Behrouz Bagheri - Publications, H-index & Citations

Behrouz Bagheri

tennessee technological university

46H指数

86论文数

3.9K被引数

收录论文 20

发表时间

Numerical investigation of heat input effects on additive manufacturing of molybdenum alloys

Journal of Materials Research and Technology

IF6.6

2026-01-27

OAAI

Amin Abdollahzadeh; Behrouz Bagheri Vanani; Mahmoud Abbasi; Melika Mohammadkhah; Sandra Klinge

High-pressure torsion (HPT) on nanocomposite produced by multi-pass friction stir process (MP-FSP): Microstructure evolution and wear behaviors 多道次摩擦搅拌处理(MP-FSP)制备的纳米复合材料的超高压扭转(HPT)处理：微观结构演变与磨损行为

Journal of Materials Research and Technology

IF6.6

2025-11-07

OAAI

Behrouz Bagheri Vanani; Mahmoud Abbasi; Amin Abdollahzadeh; Melika Mohammadkhah; Sandra Klinge

Enhancement of microstructure, corrosion, tribology, and mechanical properties of GMAW joints under various welding positions by post-weld refinement FSP 通过后焊细化摩擦搅拌处理（FSP）提升GMAW接头在不同焊接位置下的微观结构、耐腐蚀性、摩擦学及力学性能

The International Journal of Advanced Manufacturing Technology

IF0

2025-10-26

PREAI

Mohammad Reza Mehraban Dehaqani; Mahmoud Abbasi; Behrouz Bagheri Vanani; Mahdi Sadeqi Bajestani; Melika Mohammadkhah; Sandra Klinge

Zn interlayer and tool offset effects on IMC formation and strength of AA5083/AZ91Mg joints via friction stir vibration welding Zn中间层和工具偏移对摩擦振动搅拌焊接AA5083/AZ91Mg接头IMC形成及强度的影响

The International Journal of Advanced Manufacturing Technology

IF0

2025-10-12

PREAI

Behrouz Bagheri Vanani; Amin Abdollahzadeh; Mahmoud Abbasi; Melika Mohammadkhah; Sandra Klinge

CNT-induced microstructural evolution in Al matrix composite made by additive manufacturing and studying the effect of CNT presence on mechanical and tribological properties 碳纳米管诱导的增材制造铝基复合材料的微观结构演化，并研究碳纳米管存在对力学和摩擦学性能的影响

Results in Engineering

IF7.9

2025-08-16

OAAI

Mahmoud Abbasi; Behrouz Bagheri Vanani; Amin Abdollahzadeh; Mahdi Sadeqi Bajestani; Melika Mohammadkhah; Sandra Klinge

Effects of PWHT on the microstructure, corrosion, tribology, and mechanical properties of mild steel welds under different joining positions: Experimental and Numerical Study PWHT对不同焊接位置下低碳钢焊缝的微观结构、腐蚀、摩擦学及力学性能的影响：实验与数值研究

Journal of Materials Research and Technology

IF6.6

2025-07-28

PREAI

Behrouz Bagheri Vanani; Mohammad Reza Mehraban Dehaqani; Mahmoud Abbasi; Mahdi Sadeqi Bajestani; Melika Mohammadkhah; Sandra Klinge

Microstructure evolution and mechanical behaviors of Ti6Al4V/NbZr1 bimetallic additively manufactured structure: A molecular dynamics simulation Ti6Al4V/NbZr1双金属增材制造结构的微观结构演变与力学行为：分子动力学模拟

Journal of Materials Research and Technology

IF6.6

2025-07-04

OAAI

Behrouz Bagheri Vanani; Saiful Islam; Mahdi Sadeqi Bajestani; Yongho Jeon; Duck Bong Kim

A new investigation on graphene-reinforced 304L nanocomposite made by additive manufacturing process: Microstructure and tribology study

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-09-01

OAAI

Vanani, Behrouz Bagheri; Abbasi, Mahmoud; Abdollahzadeh, Amin

Fabrication of reinforced Al-Mg composite by TiC particles via FSW: Microstructure and tribology study

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

Vanani, Behrouz Bagheri; Abdollahzadeh, Amin

The hardfacing properties of the nickel-based coating deposited by the PTA process with the addition of wc nano-particles: Wear investigation

TRIBOLOGY INTERNATIONAL

IF6.9

2024-05-01

PREAI

Tahaei, Ali; Vanani, Behrouz Bagheri; Abbasi, Mahmoud; Arizmendi-Morquecho, Ana

Influence of Variation Ambient System on Dissimilar Friction Stir Welding of Al Alloy to Mg Alloy by the Addition of Nanoparticles and Interlayer 添加纳米颗粒和中间层的变化环境系统对铝合金与镁合金异种搅拌摩擦焊的影响

METALS AND MATERIALS INTERNATIONAL

IF4

2024-04-27

PREAI

Abdollahzadeh, Amin; Vanani, Behrouz Bagheri; Koohdar, Hamidreza; Jafarian, Hamid Reza

Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2022-12-12

PREAI

Abdollahzadeh, Amin; Bagheri, Behrouz; Shamsipur, Ali

Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation

METALS AND MATERIALS INTERNATIONAL

IF4

2022-10-12

PREAI

Bagheri, Behrouz; Shamsipur, Ali; Abdollahzadeh, Amin; Mirsalehi, Seyyed Ehsan

Different Attempt to Improve Friction Stir Brazing: Effect of Mechanical Vibration and Rotational Speed 改善搅拌摩擦钎焊的不同尝试: 机械振动和转速的影响

METALS AND MATERIALS INTERNATIONAL

IF4

2022-01-27

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Sharifi, Farzaneh; Abdollahzadeh, Amin

Investigation into novel multipass friction stir vibration brazing of carbon steels

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2021-11-18

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Sharifi, Farzaneh; Abdollahzadeh, Amin

Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2021-03-11

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Abdollahzadeh, Amin

A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites 搅拌摩擦加工与搅拌摩擦振动加工开发镁表面纳米复合材料的对比研究

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2020-08-15

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Abdollahzadeh, Amin; Kokabi, Amir Hossein

Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics

ADVANCES IN MANUFACTURING

IF3.8

2020-01-08

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud

Advanced Approach to Modify Friction Stir Spot Welding Process

METALS AND MATERIALS INTERNATIONAL

IF4

2019-08-28

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Abdollahzadeh, Amin; Omidvar, Hamid

Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2012-02-01

PREAI

Abbasi, M.; Bagheri, B.; Ketabchi, M.; Haghshenas, D. F.

研究方向