logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
A

Amin Abdollahzadeh

School of Metallurgy and Materials Engineering

33H指数
61论文数
3.0K被引数
收录论文 24
发表时间
logo
High-pressure torsion (HPT) on nanocomposite produced by multi-pass friction stir process (MP-FSP): Microstructure evolution and wear behaviors多道次摩擦搅拌处理(MP-FSP)制备的纳米复合材料的超高压扭转(HPT)处理：微观结构演变与磨损行为
errJournal of Materials Research and Technology
IF6.6
err2025-11-07
err0
errOAAI
errBehrouz Bagheri Vanani; Mahmoud Abbasi; Amin Abdollahzadeh; Melika Mohammadkhah; Sandra Klinge
err分享
err收藏
Continuous and pulsed TIG welded joint of ASTM A105-AISI 316L steels: Characterization of microstructure, mechanical properties, and fracture analysis连续和脉冲TIG焊接的ASTM A105-AISI 316L钢接头：微观结构、力学性能及断裂分析
errJournal of Materials Research and Technology
IF6.6
err2025-10-27
err0
errOAAI
errM. Sabzi; H.R. Jafarian; A. Abdollahzadeh; S.H. Mousavi Anijdan; A.R. Eivani
err分享
err收藏
Zn interlayer and tool offset effects on IMC formation and strength of AA5083/AZ91Mg joints via friction stir vibration weldingZn中间层和工具偏移对摩擦振动搅拌焊接AA5083/AZ91Mg接头IMC形成及强度的影响
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-10-12
err0
PREAI
errBehrouz Bagheri Vanani; Amin Abdollahzadeh; Mahmoud Abbasi; Melika Mohammadkhah; Sandra Klinge
err分享
err收藏
Effect of variations in peak and background currents during pulsed current gas tungsten arc welding on the dissimilar welded joint of ASTM A105-AISI 316L: Microstructural changes, mechanical properties and fracture mechanism脉冲电流气体保护钨极氩弧焊过程中峰值电流和背景电流变化对ASTM A105-AISI 316L异种焊接接头的影响：微观结构变化、力学性能及断裂机制
errJournal of Materials Research and Technology
IF6.6
err2025-09-18
err0
errOAAI
errM. Sabzi; H.R. Jafarian; A. Abdollahzadeh; S.H. Mousavi Anijdan; A.R. Eivani
err分享
err收藏
Pulsed current gas tungsten arc welded joint of ASTM A105-AISI 316L steels: Failure analysis and susceptibility to hydrogen embrittlement under slow strain rate tensile tests, and hydrogen sulfide corrosionASTM A105-AISI 316L钢的脉冲电流钨极氩弧焊焊接接头：失效分析及在慢应变速率拉伸试验和硫化氢腐蚀条件下的氢脆敏感性
errResults in Engineering
IF7.9
err2025-09-01
err0
errOAAI
errM. Sabzi; H.R. Jafarian; A. Abdollahzadeh; S.H.Mousavi Anijdan; A.R. Eivani
err分享
err收藏
CNT-induced microstructural evolution in Al matrix composite made by additive manufacturing and studying the effect of CNT presence on mechanical and tribological properties碳纳米管诱导的增材制造铝基复合材料的微观结构演化，并研究碳纳米管存在对力学和摩擦学性能的影响
errResults in Engineering
IF7.9
err2025-08-16
err0
errOAAI
errMahmoud Abbasi; Behrouz Bagheri Vanani; Amin Abdollahzadeh; Mahdi Sadeqi Bajestani; Melika Mohammadkhah; Sandra Klinge
err分享
err收藏
The role of force and torque in friction stir welding: A detailed review
errJOURNAL OF ADVANCED JOINING PROCESSES
IF4
err2025-06-01
err3
errOAAI
errAkbari, Mostafa; Esfandiar, Milad; Abdollahzadeh, Amin
err分享
err收藏
Significant enhancement of shape recovery and pseudoelasticity in an intercritically-annealed Fe-Ni-Mn alloy through cold rolling通过冷轧显著提高中温退火Fe-Ni-Mn合金的形状恢复和伪弹性
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-05-01
err0
errOAAI
errKoohdar, Hamidreza; Karimi-Alamuti, Samaneh; Abdollahzadeh, Amin
err分享
err收藏
A new investigation on graphene-reinforced 304L nanocomposite made by additive manufacturing process: Microstructure and tribology study
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-09-01
err8
errOAAI
errVanani, Behrouz Bagheri; Abbasi, Mahmoud; Abdollahzadeh, Amin
err分享
err收藏
Combined effect of nanocompositing and addition of interlayer on friction stir welding of aluminum/magnesium joint: a study
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2024-06-24
err1
PREAI
errAbdollahzadeh, Amin
err分享
err收藏
Fabrication of reinforced Al-Mg composite by TiC particles via FSW: Microstructure and tribology study
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-05-01
err29
errOAAI
errVanani, Behrouz Bagheri; Abdollahzadeh, Amin
err分享
err收藏
Influence of Variation Ambient System on Dissimilar Friction Stir Welding of Al Alloy to Mg Alloy by the Addition of Nanoparticles and Interlayer添加纳米颗粒和中间层的变化环境系统对铝合金与镁合金异种搅拌摩擦焊的影响
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2024-04-27
err31
PREAI
errAbdollahzadeh, Amin; Vanani, Behrouz Bagheri; Koohdar, Hamidreza; Jafarian, Hamid Reza
err分享
err收藏
Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2022-12-12
err2
PREAI
errAbdollahzadeh, Amin; Bagheri, Behrouz; Shamsipur, Ali
err分享
err收藏
Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2022-10-12
err69
PREAI
errBagheri, Behrouz; Shamsipur, Ali; Abdollahzadeh, Amin; Mirsalehi, Seyyed Ehsan
err分享
err收藏
Novel high entropy intermetallic compounds: Synthesis and detonation spraying (vol 146, 107591, 2022)
errINTERMETALLICS
IF4.8
err2022-09-01
err0
PREAI
errMoghaddam, Ahmad Ostovari; Abdollahzadeh, Amin; Samodurova, Marina; Shaburova, Nataliya; Mikhailov, Dmitry; Fereidonnejad, Rahele; Zhivulin, Vladimir; Trofimov, Evgeny
err分享
err收藏
Novel high entropy intermetallic compounds: Synthesis and detonation spraying新型高熵金属间化合物的合成与爆炸喷涂
errINTERMETALLICS
IF4.8
err2022-07-01
err19
PREAI
errMoghaddam, Ahmad Ostovari; Abdollahzadeh, Amin; Samodurova, Marina; Shaburova, Nataliya; Mikhailov, Dmitry; Fereidonnejad, Rahele; Zhivulin, Vladimir; Trofimov, Evgeny
err分享
err收藏
Different Attempt to Improve Friction Stir Brazing: Effect of Mechanical Vibration and Rotational Speed改善搅拌摩擦钎焊的不同尝试: 机械振动和转速的影响
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2022-01-27
err42
PREAI
errBagheri, Behrouz; Abbasi, Mahmoud; Sharifi, Farzaneh; Abdollahzadeh, Amin
err分享
err收藏
Investigation into novel multipass friction stir vibration brazing of carbon steels
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2021-11-18
err40
PREAI
errBagheri, Behrouz; Abbasi, Mahmoud; Sharifi, Farzaneh; Abdollahzadeh, Amin
err分享
err收藏
On the application of NbTaTiVW refractory high entropy alloy particles in the manufacturing process of WC based matrix body drill bits
errINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
IF4.6
err2021-09-01
err22
PREAI
errMoghaddam, Ahmad Ostovari; Pasandideh, Javad; Abdollahzadeh, Amin; Shaburova, Natalia A.; Trofimov, Evgeny
err分享
err收藏
Additive manufacturing of high entropy alloys: A practical review高熵合金的增材制造: 实践综述
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2021-06-01
err280
PREAI
errMoghaddam, Ahmad Ostovari; Shaburova, Nataliya A.; Samodurova, Marina N.; Abdollahzadeh, Amin; Trofimov, Evgeny A.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
A
A.H. Kokabi
H 指数: 54 · 论文数: 205
A
Alexander P. Zhilyaev
H 指数: 53 · 论文数: 216
J
José-María Cabrera
H 指数: 47 · 论文数: 336
B
Behrouz Bagheri
H 指数: 46 · 论文数: 86
M
Mahmoud Abbasi
H 指数: 43 · 论文数: 111
查看更多