.png){kind=icon}
返回
Assembly interface accuracy prediction model considering stress release
.png){kind=icon}
PRE
AI
DOI：10.1080/10589759.2025.2546952.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Due to the effects of vibration, shock and alternating loads, uneven stress release and stress redistribution occur in the large bolt connection structure of the machine tool. This will lead to deformation of the assembly structure under the combined action of assembly stress and residual stress. This will result in a decline in the assembly performance of the bolt connection structure. This paper proposes a prediction model for the connection state of the machine tool bed- guideway assembly interface considering stress release, and obtains the interface accuracy and stiffness losses caused by stress release. The installation base plane of the bed- guideway is simplified as a beam model, and the coupling relationship between assembly stress and residual stress is considered, obtaining the evolution law of the force balance system caused by stress release, and finally, the deflection deformation curve of the base plane in the time domain is obtained through the stress release law. This method will provide new methods and ideas for the accuracy prediction of the assembly interface.
Keyword:
Numerical control machine tool
stress relief
preload loosens
precision prediction
期刊
N
IF:
4.2
论文数:
1.8K
被引数:
2.1K
机构
引用论文
.png){kind=icon}
Structural Topology Design for Electromagnetic Performance Enhancement of Permanent-Magnet Machines永磁电机电磁性能增强的结构拓扑设计
OAAI
OAAI分享收藏A magnification-based multi-asperity (MBMA) model of rough contact without adhesion基于放大倍数的无粘连粗糙接触多粗糙体 (MBMA) 模型
PREAI
分享收藏分享收藏Robot stiffness modeling based on the rigid flexible coupling simulation and its application to trajectory planning基于刚柔耦合仿真的机器人刚度建模及其在轨迹规划中的应用
PREAI
分享收藏
查看更多内容