Taner Yılmaz - Publications, H-index & Citations

Taner Yılmaz

kocaeli university

14H指数

57论文数

714被引数

收录论文 31

发表时间

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball-On-Disk Wear of Additively Manufactured Polylactic Acid Composites 热循环老化与增强体含量对增材制造聚乳酸复合材料球-盘磨损的协同影响

Polymer Composites

IF4.7

2026-08-31

OAAI

Sinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yilmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy

Influence of Thermal Cycling on Friction, Wear, and Damage Evolution of Fused Deposition Modeling of 3D-Printed Glass Fiber Reinforced Polylactic Acid Composites 热循环对3D打印玻璃纤维增强聚乳酸复合材料熔融沉积成型件的摩擦、磨损及损伤演化的影响

Polymer Composites

IF4.7

2026-08-15

OAAI

Sinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yılmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy

Evaluation of the Effect of Raster Angle on the Fracture Properties of 3D Printed Polycarbonate Using the Essential Work of Fracture Method 使用断裂功法评估栅格角度对3D打印聚碳酸酯断裂性能的影响

Fibers and Polymers

IF2.3

2026-07-01

OAAI

Yagci, Yusuf; Karsli, N. Gamze; Yilmaz, Taner

The optimization of laser welding parameters for welding of Hilumin®-copper using Taguchi method in electric vehicle battery pack manufacturing 采用田口方法优化Hilumin®-铜激光焊接参数在电动汽车电池包制造中的应用

The International Journal of Advanced Manufacturing Technology

IF0

2026-04-23

OAAI

Aygen Ahsen Yıldırım; Erol Feyzullahoğlu; Taner Yılmaz

Enhancing the Performance of 3D-Printed Polyamide Composites Through Pre- and Post-Processing Methods

Polymer Composites

IF4.7

2026-01-30

PREAI

Busra Eyri; Yusuf Yagci; N. Gamze Karsli; Taner Yilmaz

Investigation of I-poss adition in hybrid filler reinforced polyphenylene matrix composites: Mechanical, thermal and thermomechanical properties 研究I-poss添加剂在混杂填料增强聚苯醚基复合材料中的应用：力学、热学和热机械性能

Journal of Composite Materials

IF2.4

2026-01-01

PREAI

Sahin, Alp Eren; Yilmaz, Sinan; Sinmazcelik, Tamer; Yilmaz, Taner

Investigation of the effects of salt remelting treatment on the tensile, flexure, hardness and adhesive wear behavior of 3D-printed PET 研究盐重熔处理对3D打印PET的拉伸、弯曲、硬度和粘着磨损行为的影响

Progress in Additive Manufacturing

IF5.4

2025-09-24

PREAI

Okan Gul; Busra Eyri; N. Gamze Karsli; Taner Yilmaz

Hybrid Reinforcement of PLA With Pumice and Basalt Fiber: A Synergistic Approach 聚乳酸（PLA）与浮石和玄武岩纤维的复合增强：一种协同方法

Polymer Composites

IF4.7

2025-09-09

PREAI

Ugur Dincer; Nevin Gamze Karsli; Taner Yilmaz

Study of the Thermal and Hydrothermal Aging Effects on the Properties of 3D-Printed Thermoplastic Polyurethane 研究热老化与湿热老化对3D打印热塑性聚氨酯性能的影响

vinyl additive technology

IF0

2025-07-14

OAAI

Busra Eyri; Okan Gul; N. Gamze Karsli; Taner Yilmaz

Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites 增强激光纹理铣削碳纤维增强玄武岩复合材料上底涂层的耐磨性和附着力

POLYMERS

IF4.9

2025-04-23

OAAI

Coskun, Ozer; Fidan, Sinan; Ozsoy, Mehmet Iskender; Bora, Mustafa Ozgur; Urgun, Satilmis; Sahin, Alp Eren; Yilmaz, Taner

Characterization of ABS/PETG multi-material composites 3D printed by print-pause-print method

POLYMER ENGINEERING AND SCIENCE

IF3.2

2025-02-24

OAAI

Eyri, Busra; Gul, Okan; Yilmaz, Sinan; Karsli, N. Gamze; Yilmaz, Taner

Modeling short fiber reinforced polymer matrix composite materials using material designer 使用Material Designer对短纤维增强聚合物基复合材料进行建模

POLYMER COMPOSITES

IF4.7

2025-02-10

OAAI

Busra Eyri; Okan Gul; N. Gamze Karsli; Taner Yilmaz

Performance evaluation of boron-based particles as filler for thermoplastic polyester elastomer

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

IF3.4

2025-02-06

PREAI

Gul, Okan; Karsli, N. Gamze; Gul, Cihat; Durmus, Ali; Yilmaz, Taner

Study of the effect of hexagonal boron nitride addition to thermoplastic polyester elastomer composites reinforced with carbon, glass and basalt fibers

POLYMER BULLETIN

IF4

2024-08-28

PREAI

Gul, Okan; Karsli, Nevin Gamze; Gul, Cihat; Durmus, Ali; Yilmaz, Taner

Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics

Macromolecular Materials and Engineering

IF4.6

2024-02-05

OAAI

Yilmaz, Sinan; Gul, Okan; Eyri, Busra; Karsli, N. Gamze; Yilmaz, Taner

Investigation of the influence of salt remelting process on the mechanical, tribological, and thermal properties of 3D-printed poly(lactic acid) materials 研究盐重熔过程对3d打印的力学，摩擦学和热性能的影响 (乳酸) 材料

POLYMER ENGINEERING AND SCIENCE

IF3.2

2023-10-12

PREAI

Yilmaz, Sinan; Eyri, Busra; Gul, Okan; Karsli, N. Gamze; Yilmaz, Taner

Comprehensive characterization of 3D-printed bamboo/poly(lactic acid) bio composites

POLYMER ENGINEERING AND SCIENCE

IF3.2

2023-07-15

PREAI

Yilmaz, Sinan; Gul, Okan; Eyri, Busra; Yilmaz, N. Gamze Karsli; Yilmaz, Taner

Investigation of the effect of zeolite, bentonite, and basalt fiber as natural reinforcing materials on the material properties of PPS and CF-reinforced PPS

POLYMER ENGINEERING AND SCIENCE

IF3.2

2023-03-07

PREAI

Kizil, Aytunc; Dincer, Ugur; Yilmaz, Sinan; Gul, Okan; Karsli, N. Gamze; Yilmaz, Taner

Synergetic effect of graphene nanoplatelet, carbon fiber and coupling agent addition on the tribological, mechanical and thermal properties of polyamide 6,6 composites

COMPOSITES PART B-ENGINEERING

IF14.2

2019-04-01

PREAI

Karatas, Ecem; Gul, Okan; Karsli, Nevin Gamze; Yilmaz, Taner

Effects of coupling agent addition on the adhesive wear, frictional and thermal properties of glass fiber-reinforced polyamide 6,6 composites 偶联剂的添加对玻璃纤维增强聚酰胺6,6复合材料的粘着磨损，摩擦和热性能的影响

POLYMER BULLETIN

IF4

2018-01-17

PREAI

Karsli, Nevin Gamze; Yilmaz, Taner; Gul, Okan

研究方向