Towards High Throughput Structuring of Liquid Foams in Microchannels: Effect of Geometry, Flowrate and FormulationMICROMACHINESIF32021-11-180OAAI
Experimental determination and modeling of flow curves of xanthan gum solutions over a large range of shear ratesAPPLIED RHEOLOGYIF1.82021-07-3112OAAI
Production of oil in water emulsions in microchannels at high throughput: Evaluation of emulsions in view of cosmetic, nutraceutical or pharmaceutical applicationsCHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATIONIF3.92021-04-0112OAAI
Fast oil-in-water emulsification in microchannel using head-on impinging configuration: Effect of swirl motionINTERNATIONAL JOURNAL OF MULTIPHASE FLOWIF3.82020-10-0118OAAI
Investigation of gas/shear-thinning liquids flow at high throughput in microchannels with the aim of producing biosourced foamCHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATIONIF3.92020-02-0111OAAI
Deformation of gas-liquid interfaces in a non-Newtonian fluid at high throughputs inside a microfluidic device and effect of an expansion on bubble breakup mechanisms微流体设备内部高通量非牛顿流体中气液界面的变形以及膨胀对气泡破裂机理的影响CHEMICAL ENGINEERING SCIENCEIF4.32020-02-017OAAI
Experimental investigation of emulsified fuels produced with a micro-channel emulsifier: Puffing and micro-explosion analysesFUELIF7.52018-05-0141PREAI
Study of two impinging flow microsystems arranged in series. Application to emulsified biofuel productionFUELIF7.52016-04-0120PREAI
Characteristics of foams produced with viscous shear thinning fluids using microchannels at high throughputJOURNAL OF FOOD ENGINEERINGIF5.82016-03-0115PREAI
Water-in-oil emulsification in a microfluidic impinging flow at high capillary numbersINTERNATIONAL JOURNAL OF MULTIPHASE FLOWIF3.82015-06-0131PREAI
Rheological properties of food foams produced by SMX static mixersFOOD HYDROCOLLOIDSIF12.42015-01-0121PREAI
Flow process conditions to control the void fraction of Thud foams in static mixersJOURNAL OF FOOD ENGINEERINGIF5.82014-05-0114OAAI
Numerical and experimental investigations of mixing in T-shaped and cross-shaped micromixersCHEMICAL ENGINEERING SCIENCEIF4.32012-01-0190PREAI
About a correlating equation for predicting pressure drops through packed beds of spheres in a large range of Reynolds numbersCHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATIONIF3.92007-04-01118PREAI
Macrostructural characterization of granular activated carbon bedsJOURNAL OF MATERIALS SCIENCEIF3.92005-02-0116PREAI
Liquid-solid mass transfer in packed beds of multisized cylindersCHEMICAL ENGINEERING RESEARCH & DESIGNIF3.92003-10-014PREAI
Modelling of power law liquid-solid mass transfer in packed beds at Darcy regimeCHEMICAL ENGINEERING JOURNALIF13.22002-10-017PREAI
Experimental characterization of flow regimes in various porous media - III: limit of Darcy's or creeping flow regime for Newtonian and purely viscous non-Newtonian fluidsCHEMICAL ENGINEERING SCIENCEIF4.32000-08-01106PREAI
Characterization and modeling of the hydrodynamic behavior in the filter-press-type FM01-LC electrochemical cell by direct flow visualization and residence time distributionINDUSTRIAL & ENGINEERING CHEMISTRY RESEARCHIF3.92000-05-2741PREAI