返回
Variable-step integration method for milling chatter stability prediction with multiple delays
DOI:10.1007/s11431-011-4599-2.png)
摘要
En 中文
This paper analyzes the stability of milling with variable pitch cutter and tool runout cases characterized by multiple delays, and proposes a new variable-step numerical integration method for efficient and accurate stability prediction. The variable-step technique is emphasized here to expand the numerical integration method, especially for the low radial immersion cases with multiple delays. First, the calculation accuracy of the numerical integration method is discussed and the variable-step algorithm is developed for milling stability prediction for single-delay and multiple-delay cases, respectively. The milling stability with variable pitch cutter is analyzed and the result is compared with those predicted with the frequency domain method and the improved full-discretization method. The influence of the runout effect on the stability boundary is investigated by the presented method. The numerical simulation shows that the cutter runout effect increases the stability boundary, and the increasing stability limit is verified by the milling chatter experimental results in the previous research. The numerical and experiment results verify the validity of the proposed method.
Keyword:
variable-step
numerical integration method
milling
chatter
stability prediction
multiple delays
variable pitch cutter
cutter runout
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
5.0K
被引数:
9.9K
机构
引用论文
4-Mercaptophenyldiphenylphosphine as linker to immobilize Pd onto the surface of magnetite nanoparticles. Excellent catalytic efficiency of the system after partial linker removal
RSC Advances
IF0
Solvent-free one-pot oxidation of ethylarenes for the preparation of α-ketoamides under mild conditions
RSC Advances
IF0

