.png){kind=icon}
返回
Hardware-in-the-loop pantograph tests using analytical catenary models
.png){kind=icon}
OA
AI
DOI：10.1080/00423114.2021.1962538.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Pantograph hardware-in-the-loop (HIL) testing is an experimental method in which a physical pantograph is excited by an actuator which reproduces the movement of a virtual catenary. This paper proposes a new method that uses analytical catenary models for HIL tests. The approach is based on an iterative scheme until achieving a steady-state regime. Some of the method's advantages include its ability to consider the delay in the control and communication system and its applicability to a wide range of analytical catenary models. The proposed algorithm was validated both numerically and experimentally. The experimental results obtained in the HIL pantograph tests were compared with those obtained from pure numerical simulations using a linear pantograph model and showed good accuracy with pantograph running at different speeds.
Keyword:
Hardware-in-the-loop
analytical catenary model
steady-state response
pantograph
期刊
V
IF:
3.9
论文数:
3.1K
被引数:
8.9K
机构
引用论文
分享收藏Analytical model of the pantograph-catenary dynamic interaction and comparison with numerical simulations弓网动力相互作用的分析模型及其与数值模拟的比较
OAAI
OAAI分享收藏On deep learning-based bias correction and downscaling of multiple climate models simulations.png)
IF0
PREAI
分享收藏分享收藏分享收藏A 3D absolute nodal coordinate finite element model to compute the initial configuration of a railway catenary用于计算铁路接触网初始配置的3D绝对节点坐标有限元模型OAAI
OAAI分享收藏
查看更多内容