logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
贾云飞 封面图

贾云飞 (Yun-Fei Jia)

East China University of Science and Technology

23H指数
103论文数
1.7K被引数
收录论文 54
发表时间
logo
Mechanistic insights into heterogeneous interface-driven deformation patterns and strengthening mechanisms in harmonic-structured CoCrFeMnNi high-entropy alloys
errEuropean Journal of Mechanics - A/Solids
IF0
err2026-01-29
err0
PREAI
errYong Zhang; Yong-Ji Wang; Yun-Fei Jia; Zhe Zhang; Ruo-Fei Yuan; Ti-Wen Lu; Xian-Cheng Zhang; Shan-Tung Tu
err分享
err收藏
Fabrication of Ti6Al4V-Al metallic composites with an inverse enamel-like columnar structure via an anti-bioinspired strategy采用反仿生策略制备具有反向珐琅状柱状结构的Ti6Al4V-Al金属复合材料
errJournal of Alloys and Compounds
IF6.3
err2025-11-02
err0
PREAI
errWei Wang; Zhao-Long Wu; Bo Dong; Yun-Fei Jia; Fu-Zhen Xuan
err分享
err收藏
Mechanistic Insights into the Strength–Toughness Synergy of Nano-laminated structure: Role of Stacking Configurations纳米层状结构强度-韧性协同作用的机制洞察：堆叠构型的作用
errEuropean Journal of Mechanics - A/Solids
IF0
err2025-09-26
err0
PREAI
errYong Zhang; Xin-Ting Li; Chen-Yun He; Yu Lai; Yun-Fei Jia
err分享
err收藏
Fatigue Life Prediction and Feature Contribution Analysis of Surface-Strengthened Ti-6Al-4V Using a Preprocessing Neural Network表面强化Ti-6Al-4V的疲劳寿命预测及特征贡献分析：基于预处理神经网络
errMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
IF2.5
err2025-09-01
err0
PREAI
errZhang, Yong; Wang, Xiao-Kun; Jia, Yun-Fei; Dong, Bo; Wang, Zi-Meng; Yan, Jian-Jun; Zhang, Xian-Cheng; Tu, Shan-Tung
err分享
err收藏
Significantly extending the gradient layer and mechanical properties of Mg alloys by texture optimization通过织构优化显著扩展镁合金的梯度层和力学性能
errMaterials Research Letters
IF7.9
err2025-06-07
err0
errOAAI
errBo Guan; Jing Xu; Rui Fu; Shiyuan Xu; Xiao Li; Yunfei Jia; Qiang Hu; Yunchang Xin
err分享
err收藏
Designing Load-Bearing Bio-Inspired Materials for Simultaneous Static Properties and Dynamic Damping: Multi-Objective Optimization for Micro-Structure设计同时具有静态性能和动态阻尼的生物启发承重材料：微结构的-multi-objective optimization
errCHINESE JOURNAL OF MECHANICAL ENGINEERING
IF4.5
err2025-01-31
err0
errOAAI
errDong, Bo; Jia, Yunfei; Wang, Wei
err分享
err收藏
A prediction model of erosion rate under erosion-tension coupling for engine blade冲蚀-张力耦合作用下的发动机叶片冲蚀速率预测模型
errWEAR
IF6.1
err2025-01-01
err0
PREAI
errZhang, Yu; Jia, Yun-Fei; Sun, Xin-Wei; Fang, Zhen-Hua; Yan, Jian-Jun; Zhang, Cheng-Cheng; Xin, Li; Zhang, Xian-Cheng
err分享
err收藏
On the origin of the back stress in heterogeneous structure: intergranular residual stress and intragranular back stress关于非均质结构中背应力的起源: 晶间残余应力和晶内背应力
errACTA MECHANICA SINICA
IF4.6
err2024-12-19
err0
PREAI
errZhang, Yong; Wang, Run-Zi; Hama, Takayuki; Zhang, Xian-Cheng; Jia, Yun-Fei; Tu, Shan-Tung
err分享
err收藏
Revealing the fatigue strengthening and damage mechanisms of surface-nanolaminated gradient structure
errINTERNATIONAL JOURNAL OF PLASTICITY
IF12.8
err2024-11-01
err0
PREAI
errZhang, Yong; He, Chen-Yun; Wang, Xiaogang; Hama, Takayuki; Sun, Binhan; Jia, Yun-Fei; Zhang, Xian-Cheng; Tu, Shan-Tung
err分享
err收藏
Strain-rate and size dependence of gradient lamellar nickel investigated by in-situ micropillar compression
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-09-01
err1
errOAAI
errWang, Zi-Meng; Jia, Yun-Fei; Cai, Jia-Dong; Cui, Yuan-Yuan; Li, Xiao; Zhang, Xian-Cheng; Tu, Shan-Tung
err分享
err收藏
Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium
errNATURE COMMUNICATIONS
IF15.7
err2024-08-12
err0
errOAAI
errZhang, Yong; He, Chenyun; Yu, Qin; Li, Xiao; Wang, Xiaogang; Zhang, Yin; Wang, Ji; Jiang, Chao; Jia, Yunfei; Zhang, Xian-Cheng; Sun, Binhan; Ritchie, Robert O.; Tu, Shan-Tung
err分享
err收藏
A model of erosion rate prediction for component with complex geometry based on numerical simulation
errWEAR
IF6.1
err2024-06-01
err4
PREAI
errZhang, Yu; Jia, Yun-Fei; Sun, Xin-Wei; Fang, Zhen-Hua; Yan, Jian-Jun; Zhang, Cheng-Cheng; Zhang, Xian-Cheng
err分享
err收藏
Optimizing strength and ductility synergy achieved by multistage strain hardening in gradient recrystallized pure titanium
errMATERIALS CHARACTERIZATION
IF5.5
err2023-11-01
err1
PREAI
errLi, Xiao; Guan, Bo; Yang, Xiao-Feng; Zhang, Yong; Jia, Yun-Fei
err分享
err收藏
Lamellar aspect-ratio and thickness-dependent strength-ductility synergy in pure nickel during in-situ micro-tensile loading原位微拉伸加载过程中纯镍的层状纵横比和厚度相关的强度-延展性协同作用
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2023-09-01
err4
PREAI
errWang, Zi-Meng; Jia, Yun-Fei; Li, Kai -Shang; Zhang, Yong; Cai, Jia-Dong; Zhang, Xian-Cheng; Hirakata, Hiroyuki; Tu, Shan -Tung
err分享
err收藏
Low-cycle fatigue behaviour of Mg-9Gd-4Y-2Zn-0.5Zr alloys with different structures具有不同结构的Mg-9Gd-4Y-2Zn-0.5Zr合金的低周乏力行为
errJOURNAL OF MAGNESIUM AND ALLOYS
IF13.8
err2023-09-01
err10
errOAAI
errJi, Jinsheng; Zheng, Jie; Jia, Leichen; Zhang, Yong; Jia, Yunfei; Shi, Yusha; Zhang, Heng; Xue, Yong
err分享
err收藏
Application of machine learning in the design and optimization of bimodal structural materials
errCOMPUTATIONAL MATERIALS SCIENCE
IF3.3
err2023-03-01
err6
PREAI
errWang, Dong -Ming; Zhang, Yong; Jia, Yun-Fei; Zhang, Xian-Cheng; Yan, Jian-Jun; Shu, Wen-Xiang; Tu, Shan-Tung
err分享
err收藏
Ultra-low-temperature self-healing polyurethane with enhanced strength and elongation based on dual synergetic crosslinking strategy
errEUROPEAN POLYMER JOURNAL
IF6.3
err2022-07-01
err20
PREAI
errZhang, Yu; Zheng, Jian; Ma, Wanli; Zhang, Xiao; Du, Yongqiang; Li, Ke; Liu, Yahao; Yu, Guibo; Jia, Yunfei
err分享
err收藏
Size-dependent deformation mechanisms in copper gradient nano-grained structure: A molecular dynamics simulation铜梯度纳米晶粒结构中尺寸相关的变形机制: 分子动力学模拟
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2022-06-01
err28
PREAI
errHe, Chen-Yun; Yang, Xiao-Feng; Chen, Hao; Zhang, Yong; Yuan, Guang-Jian; Jia, Yun-Fei; Zhang, Xian-Cheng
err分享
err收藏
Customizable and highly sensitive 3D micro-springs produced by two-photon polymerizations with improved post-treatment processes通过双光子聚合生产的可定制且高度敏感的3D微弹簧，具有改进的后处理工艺
errAPPLIED PHYSICS LETTERS
IF3.6
err2022-04-26
err15
PREAI
errShang, Xinggang; Wang, Ning; Wang, Zimeng; Jiang, Hanqing; Jia, Yunfei; Zhou, Nanjia; Qiu, Min
err分享
err收藏
A finite element simulation on fully coupled diffusion, stress and chemical reaction
errMECHANICS OF MATERIALS
IF4.1
err2022-03-01
err5
PREAI
errCheng, Hui-Jie; Zhang, Xian-Cheng; Jia, Yun-Fei; Yang, Fuqian; Tu, Shan-Tung
err分享
err收藏

研究方向

主要研究领域包括机械结构仿生强度学仿生设计制造调控力学性能评定航空发动机叶片抗冲蚀航空发动机3D打印材料及涂层抗冲蚀测试冲蚀模型建立冲蚀性能预测基于机器学习的结构设计微区组织参数优化设计高端装备结构强度韧性疲劳寿命机械工程动力工程及工程热物理学硕：机械工程、动力工程及工程热物理专硕：机械工程、动力工程航空发动机预研JW科技委创新特区项目，2019.10-2020.9，主持2025年获中国大学生表面工程创新创意大赛优秀指导教师2024年获优秀研究生指导教师2024年获校长奖特等奖2024年指导研究生获材料与结构强度青年论坛报告特等奖2018年获华东理工大学“青年英才培育计划”2014年上海市授予“上海市优秀（博士）毕业生”2014年华东理工大学授予“华东理工大学荣誉毕业生”2012年获博士研究生“国家奖学金”谐波结构高熵合金断裂抗性设计原理Sand erosion mechanismTi/TiAlN multilayer coatingsaluminum matrix composite生物启发承载材料设计微结构多目标优化静动态性能协同镁合金织构优化力学性能沉淀强化合金强度-塑性协同机制Ti6Al4V-Al metallic compositesinverse enamel-like columnar structureanti-bioinspired strategy冲蚀磨损预测发动机叶片疲劳寿命模型增材制造TiB2/Al-Si复合材料侵蚀和制造缺陷背应力起源晶间残余应力晶内背应力表面纳米层状梯度结构的疲劳强化与损伤机制疲劳抗性纳米层状结构纯钛Strain-rate dependencesize dependencegradient lamellar nickelmicropillar compression低周疲劳基于数值模拟的复杂几何构件冲蚀速率预测模型梯度再结晶纯钛多阶段应变硬化层片纵横比厚度依赖性强度-韧性协同纯镍原位微拉伸机器学习在双模结构材料设计与优化中的应用机器学习异构金属材料性能预测结构设计水射流喷丸表面完整性固体颗粒冲蚀抗性异质结构金属材料设计与制造高密度界面异质材料力学性能晶体塑性表面超声滚压渗氧复合强化纯钛断裂韧性扩散-应力-化学反应全耦合有限元模拟梯度纳米晶铜尺寸依赖变形机制分子动力学模拟奥氏体微柱变形行为超声滚压纯钛梯度材料力学性能反演有限元分析梯度纳米结构表面层疲劳行为疲劳性能超声表面深滚压氧促进扩散处理块体超细晶CP-TiL-ECAPMDF晶粒细化与强化机制梯度结构对纯钛强化机制与疲劳行为的影响运动硬化模型异质变形诱导硬化双模态结构grain boundary structurescrack nucleationnickel nanolaminated structuremolecular dynamics study双相不锈钢循环变形行为纳米压痕有限元表征钛表面深层滚压与氧促扩散复合强化技术超声深滚高频与超声疲劳速率依赖塑性屈曲核壳线材焊接残余应力HDPE管小疲劳裂纹镍基高温合金晶粒尺寸影响梯度结构纯镍微观组织演化热稳定性机械表面强化技术Ti-6Al-4V热退火纯钛微观结构残余应力松弛
合作学者
合作期刊
R
Robert O. Ritchie
H 指数: 147 · 论文数: 1.0K
武
武晓君 (Xiaojun Wu)
H 指数: 115 · 论文数: 728
李新 封面图
李新 (Xin Li)
H 指数: 96 · 论文数: 1.8K
张
张勇 (Yong Zhang)
H 指数: 94 · 论文数: 1.1K
H
Helmut Cölfen
H 指数: 92 · 论文数: 583
查看更多