.png){kind=icon}
返回
Electrically-induced ionic wind flow distribution and its application for LED cooling
.png){kind=icon}
PRE
AI
DOI：10.1016/j.applthermaleng.2018.04.091.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Enhanced heat transfer based on electrohydrodynamic (EHD) is considered as energy efficient non-thermal technology appropriate for thermal management of microelectronic products. A 'multiple-needles-to-mesh' electrostatic fluid accelerator (EFA) was proposed and experiments were carried out to clarify the ionic wind distribution characteristic and to evaluate the energy efficiency of the device. A developed prototype of EFA was then manufactured and applied for cooling high power LEDs. The results revealed significant effects of discharge gap, radius of needle tip curvature, distance between adjacent needles, power polarity and corona power on ionic wind flow distribution. The electric current density is highly uneven which lead to inhomogeneous ionic wind distribution. The maximum ionic wind velocity was obtained close to the emitting electrode and the maximum cone angle of the designed EFA is 61.6 degrees. The experimental study indicated that the designed EFA was effective for heat dissipation of high power LEDs in application. The attenuation rate of luminous flux and the rise rate of junction temperature were much lower than traditional cooling devices.
Keyword:
Ionic wind
Electrohydrodynamics
Energy efficiency
Light-emitting diode
Heat dissipation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.9
论文数:
2.8W
被引数:
10.6W
机构
引用论文
.png){kind=icon}
分享收藏分享收藏分享收藏Experimental investigation of high-power light-emitting diodes' thermal management by ionic wind
PREAI
分享收藏
查看更多内容