.png){kind=icon}
返回
Assembly process monitoring algorithm using force data and deformation data
.png){kind=icon}
PRE
AI
DOI：10.1016/j.rcim.2018.09.008.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
In robotic assembly with smaller repeatability than the assembly tolerance, failure should not occur. However, in the industrial field, assemblies may fail because of positional errors in the assembled parts and other factors. Owing to the characteristics of position control, the robot tries to move to the desired position irrespective of the failure of assembly. This situation causes excessive contact force, which can lead to the damage of parts and robots. To prevent this, an assembly process monitoring algorithm is proposed in this study. The role of this algorithm is to monitor, from the sensor information measured in the assembly process, whether the assembly state is formed; thus, the robot may recognize whether the assembly is normally performed or not. In this study, the monitoring performance was verified by applying the algorithm to the process of assembling the parts of a tablet PC.
Keyword:
Deformation sensor
Force/torque sensor
Robotic assembly
Assembly state estimation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
R
IF:
11.4
论文数:
3.4K
被引数:
1.3W
机构
引用论文
Designing Co7Fe3@TiO2 Core–Shell Nanospheres for Electromagnetic Wave Absorption in S and C Bands
.png){kind=icon}
PREAI
分享收藏Human-robot collaboration while sharing production activities in dynamic environment: SPADER system
OAAI
OAAI分享收藏
Set-Membership-Based Fault Detection and Isolation for Robotic Assembly of Electrical Connectors
PREAI
分享收藏
查看更多内容