Tamás Tábi - Publications, H-index & Citations

Tamás Tábi

Faculty of Mechanical Engineering

28H指数

57论文数

2.3K被引数

收录论文 26

发表时间

The influence of D-lactide content, high-temperature drawing, and blending with poly(butylene adipate-co-terephthalate) elastomer on the physical aging kinetics and ductility of poly(lactic acid)D-丙交酯含量、高温拉伸以及与聚己二酸/对苯二甲酸丁二酯弹性体的共混对聚乳酸物理老化和延展性的影响

Journal of Thermal Analysis and Calorimetry

IF3.1

2026-06-02

OAAI

Gergely Csézi; Tamás Tábi

Enhanced crystallinity, toughness, and heat resistance of PLA using EVA, nucleating agent, and controlled crystallization 通过EVA、成核剂和可控结晶化提高PLA的结晶度、韧性及耐热性

Polymer Bulletin

IF4

2025-12-23

PREAI

Gergely Csézi; László Mészáros; Tamás Tábi

Let's talk about the definitions: Bioplastics, biopolymers, biodegradable polymers and others 我们来谈谈定义：生物塑料、生物聚合物、可生物降解聚合物及其他。

EXPRESS POLYMER LETTERS

IF2.6

2025-01-01

OAAI

Litauszki, Katalin; Tabi, Tamas; Meszaros, Laszlo

Influence of Epoxidized Natural Rubber of the thermoformability of Poly(Lactic Acid) biopolymer films using elevated temperature ball burst tests

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2023-11-13

OAAI

Tabi, T.; Gere, D.; Csezi, G.; Poloskei, K.

Effect of crystallinity on the migration of plastic additives from polylactic acid-based food contact plastics 结晶度对聚乳酸基食品接触塑料中塑料添加剂迁移的影响

FOOD PACKAGING AND SHELF LIFE

IF10.6

2023-04-01

OAAI

Petrovics, Noemi; Kirchkeszner, Csaba; Patko, Antonia; Tabi, Tamas; Magyar, Norbert; Szekely, Ilona Kovacsne; Szabo, Balint Samuel; Nyiri, Zoltan; Eke, Zsuzsanna

Effect of temperature and plasticizer content of polypropylene and polylactic acid on migration kinetics into isooctane and 95 v/v% ethanol as alternative fatty food simulants

FOOD PACKAGING AND SHELF LIFE

IF10.6

2022-09-01

OAAI

Petrovics, Noemi; Kirchkeszner, Csaba; Tabi, Tamas; Magyar, Norbert; Szekely, Ilona Kovacsne; Szabo, Balint Samuel; Nyiri, Zoltan; Eke, Zsuzsanna

The influence of nucleating agents, plasticizers, and molding conditions on the properties of injection molded PLA products 成核剂，增塑剂和成型条件对注塑PLA产品性能的影响

MATERIALS TODAY COMMUNICATIONS

IF4.5

2022-08-01

OAAI

Tabi, Tamas; Ageyeva, Tatyana; Kovacs, Jozsef Gabor

Swelling as a promoter of migration of plastic additives in the interaction of fatty food simulants with polylactic acid- and polypropylene-based plastics

FOOD CONTROL

IF6.3

2022-02-01

OAAI

Kirchkeszner, Csaba; Petrovicsa, Noemi; Tabi, Tamas; Magyar, Norbert; Kovacs, Jozsef; Szabo, Balint Samuel; Nyiri, Zoltan; Eke, Zsuzsanna

Comparison of the efficiency of the most effective heterogeneous nucleating agents for Poly(lactic acid)聚乳酸最有效的异相成核剂的效率比较

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2021-12-11

OAAI

Ageyeva, Tatyana; Kovacs, Jozsef Gabor; Tabi, Tamas

Improving the ductility and heat deflection temperature of injection molded Poly(lactic acid) products: A comprehensive review

POLYMER TESTING

IF6

2021-09-01

OAAI

Tabi, Tamas; Ageyeva, Tatyana; Kovacs, Jozsef Gabor

Investigation of the thermoformability of various D-Lactide content poly(lactic acid) films by ball burst test

POLYMER ENGINEERING AND SCIENCE

IF3.2

2020-04-01

OAAI

Poloskei, Kornel; Csezi, Gergely; Hajba, Sandor; Tabi, Tamas

The application of the synergistic effect between the crystal structure of poly(lactic acid) (PLA) and the presence of ethylene vinyl acetate copolymer (EVA) to produce highly ductile PLA/EVA blends

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2019-03-21

OAAI

Tabi, Tamas

Compressive characteristics and low frequency damping of aluminium matrix syntactic foams

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-01-01

OAAI

Katona, Balint; Szlancsik, Attila; Tabi, Tamas; Orbulov, Imre Norbert

Effects of 1D and 2D nanofillers in basalt/poly(lactic acid) composites for additive manufacturing

COMPOSITES PART B-ENGINEERING

IF14.2

2018-11-01

OAAI

Zotti, Aldobenedetto; Zuppolini, Simona; Tabi, Tamas; Grasso, Marzio; Ren, Gougang; Borriello, Anna; Zarrelli, Mauro

Using Factorial Design Methodology to Assess PLA-g-Ma and Henequen Microfibrillated Cellulose Content on the Mechanical Properties of Poly(lactic acid) Composites

international journal of mining science and technology

IF4.4

2017-01-01

OAAI

Dzul-Cervantes, M.; Herrera-Franco, P. J.; Tabi, T.; Valadez-Gonzalez, A.

Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties 聚乳酸晶型 (α ′ 和 α) 对其力学、热机械、热变形温度和蠕变性能的影响

EUROPEAN POLYMER JOURNAL

IF6.3

2016-09-01

125

OAAI

Tabi, T.; Hajba, S.; Kovacs, J. G.

Comparison of thermal, mechanical and thermomechanical properties of poly(lactic acid) injection-molded into epoxy-based Rapid Prototyped (PolyJet) and conventional steel mold

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2015-09-04

OAAI

Tabi, T.; Kovacs, N. K.; Sajo, I. E.; Czigany, T.; Hajba, S.; Kovacs, J. G.

Thermal simulations and measurements for rapid tool inserts in injection molding applications

APPLIED THERMAL ENGINEERING

IF6.9

2015-06-01

PREAI

Kovacs, Jozsef Gabor; Szabo, Ferenc; Kovacs, Norbert Krisztian; Suplicz, Andras; Zink, Bela; Tabi, Tamas; Hargitai, Hajnalka

Investigation of injection moulded poly(lactic acid) reinforced with long basalt fibres

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2014-09-01

OAAI

Tabi, Tamas; Egerhazi, Andras Zoltan; Tamas, Peter; Czigany, Tibor; Kovacs, Jozsef Gabor

Thermal and mechanical analysis of injection moulded poly(lactic acid) filled with poly(ethylene glycol) and talc

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2014-08-26

OAAI

Tabi, Tamas; Suplicz, Andras; Czigany, Tibor; Kovacs, Jozsef Gabor

研究方向