logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
A

Adam Grajcar

department of engineering materials and biomaterials

29H指数
198论文数
2.7K被引数
收录论文 50
发表时间
logo
Dilatometric study on decomposition of undeformed and plastically deformed supercooled austenite in medium-Mn steels alloyed with Mo and Cu additions对添加Mo和Cu的中锰钢中未变形和塑性变形过冷奥氏体分解的膨胀分析研究
errArchives of Civil and Mechanical Engineering
IF4.4
err2026-08-13
err0
errOAAI
errAdam Skowronek; Tamiru Hailu Kori; Firew Tullu Kassaye; Oguz Gulbay; Alexander Gramlich; Ulrich Krupp; Adam Grajcar
err分享
err收藏
Influence of Mo and Cu additions on the microstructure and mechanical performance of air-hardening ductile forging steels in the context of circular economy在循环经济背景下，Mo和Cu添加对空冷可锻延性锻造钢微观结构与力学性能的影响
errMaterials Science and Engineering A-Structural Materials Properties Microstructure and Processing
IF7
err2026-08-03
err0
errOAAI
errOguz Gulbay; Oyku Guner; Adam Skowronek; Aleksandra Kozłowska; Adam Grajcar; Ulrich Krupp; Alexander Gramlich
err分享
err收藏
Effect of Cu and Mo on the kinetics of isothermal phase transformations in advanced multiphase medium-Mn steels designed for the QP processCu和Mo对QP工艺设计用先进多相中锰钢等温相变动力学的影响
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-09
err0
errOAAI
errFirew Tullu Kassaye; Adam Skowronek; Oguz Gulbay; Alexander Gramlich; Ulrich Krupp; Adam Grajcar
err分享
err收藏
Constitutive modelling and the effect of Mn addition on hot deformation behavior of advanced medium-Mn steels先进中锰钢的本构建模及锰添加对其热变形行为的影响
errJournal of Materials Research and Technology
IF6.6
err2026-05-09
err0
errOAAI
errAleksandra Kozłowska; Khaled Elanany; Wojciech Borek; Adam Grajcar
err分享
err收藏
Effect of intercritical annealing temperature on austenite formation in medium-Mn steels: a thermodynamic and experimental study中锰钢中临界退火温度对奥氏体形成的影响：热力学与实验研究
errContinuum Mechanics and Thermodynamics
IF2.2
err2026-05-01
err0
errOAAI
errMorawiec, Mateusz; Opara, Jaroslaw; Kozlowska, Aleksandra; Grajcar, Adam
err分享
err收藏
Assessment of technological plasticity of high-Mn steels in SICO test高-Mn钢在SICO测试中的技术塑性评估
errArchives of Civil and Mechanical Engineering
IF4.4
err2026-02-08
err0
PREAI
errGabriela Fojt-Dymara; Marek Opiela; Barbara Grzegorczyk; Adam Grajcar
err分享
err收藏
Thermodynamic Modeling of Microstructural Design of Lightweight Ferritic Steels轻质铁素体钢微观结构设计的热力学建模
errMetals 2025, Vol. 15, Page 912
IF2.5
err2025-08-24
err0
PREAI
errTamiru Hailu Kori; Adam Skowronek; Jarosław Opara; Ana Paula Domingos Cardoso; Adam Grajcar
err分享
err收藏
Continuous annealing of medium-Mn steels: design of sustainable manufacturing and “rapid investigation” of heat treatment中锰钢的连续退火：可持续制造的设计与热处理的“快速研究”
errArchives of Civil and Mechanical Engineering
IF4.4
err2025-07-15
err0
errOAAI
errAdam Skowronek; Adam Grajcar
err分享
err收藏
Experimental Investigation and FEM Simulation of the Tensile Behavior of Hot-Rolled Quenching and Partitioning 5Mn Steel热轧淬火配分5Mn钢拉伸行为的实验研究和有限元模拟
errMATERIALS
IF3.2
err2025-02-17
err0
errOAAI
errKassaye, Firew Tullu; Kori, Tamiru Hailu; Kozlowska, Aleksandra; Grajcar, Adam
err分享
err收藏
Monitoring the phase evolution and fracture behavior of advanced multiphase QP steel using EBSD technique and digital image correlation利用EBSD技术和数字图像相关技术监测先进多相QP钢的相演变和断裂行为
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-10-01
err3
errOAAI
errKozlowska, Aleksandra; Kokot, Grzegorz; Matus, Krzysztof; Grajcar, Adam
err分享
err收藏
Thermodynamic approach for designing processing routes of 4Mn quenching and partitioning steel设计4Mn淬火配分钢加工路线的热力学方法
errJOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
IF3.1
err2024-09-02
err2
errOAAI
errKozlowska, Aleksandra; Skowronek, Adam; Grzegorczyk, Barbara; Grajcar, Adam
err分享
err收藏
Nanobainite formation in high-Al medium-Mn steels: thermodynamic approach高铝中锰钢中纳米贝氏体的形成: 热力学方法
errJOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
IF3.1
err2024-07-22
err1
errOAAI
errMorawiec, Mateusz; Opara, Jaroslaw; Grajcar, Adam
err分享
err收藏
Effect of Ti micro-addition on the hot tensile behaviour, microstructure and fractography of low-C high-manganese steels
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2024-06-05
err2
errOAAI
errFojt-Dymara, Gabriela; Opiela, Marek; Grzegorczyk, Barbara; Golombek, Klaudiusz; Grajcar, Adam
err分享
err收藏
Thermodynamic Prediction and Experimental Verification of Transformation-Induced Plasticity/Twinning-Induced Plasticity Effects in Advanced Low-C High-Mn Steel at Different Deformation Temperatures不同变形温度下先进低C高mn钢相变诱发塑性/孪晶诱发塑性效应的热力学预测及实验验证
errADVANCED ENGINEERING MATERIALS
IF3.3
err2024-05-02
err0
PREAI
errKozlowska, Aleksandra; Opara, Jaroslaw; Stawarczyk, Piotr; Radwanski, Krzysztof; Grajcar, Adam
err分享
err收藏
Dependence of mechanical properties on the phase composition of intercritically annealed medium-Mn steel as the main competitor of high-strength DP steels机械性能对作为高强度DP钢主要竞争对手的临界退火中锰钢的相组成的依赖性
errSCIENTIFIC REPORTS
IF3.9
err2024-04-26
err2
errOAAI
errSkowronek, Adam; Grajcar, Adam; Petrov, Roumen H.
err分享
err收藏
Retained austenite grain size as a strength-plasticity relationship indicator in Al-alloyed medium-Mn steel processed by intercritical annealing通过临界退火处理的铝合金中锰钢中，残余奥氏体晶粒尺寸是强度-塑性关系的指标
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-09-01
err8
errOAAI
errSkowronek, Adam; Grajcar, Adam; Sozanska-Jedrasik, Liwia; Radwanski, Krzysztof; Matus, Krzysztof; Opara, Jaroslaw
err分享
err收藏
Microstructure evolution and strain hardening behavior of thermomechanically processed low-C high-manganese steels: an effect of deformation temperature热机械加工的低C高锰钢的组织演变和应变硬化行为: 变形温度的影响
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2023-06-30
err3
errOAAI
errKozlowska, Aleksandra; Stawarczyk, Piotr; Grajcar, Adam; Radwanski, Krzysztof; Matus, Krzysztof; Samek, Ludovic
err分享
err收藏
Microstructure evolution of medium-manganese Al-alloyed steel manufactured by double-step intercritical annealing: Effects of heating and cooling rates通过双步临界间退火制造的中锰Al合金钢的组织演变: 加热和冷却速率的影响
errMATERIALS CHARACTERIZATION
IF5.5
err2023-05-01
err8
errOAAI
errKozlowska, Aleksandra; Morawiec, Mateusz; Petrov, Roumen H.; Grajcar, Adam
err分享
err收藏
Enhancing mechanical properties of hot-rolled Al-alloyed medium-Mn steel by novel double-step intercritical annealing新型双步临界退火提高热轧铝合金中锰钢的力学性能
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-02-01
err6
PREAI
errKozlowska, Aleksandra; Morawiec, Mateusz; Skowronek, Adam; Grajcar, Adam; Matus, Krzysztof; Nuckowski, Pawel M.
err分享
err收藏
Effect of prior martensite formation on the bainite transformation kinetics in high-strength 3% Mn multiphase steel
errJOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
IF3.1
err2022-11-25
err13
errOAAI
errMorawiec, M.; Skowronek, A.; Kozlowska, A.; Garcia-Mateo, C.; Grajcar, A.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
R
Roumen Petrov
H 指数: 54 · 论文数: 411
C
Carlos García-Mateo
H 指数: 52 · 论文数: 218
J
J.A. Jiménez
H 指数: 41 · 论文数: 273
U
Ulrich Krupp
H 指数: 36 · 论文数: 342
R
Roman Kuziak
H 指数: 24 · 论文数: 265
查看更多