M.T. Pérez‐Prado - Publications, H-index & Citations

M.T. Pérez‐Prado

IMDEA Materials Institute

50H指数

196论文数

8.6K被引数

收录论文 107

发表时间

Laser powder bed fusion of a newly designed Fe-based bulk metallic glass with enhanced soft magnetic properties 新设计的高性能软磁Fe基块体金属玻璃的激光粉末床熔融

Acta Materialia

IF9.3

2026-08-07

PREAI

M. Rodríguez-Sánchez; S. Sadanand; A. Ghavimi; R. Busch; P. Sharangi; E. Ferrara; G. Barrera; P. Tiberto; P. Kontis; I. Gallino; M.T. Pérez-Prado

Influence of the as-built microstructure on the recrystallization of an additively manufactured Inconel939 Ni-based superalloy 增材制造Inconel939镍基高温合金的初始微观结构对其再结晶的影响

materials science and engineering: a

IF0

2026-04-09

OAAI

I. Rodríguez-Barber; L. Romero-Resendiz; M. Naeem; T. Voisin; M.T. Pérez-Prado

Multi-scale mechanical characterization of an additively manufactured Fe-based glass-forming alloy 增材制造铁基玻璃形成合金的多尺度力学表征

Additive Manufacturing Letters

IF4.7

2025-11-28

OAAI

C. Garrote-Junco; A. Ghavimi; R. Busch; M.T. Pérez-Prado; M. Rodríguez-Sánchez

Does high entropy improve elastic properties of 3D lattice materials?—A genetic algorithm and active learning study 高熵是否提高了3D晶格材料的弹性性能？——一种遗传算法和主动学习研究

Computational Materials Science

IF3.3

2025-11-03

PREAI

Sergei Zorkaltsev; Javier Segurado; María Teresa Pérez-Prado; Maciej Haranczyk

Preface: Special issue honoring the legacy of Professor Michael E. Kassner 前言：纪念迈克尔·E·卡斯纳教授的遗产特刊

Journal of Materials Science

IF3.9

2025-08-30

OAAI

Praveen Kumar; María Teresa Pérez-Prado; Terence G. Langdon

Understanding the effect of tailored heat treatment on Zr-modified Al7075 fabricated by laser powder bed fusion 理解激光粉末床熔融制备的Zr改性Al7075的定制热处理效果

Materials & Design

IF7.9

2025-08-20

OAAI

Nicolas Nothomb; Ignacio Rodriguez-Barber; Marie-Noëlle Avettand-Fénoël; María Teresa Pérez Prado; Maya Marinova; Aude Simar

Laser powder bed fusion of an Fe-based metallic glass using time delays 基于铁基金属玻璃的激光粉末床熔融时间延迟研究

Additive Manufacturing

IF11.1

2025-08-07

OAAI

M. Rodríguez-Sánchez; A.D. Boccardo; S. Sadanand; A. Ghavimi; R. Busch; P. Sharangi; E. Ferrara; G. Barrera; P. Tiberto; D. Tourret; I. Gallino; M.T. Pérez-Prado

Influence of temperature and architecture on the amplitude and frequency of serrations in additively manufactured Inconel718 lattices 温度和结构对增材制造Inconel718晶格中锯齿形振幅和频率的影响

Journal of Materials Science

IF3.9

2025-08-07

PREAI

S. Sahoo; Z. Chen; X. Jin; D. Mordehai; M. Haranczyk; M. T. Pérez-Prado

Melt pool overlap as a key tool for microstructure design in PBF-LB/M of a Ni-based superalloy: empirical and analytical approaches 熔池重叠作为Ni基高温合金PBF-LB/M中微观结构设计的关键工具：经验与解析方法

Additive Manufacturing

IF11.1

2025-07-22

PREAI

I. Rodríguez-Barber; M.T. Pérez-Prado

Influence of architecture and temperature on the critical strain for serrated flow in additively manufactured Inconel 718 lattices 增材制造Inconel 718多孔结构的锯齿流变临界应变受结构和温度的影响

ADDITIVE MANUFACTURING

IF11.1

2025-02-01

PREAI

Sahoo, S; Chen, Z; Jin, X; Mordehai, D; Haranczyk, M; Pérez-Prado, MT

Understanding the effect of pre-sintering scanning strategy on the relative density of Zr-modified Al7075 processed by laser powder bed fusion

ADDITIVE MANUFACTURING LETTERS

IF4.7

2024-12-01

OAAI

Nothomb, Nicolas; Rodriguez-Barber, Ignacio; Perez-Prado, Maria Teresa; Mena, Norberto Jimenez; Pyka, Grzegorz; Simar, Aude

Precontouring as a Tool to Improve the Laser Powder Bed Fusion Printability of Inconel939 Thin Walls 预轮廓作为改善Inconel939薄壁的激光粉末床熔融可印刷性的工具

ADVANCED ENGINEERING MATERIALS

IF3.3

2024-10-31

PREAI

Rodriguez-Barber, Ignacio; Fernandez-Blanco, Ana Maria; Unanue-Arruti, Iker; Madariaga-Rodriguez, Inaki; Milenkovic, Srdjan; Perez-Prado, Maria Teresa

The extended scaling laws of the mechanical properties of additively manufactured body-centered cubic lattice structures under large compressive strains

MECHANICS OF MATERIALS

IF4.1

2024-09-01

PREAI

Chen, Zhi; Sahoo, Souvik; perez-Prado, Maria Teresa; Mordehai, Dan

Anomalous twin boundary formation in magnesium alloys by rapid solidification 通过快速凝固在镁合金中形成异常孪晶界

ACTA MATERIALIA

IF9.3

2024-06-01

OAAI

Jin, X.; Barro, O.; Riveiro, A.; Pou, J.; Perez-Prado, M. T.

Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass

MATERIALIA

IF2.9

2024-06-01

OAAI

Rodriguez-Sanchez, M.; Sadanand, S.; Ghavimi, A.; Busch, R.; Tiberto, P.; Ferrara, E.; Barrera, G.; Thorsson, L.; Wachter, H. J.; Gallino, I.; Perez-Prado, M. T.

Novel titanium-based sulfur-containing BMG for PBF-LB/M

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2024-05-25

OAAI

Schoenrath, Hanna; Wegner, Jan; Frey, Maximilian; Schroer, Martin A.; Jin, Xueze; Perez-Prado, Maria Teresa; Busch, Ralf; Kleszczynski, Stefan

Effect of microstructure on the effectiveness of hybridization on additively manufactured Inconel718 lattices

MATERIALS & DESIGN

IF7.9

2023-12-01

OAAI

Banait, S.; Liu, C.; Campos, M.; Pham, M. S.; Perez-Prado, M. T.