logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Satılmış Ürgün

kocaeli university

9H指数
61论文数
314被引数
收录论文 24
发表时间
logo
Effect of Thermal Cycling on the Progressive-Load Scratch Behavior of 3D-Printed PLA Composites Reinforced With Milled Glass Fiber热循环对3D打印PLA复合材料（以研磨玻璃纤维增强）渐进加载划痕行为的影响
errPolymer Composites
IF4.7
err2026-09-29
err0
PREAI
errSinan Fidan; Mustafa Özgür Bora; Nevin Gamze Karsli; Taner Yilmaz; Satılmış Ürgün; Mehmet İskender Özsoy
err分享
err收藏
Thermomechanical Properties of Carbon and Glass Fiber-Reinforced Epoxy Composites as Function of Drilling Parameters碳纤维和玻璃纤维增强环氧复合材料的力学热性能与钻削参数的关系
errPolymers
IF4.9
err2026-09-22
err0
errOAAI
errSatılmış Ürgün; Sinan Fidan; Eser Yarar; Mehmet İskender Özsoy; Mustafa Özgür Bora
err分享
err收藏
Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball-On-Disk Wear of Additively Manufactured Polylactic Acid Composites热循环老化与增强体含量对增材制造聚乳酸复合材料球-盘磨损的协同影响
errPolymer Composites
IF4.7
err2026-08-31
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yilmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy
err分享
err收藏
Geometry-Driven Deformation and Degradation Behavior of Crimped Electrical Connections Under Coupled Environmental and Chemical Loading几何驱动下的压接电气连接在耦合环境与化学载荷作用下的变形与退化行为
errMaterials
IF3.2
err2026-06-01
err0
errOAAI
errCevher Sunguray; Satılmış Ürgün; Sinan Fidan; Mustafa Özgür Bora
err分享
err收藏
Comparison of surface treatment protocols for a 3D-printable resin for definitive crowns: Effects on surface roughness and bonding performance3D打印树脂用于最终牙冠的表面处理方案比较：对表面粗糙度和粘接性能的影响
errJournal of Prosthodontics
IF1.5
err2026-05-29
err0
errOAAI
errEngin Sacu DDS; Mehmet Can Ararat DDS; Sinan Fidan PhD; Satılmış Ürgün PhD; Mustafa Özgür Bora PhD; Neslihan Tekce DDS, PhD
err分享
err收藏
Primer Adhesion on Laser-Textured AA2024-T3: Effects of Texture Geometry via Reciprocating Sliding Tests激光纹理AA2024-T3上的底漆附着力：通过往复滑动测试研究纹理几何形状的影响
errCoatings
IF2.8
err2026-04-29
err0
errOAAI
errÖzer Coşkun; Sinan Fidan; Mustafa Özgür Bora; Satılmış Ürgün; Mehmet İskender Özsoy; Yezen Kandur
err分享
err收藏
Effect of Spraying Distance on the Scratch Wear Behavior of 8YSZ and Gd-Yb-Y Co-Doped ZrO2 TBCs喷涂距离对8YSZ和Gd-Yb-Y共掺杂ZrO2 TBCs划痕磨损行为的影响
errCoatings
IF2.8
err2026-04-06
err0
errOAAI
errAli Haydar Güneş; Sinan Fidan; Şaban Hakan Atapek; Mustafa Özgür Bora; Satılmış Ürgün; Mehmet İskender Özsoy; Sedat İriç; Tuğçe Yayla Yazıcı
err分享
err收藏
Tribological Performance of Glass/Kevlar Hybrid Epoxy Composites: Effects of Pressurized Water-Immersion Aging Under Reciprocating Sliding WearÖzsoy, M.İ.; Bora, M.Ö.; Ürgün, S.; Fidan, S.; Güleç, E. 玻璃/凯夫拉混杂环氧复合材料的摩擦学性能：在往复滑动磨损下受压水浸老化的影响。Polymers 2025, 17, 2944. [Google Scholar] [CrossRef]
errPolymers
IF4.9
err2026-03-03
err0
errOAAI
errMehmet İskender Özsoy; Mustafa Özgür Bora; Satılmış Ürgün; Sinan Fidan; Erman Güleç
err分享
err收藏
Effects of Pressurized Water Aging on Reciprocating Friction and Wear of FDM 3D-Printed PLA and Glass Fiber Reinforced PLA Composites加压水老化对FDM 3d打印PLA和玻璃纤维增强PLA复合材料往复摩擦磨损的影响
errPolymers
IF4.9
err2026-02-05
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yilmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy
err分享
err收藏
Validating a Hashin-Based Shell Model for LVI of Woven E-Glass/Epoxy Laminates基于Hashin的壳模型在 woven E-Glass/epoxy 层合板低速冲击（LVI）中的验证
errPolymer Composites
IF4.7
err2026-01-16
err0
PREAI
errMehmet İskender Özsoy; Sinan Fidan; Satılmış Ürgün; Mustafa Özgür Bora; Ender Can Yakar
err分享
err收藏
Influence of adherend geometry modifications on the shear performance of single lap adhesive joints粘接件几何形状修改对单搭接胶接接头剪切性能的影响
errPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
IF2.2
err2026-01-01
err0
PREAI
errOzun, Elanur; Ceylan, Reyhan; Bora, M. Ozgur; Urgun, Satilmis; Fidan, Sinan; Yarar, Eser; Sinmazcelik, Tamer
err分享
err收藏
Tribological Response of Basalt/Carbon Hybrid Laminated Composites After Water-Immersion Aging: Influence of Stacking Sequence Under Reciprocating Wear玄武岩/碳纤维混杂层合复合材料经水浸老化的摩擦学响应：堆叠顺序对往复磨损的影响
errPolymers 2026, Vol. 18, Page 57
IF4.9
err2025-12-26
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Mustafa Özgür Bora; Togayhan Kutluk; Erman Güleç
err分享
err收藏
Tribological Response of Glass Fiber/Polyester Composites After Pressurized Water-Immersion Aging Assessed by Reciprocating and Ball-on-Disc Wear Testing高压水浸老化后玻璃纤维/聚酯复合材料的摩擦学响应评估：通过往复和球盘磨损测试
errPolymers 2025, Vol. 17, Page 2503
IF4.9
err2025-09-21
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Mustafa Özgür Bora; Erman Güleç
err分享
err收藏
Scratch Resistance and Tribological Enhancement of Epoxy Composites Reinforced with Chopped Glass Fiber and Nano Silica Through Taguchi Analysis通过田口分析评价短切玻璃纤维和纳米二氧化硅增强环氧复合材料的耐刮擦性能和摩擦学性能提升
errPolymers 2025, Vol. 17, Page 2550
IF4.9
err2025-09-21
err0
errOAAI
errElanur Ozun; Reyhan Ceylan; Mustafa Özgür Bora; Sinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Erman Güleç
err分享
err收藏
Effect of thermo-mechanical treatments on the structural properties and tribological behavior of precipitation hardenable Cu-4Ti (wt%) alloy热-机械处理对析出硬化Cu-4Ti（wt%）合金的结构性能和摩擦学行为的影响
errTribology International
IF6.9
err2025-09-02
err0
PREAI
errJarosław Konieczny; Krzysztof Labisz; Ş. Hakan Atapek; Sinan Fidan; M. Özgür Bora; Satılmış Ürgün
err分享
err收藏
Effect of laser induced remelting on the scratch behavior of spark plasma sintered nickel aluminide alloy激光诱导重熔对火花等离子烧结镍铝化物合金划痕行为的影响
errMaterials Chemistry and Physics
IF4.7
err2025-06-26
err0
PREAI
errGülşah Aktaş Çelik; Fatih Aksu; F. Betül Yılmaz Güler; Satılmış Ürgün; Sinan Fidan; M. Özgür Bora; Yunus Erbay; Ş. Hakan Atapek
err分享
err收藏
Modelling of Hardness and Electrical Conductivity of Cu-4Ti (wt.%) Alloy and Estimation of Aging Parameters Using Metaheuristic AlgorithmsCu-4Ti（wt.%）合金硬度和电导率的建模及利用元启发式算法估计时效参数
errMATERIALS
IF3.2
err2025-05-19
err0
errOAAI
errKonieczny, Jaroslaw; Labisz, Krzysztof; Urgun, Satilmis; Yigit, Halil; Fidan, Sinan; Bora, Mustafa Ozgur; Atapek, Saban Hakan; Cwiek, Janusz
err分享
err收藏
Stacking Sequence Effect of Basalt/Carbon Hybrid Laminated Composites on Solid Particle Erosion Behavior: From Ambient to Elevated Temperatures玄武岩/碳纤维混杂层合复合材料铺层顺序效应对固体颗粒冲蚀行为的影响：从室温到高温
errPOLYMERS
IF4.9
err2025-05-15
err0
errOAAI
errOzsoy, Mehmet Iskender; Fidan, Sinan; Bora, Mustafa Ozgur; Urgun, Satilmis
err分享
err收藏
Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites增强激光纹理铣削碳纤维增强玄武岩复合材料上底涂层的耐磨性和附着力
errPOLYMERS
IF4.9
err2025-04-23
err0
errOAAI
errCoskun, Ozer; Fidan, Sinan; Ozsoy, Mehmet Iskender; Bora, Mustafa Ozgur; Urgun, Satilmis; Sahin, Alp Eren; Yilmaz, Taner
err分享
err收藏
Metaheuristics Algorithm-Based Optimization for High Conductivity and Hardness CuNi2Si1 Alloy
errMATERIALS
IF3.2
err2025-02-27
err0
errOAAI
errKonieczny, Jaroslaw; Labisz, Krzysztof; Urgun, Satilmis; Yigit, Halil; Fidan, Sinan; Bora, Mustafa Ozgur; Atapek, S. Hakan
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
T
Tamer Sınmazçelik
H 指数: 25 · 论文数: 215
M
Mustafa Özgür Bora
H 指数: 20 · 论文数: 186
K
K. Labisz
H 指数: 17 · 论文数: 163
N
Nevin Gamze Karsli
H 指数: 17 · 论文数: 38
N
Neslihan Tekçe
H 指数: 17 · 论文数: 207
查看更多