logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mustafa Güden

mechanical engineering

33H指数
163论文数
3.4K被引数
收录论文 72
发表时间
logo
Static and dynamic compression of a hybrid TPMS structure: effects of SLM process parameters混合TPMS结构的静态和动态压缩：SLM工艺参数的影响
errProgress in Additive Manufacturing
IF5.4
err2026-03-05
err0
PREAI
errMian Imran; Alper Taşdemirci; İlhan Şen; Çetin Bakıcı; Peyman Ansari; Metin U. Salamci; Mustafa Güden
err分享
err收藏
The Effect of Layered Cover Plate Material on The Ballistic Performance of Ceramic Armors: Experimental and Numerical Study层状覆盖板材料对陶瓷装甲弹道性能的影响：实验与数值研究
errInternational Journal of Impact Engineering
IF5.7
err2026-01-10
err0
PREAI
errSeven Burçin Çellek; Alper Taşdemirci; Gülden Çimen; Fakı Murat Yıldıztekin; Ahmet Kaan Toksoy; Mustafa Güden
err分享
err收藏
Novel strut-based mechanical analysis: flow stress determination of electron beam melt (EBM) lattice structures基于支架的机械分析新方法：电子束熔融（EBM）点阵结构的流动应力测定
errProgress in Additive Manufacturing
IF5.4
err2025-09-25
err0
PREAI
errMuhammad Arslan Bin Riaz; Hacer İrem Erten; Mustafa Güden
err分享
err收藏
Enhanced Wear Resistance of Epoxy Composites through the Incorporation of Diatom Frustules: A Multi-Objective Optimization Approach通过添加硅藻壳体提高环氧复合材料的耐磨性：一种多目标优化方法
errinternational journal of engineering science
IF2.9
err2025-08-09
err0
PREAI
errE. Gültürk; L. Aydın; A. E. Şahin; T. Sınmazçelik; M. Güden
err分享
err收藏
The Johnson and Cook damage and flow stress model parameters of a rolled stainless steel 304 alloyJohnson和Cook损伤及流动应力模型参数，针对经过轧制的304不锈钢合金
errinternational journal of applied mechanics
IF0
err2025-07-24
err0
PREAI
errİbrahim Berk Akdoğan; Kemal Davut; Mustafa Güden; Hacer İrem Erten; Alper Taşdemirci; Farshid Khosravi Maleki; Mustafa Sabri Gök
err分享
err收藏
A comprehensive study on the effectiveness of the stress and damage model parameters in predicting the compression fracture behavior of selective laser melted AlSi10Mg BCC lattices关于应力与损伤模型参数在预测选择性激光熔化AlSi10Mg BCC晶格压缩断裂行为有效性的一项综合研究
errMechanics of Materials
IF4.1
err2025-05-29
err0
PREAI
errMustafa Güden; Hacer İrem Erten; Recep M. Gorguluarslan; Umut Can Gülletutan; Akın Dağkolu; İstemihan Gökdağ; Ahmet Can Günaydın; Sertaç Altınok; Halil İbrahim Erol; Subhan Namazov
err分享
err收藏
A review of the experimental and numerical studies on the compression behavior of the additively produced metallic lattice structures at high and low strain rates关于增材制造金属点阵结构在高低应变率下压缩行为的实验与数值研究综述
errDefence Technology
IF5.9
err2025-01-10
err0
errOAAI
errMuhammad Arslan Bin Riaz; Mustafa Güden
err分享
err收藏
Investigation and validation of the flow stress equation and damage model parameters of an electron beam melted Ti6Al4V alloy with a martensitic phase
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-10-01
err1
PREAI
errGuden, Mustafa; Bin Riaz, Arslan; Toksoy, Ahmet Kaan; Yildiztekin, Murat; Erten, Hacer Irem; Cimen, Gulden; Hizli, Burak; Cellek, Burcin Seven; Gulec, Efe; Tasdemirci, Alper; Yavas, Hakan; Altinok, Sertac
err分享
err收藏
Development of the Johnson-Cook flow stress and damage parameters for the impact response of polycarbonate: Experimental and numerical approach
errINTERNATIONAL JOURNAL OF IMPACT ENGINEERING
IF5.7
err2023-09-01
err7
PREAI
errSarikaya, Mustafa; Guden, Mustafa; Kambur, Cagdas; Ozbek, Sevim Cankaya; Tasdemirci, Alper
err分享
err收藏
The impact response of a Nomex® honeycomb core/E-glass/epoxy composite sandwich structure to increasing velocities: Experimental and numerical analysis
errCOMPOSITE STRUCTURES
IF7.1
err2023-09-01
err12
PREAI
errCelik, Muhammet; Guden, Mustafa; Sarikaya, Mustafa; Tasdemirci, Alper; Genc, Cem; Ersoy, Kurtulus; Serin, Ozgur
err分享
err收藏
High strain-rate deformation analysis of open-cell aluminium foam
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-07-01
err7
errOAAI
errMauko, Anja; Sarikaya, Mustafa; Guden, Mustafa; Duarte, Isabel; Borovinsek, Matej; Vesenjak, Matej; Ren, Zoran
err分享
err收藏
Quasi-static and dynamic Brazilian testing and failure analysis of a deer antler in the transverse to the osteon growth direction
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2023-02-01
err4
errOAAI
errTuncer, Can; Guden, Mustafa; Orhan, Mehmet; Sarikaya, Mustafa Kemal; Tasdemirci, Alper
err分享
err收藏
The strain rate history effect in a selective-laser-melt 316L stainless steel
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-01-01
err6
PREAI
errEnser, Samed; Guden, Mustafa; Tasdemirci, Alper; Davut, Kemal
err分享
err收藏
Investigation of penetration behavior of combined geometry shells at quasi-static and intermediate strain rates: An experimental and numerical study
errTHIN-WALLED STRUCTURES
IF6.6
err2023-01-01
err1
errOAAI
errTuran, Ali Kivanc; Tasdemirci, Alper; Kara, Ali; Sahin, Selim; Guden, Mustafa
err分享
err收藏
Testing and modeling blast loading of a sandwich structure cored with a bio-inspired (balanus) core测试和建模以生物启发 (balanus) 芯为核心的三明治结构的爆炸载荷
errTHIN-WALLED STRUCTURES
IF6.6
err2022-06-01
err7
PREAI
errTuzgel, Firat; Akbulut, Emine Fulya; Guzel, Erkan; Yucesoy, Atacan; Sahin, Selim; Tasdemirci, Alper; Guden, Mustafa
err分享
err收藏
Impact loading of functionally graded metal syntactic foams
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-04-01
err33
PREAI
errMovahedi, Nima; Fiedler, Thomas; Tasdemirci, Alper; Murch, Graeme E.; Belova, Irina, V; Guden, Mustafa
err分享
err收藏
The strain rate sensitive flow stresses and constitutive equations of a selective-laser-melt and an annealed-rolled 316L stainless steel: A comparative study
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-03-01
err23
errOAAI
errGuden, Mustafa; Enser, Samed; Bayhan, Mesut; Tasdemirci, Alper; Yavas, Hakan
err分享
err收藏
Processing and characterization of geopolymer and sintered geopolymer foams of waste glass powders
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2021-09-01
err28
errOAAI
errPolat, Dilan; Guden, Mustafa
err分享
err收藏
Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2021-09-01
err47
errOAAI
errGuden, Mustafa; Yavas, Hakan; Tanrikulu, Ahmet Alptug; Tasdemirci, Alper; Akin, Baris; Enser, Samed; Karakus, Ayberk; Hamat, Burcu Arslan
err分享
err收藏
Determination of the material model and damage parameters of a carbon fiber reinforced laminated epoxy composite for high strain rate planar compression
errINTERNATIONAL JOURNAL OF IMPACT ENGINEERING
IF5.7
err2021-03-01
err19
PREAI
errShi, Chen; Guo, Baoqiao; Sarikaya, Mustafa; Celik, Muhammet; Chen, Pengwan; Guden, Mustafa
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
J
John W. Gillespie
H 指数: 70 · 论文数: 484
陈鹏万 封面图
陈鹏万 (Pengwan Chen)
H 指数: 45 · 论文数: 380
M
Matej Vesenjak
H 指数: 44 · 论文数: 218
G
Graeme E. Murch
H 指数: 42 · 论文数: 601
T
Thomas Fiedler
H 指数: 40 · 论文数: 259
查看更多