logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
C

Cho‐Pei Jiang

Department of Mechanical Engineering

26H指数
145论文数
1.7K被引数
收录论文 48
发表时间
logo
Laser powder bed fusion of alumina-reinforced Inconel 718: effects of oxide dispersion on material behavior氧化铝增强Inconel 718的激光粉末床熔融：氧化物分散对材料行为的影响
errProgress in Additive Manufacturing
IF5.4
err2026-09-24
err0
PREAI
errAndi Ard Maidhah; Mayur Jiyalal Prajapati; Maziar Ramezani; Wojciech Macek; Libor Beránek; Cho-Pei Jiang
err分享
err收藏
Process-engineered lateral pore stabilization in thermally-extruded ZrO2-nHA reinforced mPEG-PCL-mPEG scaffolds via thermal extrusion
errInternational Journal of Advanced Manufacturing Technology
IF3.1
err2026-08-15
err0
PREAI
errLiping Wang; Jianghui Dong; Yu-Teng Huang; Hsu-Wei Fang; Mayur Jiyalal Prajapati; Cho-Pei Jiang
err分享
err收藏
Additive manufacturing of advanced electronic devices: a comprehensive review of materials, processes, and applications先进电子器件的增材制造：材料、工艺与应用的全面综述
errInternational Journal of Advanced Manufacturing Technology
IF3.1
err2026-08-11
err0
errOAAI
errBayu Wiro Karuniawan; Chinmai Bhat; Jianghui Dong; Liping Wang; Maziar Ramezani; Cho-Pei Jiang
err分享
err收藏
Fabrication investigation and properties evaluation of advanced metal-ceramic lattice composites engineered by ceramic additive manufacturing and infiltration casting process通过陶瓷增材制造和浸渗铸造工艺制备先进金属-陶瓷点阵复合材料的制备工艺研究及性能评价
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-06-25
err0
errOAAI
errChinmai Bhat; Yulius Shan Romario; Libor Beránek; Prateek Saxena; Rajesh Ghosh; Wojciech Macek; Maziar Ramezani; Cho-Pei Jiang
err分享
err收藏
Proof-of-Concept Digital-Physical Workflow for Clear Aligner Manufacturing概念验证的数字-物理工作流程用于隐形矫治器制造
errDentistry Journal
IF3.1
err2026-03-03
err0
errOAAI
errShih-Hao Huang; I-Chiang Chou; Mayur Jiyalal Prajapati; Yu-Hsiang Wang; Po-Kai Le; Cho-Pei Jiang
err分享
err收藏
Hybrid Additive Manufacturing of Waveform Polycarbonate Shells with In-Situ UV-Cured and Microwave-Foamed Core for Enhanced Energy Absorption波形聚碳酸酯外壳的混合增材制造：采用原位紫外固化和微波发泡芯材以增强能量吸收
errAdditive Manufacturing
IF11.1
err2026-02-28
err0
PREAI
errSohail Ali; Mayur Jiyalal Prajapati; Bing Jen Hsieh; Cheng-Yi Zhuang; Ding-Bing Lin; Cho-Pei Jiang; Bing Joe Hwang; Wei-Nien Su; Jeng-Ywan Jeng
err分享
err收藏
Precision Additive Manufacturing of Dental Scaffolds Using a Hydroxyapatite/Zirconia Bioceramic Composite Derived from Discarded Eggshells利用源自废弃蛋壳的羟基磷灰石/二氧化锆生物陶瓷复合材料进行牙科支架的精密增材制造
errInternational Journal of Precision Engineering and Manufacturing-Green Technology
IF5.6
err2025-12-08
err0
PREAI
errYulius Shan Romario; Chinmai Bhat; I-Chiang Chou; Samuel Bobby Sanjoto; Maziar Ramezani; Cho-Pei Jiang
err分享
err收藏
Additive manufacturing of functionally graded materials using a hybrid vat photopolymerization process采用混合式树脂槽光聚合工艺的功能梯度材料增材制造
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-12-04
err0
PREAI
errMayur Jiyalal Prajapati; Hong-You Chen; Wojciech Macek; Libor Beránek; Marziar Ramezani; Cho-Pei Jiang
err分享
err收藏
Project-Based Learning Methodology: Restoring Hermit Crab Habitats With Photocurable Alumina Slurry 3D Printed Shells基于项目的学习方法：使用光固化氧化铝浆料3D打印外壳修复陆生寄居蟹栖息地
errEUROPEAN JOURNAL OF EDUCATION
IF3.6
err2025-11-23
err0
errOAAI
errLin, Yang-Cheng; Bhat, Chinmai; Romario, Yulius Shan; Jiang, Wan-Rong; Ramezani, Maziar; Jiang, Cho-Pei
err分享
err收藏
Multi-Objective Optimization of Dental Implant Designs With Multi-Recessed Holes: Insights From Static and Dynamic Finite Element Analysis
errINTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING
IF2.4
err2025-11-01
err0
errOAAI
errChou, I-Chiang; Huang, Shih-Hao; Lee, Cheng-Kang; Prajapati, Mayur Jiyalal; Huang, Jian-Cheng; Cheng, Yung-Chang; Jiang, Cho-Pei
err分享
err收藏
A combined strain energy density and entire fracture surface approach for life prediction of short carbon fibre reinforced PEEK一种结合应变能密度和完整断裂表面方法用于短碳纤维增强PEEK的寿命预测
errInternational Journal of Structural Integrity
IF3
err2025-10-13
err0
PREAI
errWojciech Macek; Aleksandra Mirowska; Przemysław Podulka; Cho-Pei Jiang; Andrea Avanzini; Filippo Berto
err分享
err收藏
A comprehensive review of supervised machine learning algorithms integrated with vat photopolymerization process for enhanced prediction of functionalities关于将监督机器学习算法与 vat 光聚合工艺集成以增强功能预测的全面综述
errinternational journal of advanced manufacturing technology
IF0
err2025-08-28
err0
PREAI
errVaishnavi Kirugunda Subramanya; Cho-Pei Jiang; Chinmai Bhat; Yulius Shan Romario; Xiaopeng Li; Maziar Ramezani
err分享
err收藏
Measurement Technique Comparison in the Entire Fracture Surface Topography Assessment for Additively Manufactured Materials
errMATERIALS
IF3.2
err2025-03-19
err0
errOAAI
errZielinski, Dawid; Mirowska, Aleksandra; Podulka, Przemyslaw; Jiang, Cho-Pei; Macek, Wojciech
err分享
err收藏
Development of dual nozzle slurry extrusion 3D printer by integrating material extrusion and photopolymerization for the fabrication of engineered ceramics通过集成材料挤出和光聚合的双喷嘴浆料挤出3D打印机的开发，用于制造工程陶瓷
errRAPID PROTOTYPING JOURNAL
IF3.6
err2025-03-04
err0
PREAI
errRomario, Yulius Shan; Bhat, Chinmai; Lin, Yu-Yang; Macek, Wojciech; Ramezani, Maziar; Jiang, Cho-Pei
err分享
err收藏
Effect of zirconia addition on laser powder bed fusion of Inconel 718-zirconia composite氧化锆添加对Inconel 718-氧化锆复合材料激光粉末床熔合的影响
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2025-03-01
err0
PREAI
errJiang, Cho-Pei; Maidhah, Andi Ard; Wibisono, Alvian Toto; Toyserkani, Ehsan; Macek, Wojciech; Ramezani, Maziar
err分享
err收藏
Additive manufactured enabled digital metallurgy processes, challenges and future prospects增材制造赋能的数字冶金工艺：挑战与未来展望
errAPPLIED MATERIALS TODAY
IF6.9
err2025-02-01
err1
PREAI
errAli, Sohail; Prajapati, Mayur Jiyalal; Bhat, Chinmai; Jiang, Cho-Pei; Jeng, Jeng-Ywan
err分享
err收藏
High-precision low-cost fabrication of dental surgical guides using dental grade photocurable resin through a hybrid additive-subtractive machine with reverse scanning
errRAPID PROTOTYPING JOURNAL
IF3.6
err2025-01-31
err0
PREAI
errRomario, Yulius Shan; Bhat, Chinmai; Jiang, Wan-Rong; Chou, I-Chiang; Weng, Dao-Yuan; Ramezani, Maziar; Jiang, Cho-Pei
err分享
err收藏
Investigating the Tribocorrosion Behaviour of NiTiNOL60 Alloy in Engineering and Biomedical Applications-An Overview研究NiTiNOL60合金在工程和生物医学应用中的摩擦腐蚀行为——综述
errMETALS
IF2.5
err2024-11-25
err1
errOAAI
errOkoani, Anthony O.; Nand, Ashveen; Jiang, Cho-Pei
err分享
err收藏
The Smith-Watson-Topper parameter and fracture surface topography relationship for additively manufactured 18Ni300 steel subjected to uniaxial variable-amplitude loading
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-10-01
err8
errOAAI
errMacek, Wojciech; Marciniak, Zbigniew; Lesiuk, Grzegorz; Podulka, Przemyslaw; Jiang, Cho-Pei
err分享
err收藏
Sintering parameter investigation for bimetallic stainless steel 316L/inconel 718 composite printed by dual-nozzle fused deposition modeling
errRAPID PROTOTYPING JOURNAL
IF3.6
err2024-07-25
err4
PREAI
errJiang, Cho-Pei; Masrurotin, Masrurotin; Ramezani, Maziar; Wibisono, Alvian Toto; Toyserkani, Ehsan; Macek, Wojciech
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
Zhiyuan Liu 封面图
Zhiyuan Liu (Zhiyuan Liu)
H 指数: 92 · 论文数: 1.1K
W
Wei‐Nien Su
H 指数: 64 · 论文数: 333
F
F. Berto
H 指数: 59 · 论文数: 291
E
Ehsan Toyserkani
H 指数: 56 · 论文数: 313
王沛 封面图
王沛 (Pei Wang)
H 指数: 53 · 论文数: 563
查看更多