logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
E

Enrico Savio

university of Padova

29H指数
149论文数
2.8K被引数
收录论文 50
发表时间
logo
A metrological digital twin of nanoindentation for out-of-control measurements identification纳米压痕的计量学数字孪生用于失控测量识别
errMeasurement
IF5.6
err2026-08-27
err0
errOAAI
errGiacomo Maculotti; Lorenzo Giorio; Gianfranco Genta; Rachele Bertolini; Enrico Savio; Maurizio Galetto
err分享
err收藏
Manufacturing of structured surfaces for tissue engineering and regenerative medicine用于组织工程和再生医学的结构化表面制造
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2026-06-12
err0
errOAAI
errGiovanni Lucchetta; Fengzhou Fang; Weiguang Wang; Enrico Savio
err分享
err收藏
Topology-driven dimensional stability of micro-milled structures on Laser Directed Energy Deposition (L-DED) Inconel 718 after precipitation hardening拓扑驱动下时效硬化后激光定向能量沉积(L-DED)Inconel 718上微铣结构的尺寸稳定性
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-05-04
err0
errOAAI
errCleiton Lazaro Fazolo de Assis; Alessandro Roger Rodrigues; Carlos Alberto Fortulan; Reginaldo Teixeria Coelho; Sofia Catalucci; Enrico Savio
err分享
err收藏
The combined effect of microstructure anisotropy and surface integrity on the fatigue resistance of AM and wrought Ti6Al4V titanium alloy微观结构各向异性与表面完整性对增材制造和锻造Ti6Al4V钛合金疲劳抗力的影响
errCIRP Annals
IF0
err2026-04-15
err0
errOAAI
errRachele Bertolini; Andrea Stramare; Alberto Campagnolo; Andrea Ghiotti; Enrico Savio; Stefarnia Bruschi
err分享
err收藏
Biomaterial used to counteract ridge reduction following the removal of adjacent teeth: A randomized controlled multicenter study用于对抗拔除相邻牙齿后牙槽嵴减少的生物材料：一项随机对照多中心研究
errJournal of Periodontology
IF3.8
err2026-03-01
err0
errOAAI
errCecchinato, Denis; Corra, Enrico; Bressan, Eriberto; Gervasi, Marika; Menoncin, Marco; Savio, Enrico; Toia, Marco
err分享
err收藏
Metrological validation of a deep learning pipeline for in-line detection and dimensional quantification of three-dimensional surface defects计量学验证：一种用于在线检测和三维表面缺陷尺寸量化的深度学习流程
errCIRP Journal of Manufacturing Science and Technology
IF5.4
err2025-12-08
err0
errOAAI
errSofia Catalucci; Enrico Savio
err分享
err收藏
A novel study on camera calibration and deep learning based processing techniques for efficient machine vision inspection一项关于相机标定和基于深度学习的处理技术以实现高效机器视觉检测的新研究
errMeasurement Science and Technology
IF3.4
err2025-07-29
err0
PREAI
errAbdelali Taatali; Sif Eddine Sadaoui; Mohamed Abderaouf Louar; Brahim Mahiddini; Sofia Catalucci; Enrico Savio
err分享
err收藏
From Hydrophilic to Superhydrophobic: Tuning Surface Wettability through Salvinia-Inspired Topographies从亲水到超疏水：通过Salvinia启发型拓扑结构调控表面润湿性
errACS Applied Materials & Interfaces
IF8.2
err2025-07-25
err0
errOAAI
errKai Liu; Marco Sorgato; Enrico Savio
err分享
err收藏
The role of PEEK viscoelasticity in chip formation, surface finish and geometrical accuracyPEEK粘弹性在切屑形成、表面光洁度和几何精度中的作用
errCIRP Annals
IF0
err2025-05-05
err0
errOAAI
errR. Bertolini; A. Bottin; C. Zanella; S. Bruschi; A. Ghiotti; E. Savio
err分享
err收藏
Impact of drill bit wear on temperature increase in dental implant osteotomy: an in vitro study钻头磨损对牙种植体骨切口温度升高的影响：一项体外研究
errPLOS ONE
IF2.6
err2025-03-19
err0
errOAAI
errSorgato, Marco; Bottin, Anna; Stocchero, Michele; Toia, Marco; Savio, Enrico
err分享
err收藏
On the role of metal surface modification and polymer matrix characteristics when drilling thermoplastic fibre metal laminates
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err2
errOAAI
errBertolini, R.; Stramare, A.; Sorgato, M.; Savio, E.; Ghiotti, A.; Bruschi, S.
err分享
err收藏
Integrated metrology for advanced manufacturing面向先进制造的集成计量
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err6
errOAAI
errArchenti, Andreas; Gao, Wei; Donmez, Alkan; Savio, Enrico; Irino, Naruhiro
err分享
err收藏
Determination of uncertainty of coordinate measurements on the basis of the formula for EL,MPE
errMEASUREMENT
IF5.6
err2023-11-01
err3
errOAAI
errWojtyla, Miroslaw; Rosner, Pawel; Plowucha, Wojciech; Balsamo, Alessandro; Piccato, Aline; Forbes, Alistair B.; Savio, Enrico
err分享
err收藏
A process chain for the mass production of nanopatterned bactericidal plastic parts
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2023-01-01
err2
errOAAI
errSorgato, Marco; Brun, Paola; Savio, Enrico; Lucchetta, Giovanni
err分享
err收藏
Surface integrity and superelastic response of additively manufactured Nitinol after heat treatment and finish machining
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2023-01-01
err5
errOAAI
errBertolini, R.; Bruschi, S.; Ghiotti, A.; Savio, E.; Ceseracciu, L.; Jawahir, I. S.
err分享
err收藏
Validation of the sensitivity analysis method of coordinate measurement uncertainty evaluation
errMEASUREMENT
IF5.6
err2022-08-01
err7
errOAAI
errWojtyla, Miroslaw; Rosner, Pawel; Plowucha, Wojciech; Forbes, Alistair B.; Savio, Enrico; Balsamo, Alessandro
err分享
err收藏
The implication and evaluation of geometrical imperfections on manufactured surfaces
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2022-01-01
err10
PREAI
errMullany, B.; Savio, E.; Haitjema, H.; Leach, R.
err分享
err收藏
Ti6Al4V titanium alloy fatigue strength after AM- and machining-based process chains
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2022-01-01
err9
PREAI
errGhiotti, Andrea; Bertolini, Rachele; Sorgato, Marco; Campagnolo, Alberto; Savio, Enrico; Bruschi, Stefania
err分享
err收藏
Surface texturing to enhance sol-gel coating performances for biomedical applications
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2021-01-01
err6
errOAAI
errGhiotti, Andrea; Bertolini, Rachele; Pezzato, Luca; Savio, Enrico; Terzini, Mara; Bruschi, Stefania
err分享
err收藏
On-machine and in-process surface metrology for precision manufacturing用于精密制造的在机和过程中表面计量学
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2019-01-01
err285
errOAAI
errGao, W.; Haitjema, H.; Fang, F. Z.; Leach, R. K.; Cheung, C. F.; Savio, E.; Linares, J. M.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
I
I.S. Jawahir
H 指数: 66 · 论文数: 308
F
Fengzhou Fang
H 指数: 60 · 论文数: 526
R
Richard Leach
H 指数: 52 · 论文数: 539
C
Chi Fai Cheung
H 指数: 51 · 论文数: 651
高伟 封面图
高伟 (Wei Gao)
H 指数: 49 · 论文数: 772
查看更多