; Kim, Sung-Joon
err分享
err收藏
Effects of AlN addition into AISI 316L on melt pool stability and microstructural evolution during laser powder bed fusion
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-08-01
err10
PREAI
errLee, Seung Hoon; Chung, Seong Gyu; Kim, Hyoung Seop; Cho, Jung-Wook
err分享
err收藏
Effect of cerium on the primary carbides and inclusions in electroslag remelted M35 high speed steel
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-05-01
err16
errOAAI
errZheng, Dingli; Ma, Guojun; Li, Jing; Cho, Jung-wook; Xiang, Zhang; Liu, Mengke; Zhu, Junlin
err分享
err收藏
Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2023-02-06
err4
PREAI
errAhn, Soung Yeoul; Jeong, Sang Guk; Kim, Eun Seong; Kang, Suk Hoon; Choe, Jungho; Ryu, Joo Young; Choi, Dae Woon; Lee, Jin Seok; Cho, Jung-Wook; Nakano, Takayoshi; Kim, Hyoung Seop
err分享
err收藏
Resolving the mixed-alkali effect on the viscoelastic behavior of supercooled liquids
errACTA MATERIALIA
IF9.3
err2023-01-01
err7
errOAAI
errYeo, Tae-min; Yuan, Bing; Lovi, Jacob; Cho, Jung-Wook; Sen, Sabyasachi
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
Hyoung Seop Kim 封面图
Hyoung Seop Kim (Hyoung Seop Kim)
H 指数: 99 · 论文数: 1.8K
T
Takayoshi Nakano
H 指数: 81 · 论文数: 1.1K
B
Byeong‐Joo Lee
H 指数: 76 · 论文数: 446
S
Sunghak Lee
H 指数: 66 · 论文数: 521
王辉 封面图
王辉 (Hui Wang)
H 指数: 66 · 论文数: 727
查看更多