A. Molinari - Publications, H-index & Citations

A. Molinari

University of Trento

42H指数

312论文数

7.5K被引数

收录论文 85

发表时间

Unveiling the impact of nitriding and PVD coating on the fatigue properties of L-PBF maraging steel 揭示氮化和PVD涂层对L-PBF马氏体时效钢疲劳性能的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-07-01

OAAI

Tekin, T.; Ischia, G.; Naclerio, F.; Ipek, R.; Bandini, M.; Molinari, A.; Benedetti, M.

Tensile ductility of a duplex surface treated maraging steel produced by Laser Powder Bed Fusion: Interaction between the inhomogeneous microstructure and transformation induced plasticity 激光粉末床熔融生产的双相表面处理马氏体时效钢的拉伸延展性: 不均匀微观结构与相变诱发塑性之间的相互作用

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-01-01

OAAI

Tekin, T.; Ischia, G.; Naclerio, F.; Ipek, R.; Molinari, A.

Binder jet 3D printing of 316L stainless steel: A Taguchi analysis of the dependence of density and mechanical properties on the printing parameters

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-01-01

OAAI

Zago, M.; Segata, G.; Perina, M.; Molinari, A.

Interaction between inclusions and the TRIP effect during tensile loading of an L-PBF 18Ni-300 maraging steel and effect on ductility L-pbf 18Ni-300马氏体时效钢的拉伸载荷过程中夹杂物与TRIP效应之间的相互作用及其对延展性的影响

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-11-01

OAAI

Tekin, T.; Naclerio, F.; Ipek, R.; Molinari, A.

Mitigation of gravity-induced distortions of binder-jetting components during rotational sintering

ADDITIVE MANUFACTURING LETTERS

IF4.7

2024-07-01

OAAI

Grippi, Thomas; Torresani, Elisa; Rios, Alberto Cabo; Maximenko, Andrii L.; Zago, Marco; Cristofolini, Ilaria; Molinari, Alberto; Bordia, Rajendra K.; Olevsky, Eugene A.

Laser-Directed Energy Deposition of Dissimilar Maraging Steels with a Defect-Free Interface: Design for Improved Surface Hardness and Fracture Toughness

METALS AND MATERIALS INTERNATIONAL

IF4

2023-05-09

OAAI

Deirmina, Faraz; Amirabdollahian, Sasan; Harris, Luke; Bettini, Eleonora; Siriki, Raveendra; Pellizzari, Massimo; Bosetti, Paolo; Molinari, Alberto

Effect of a direct aging heat treatment on the microstructure and the tensile properties of a 18Ni-300 maraging steel produced by Laser Powder Bed Fusion

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-05-01

PREAI

Tekin, T.; Ischia, G.; Naclerio, F.; Ipek, R.; Molinari, A.

Role of surface carbon nanolayer on the activation of flash sintering in tungsten carbide

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2023-02-01

PREAI

Mazo, Isacco; Vanzetti, Lia E.; Molina-Aldareguia, Jon M.; Molinari, Alberto; Sglavo, Vincenzo M.

Room temperature stability, structure and mechanical properties of cubic tungsten carbide in flash sintered products

JOURNAL OF MATERIALS SCIENCE

IF3.9

2023-01-04

PREAI

Mazo, Isacco; Molina-Aldareguia, Jon M.; Molinari, Alberto; Sglavo, Vincenzo M.

Localized Defects in Cold Die-Compacted Metal Powders

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING

IF3.3

2022-12-06

OAAI

Torresani, Elisa; Ischia, Gloria; Molinari, Alberto

Effect of heat treatment temperature and turning residual stresses on the plain and notch fatigue strength of Ti-6Al-4V additively manufactured via laser powder bed fusion

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2022-09-01

PREAI

Emanuelli, L.; Molinari, A.; Facchini, L.; Sbettega, E.; Carmignato, S.; Bandini, M.; Benedetti, M.

Effect of pressure on the electrical resistance flash sintering of tungsten carbide

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2022-05-01

OAAI

Mazo, Isacco; Molinari, Alberto; Sglavo, Vincenzo M.

Electrical resistance flash sintering of tungsten carbide 碳化钨的电阻闪光烧结

MATERIALS & DESIGN

IF7.9

2022-01-01

OAAI

Mazo, Isacco; Molinari, Alberto; Sglavo, Vincenzo M.

Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting 工艺参数、脱脂和烧结对粘结剂喷射法制备316L不锈钢显微组织的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-11-01

PREAI

Lecis, Nora; Mariani, Marco; Beltrami, Ruben; Emanuelli, Lorena; Casati, Riccardo; Vedani, Maurizio; Molinari, Alberto

Effect of nanostructure on phase transformations during heat treatment of 2024 aluminum alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-09-01

OAAI

Demetrio, K. B.; Nogueira, A. P. G.; Menapace, C.; Bendo, T.; Molinari, A.

Towards controlling intrinsic heat treatment of maraging steel during laser directed energy deposition 激光定向能量沉积过程中马氏体时效钢的本征热处理控制

SCRIPTA MATERIALIA

IF5.6

2021-08-01

PREAI

Amirabdollahian, Sasan; Deirmina, Faraz; Harris, Luke; Siriki, Raveendra; Pellizzari, Massimo; Bosetti, Paolo; Molinari, Alberto

Uniaxial static mechanical properties of regular, irregular and random additively manufactured cellular materials: Nominal vs. real geometry

FORCES IN MECHANICS

IF3.5

2021-07-01

OAAI

Raghavendra, Sunil; Molinari, Alberto; Dallago, Michele; Zappini, Gianluca; Zanini, Filippo; Carmignato, Simone; Benedetti, Matteo

Tempering behavior of a direct laser deposited hot work tool steel: Influence of quenching on secondary hardening and microstructure

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-05-01

PREAI

Amirabdollahian, Sasan; Deirmina, Faraz; Pellizzari, Massimo; Bosetti, Paolo; Molinari, Alberto

Quasi-static compression and compression-compression fatigue behavior of regular and irregular cellular biomaterials 规则和不规则细胞生物材料的准静态压缩和压缩-压缩乏力行为

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2021-02-07

OAAI

Raghavendra, Sunil; Molinari, Alberto; Cao, Anni; Gao, Chao; Berto, Filippo; Zappini, Gianluca; Benedetti, Matteo

Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion 能量密度对激光粉末床熔融Ti-6Al-4V组织和织构演变的影响

MATERIALS CHARACTERIZATION

IF5.5

2020-05-01

PREAI

Cepeda-Jimenez, C. M.; Potenza, F.; Magalini, E.; Luchin, V; Molinari, A.; Perez-Prado, M. T.

研究方向